Parts for Husqvarna RZ3016 (966042901): 30" Deck Parts

This part is a replacement mandrel pulley keeper. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken mandrel pulley keeper in lawn tractors.Mandrel pulley keepers help to hold the mandrel pulley in place. They are important for proper equipment functionality and should be replaced if broken, corroded, snapped, or otherwise rendered ineffective. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this particular mandrel pulley keeper, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This mandrel pulley keeper can be used with a variety of lawn tractor models manufactured by Husqvarna, Poulan, and other brands.

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This is a genuine replacement blade for select mulching riding lawn mowers. The mower/mulch blade includes a center hole for attaching to the mandrel assembly with a bolt or nut. When secured and properly sharpened, the blade will cut the grass into fine clippings that can be left behind for mulching. Over time, this blade is subjected to regular use, repetitive motion, and potential ground contact. Other damage can also occur, such as if the mower hits a stump or a rock. In the event that the blade is warped, damaged, or dull, it needs to be replaced immediately. This genuine OEM mulching mower blade is designed for use with compatible riding lawn mowers from Poulan, Jonsered, and Husqvarna. There are more than 90 models that take this blade. This durable blade is made from high-quality metal and sold as a single unit. Hardware is not included with this purchase and will have to be purchased separately if it is required. The blade can be replaced with a wrench. Be sure to disconnect the spark plug and/or battery for safety before working on the blade or other moving parts.

This idler pulley is an authentic OEM replacement part sourced directly from the manufacturer. This pulley guides the drive belt on riding lawn mowers to turn the blades that cut the grass. If the pulley is not working properly, or if it seizes or is jammed, the blades will not turn to cut grass. This can happen if large objects are run over and become lodged under the deck. If the pulley comes in contact with large stationary objects like hidden rocks, it may be damaged and not work. The idler pulley will need to be replaced if the blades are not turning.Before replacing the pulley, make sure the mower is cool to touch and remove the spark plug. Ensure that the actuator is in the off position and lower the blade to make it easier to access the pulley. Wear safety gloves to prevent injury when working with the blades. Detach all retaining pins from the deck to release them from the mower. Remove the nut holding the pulley onto the shaft and then remove the pulley and install the new one. Reverse the process to reassemble the mower. This idler pulley is a solid metal part that is sold individually. It does not come with a bolt or nut. This idler pulley is designed for use in lawnmowers and lawn tractors manufactured by Husqvarna.

This replacement part is a return spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A return spring is an essential part of many different engines. This type of spring is able to stretch and allow two different parts to work together and ensure that the machine is running smoothly. A new return spring might be needed if there are unusual noises coming from the inside of the device. It is possible that the return spring is malfunctioning or out of place. It is common that this type of spring can become stripped and snap over time. Be sure the engine is cooled down prior to attempting this repair. This spring is sold individually and is sourced from the manufacturer to ensure a proper fit in many devices. This is also a genuine OEM replacement part.

This replacement part is a torsion spring. This is a genuine replacement part made by Husqvarna. This part works within a machine to provide torque to different parts so that the machine can run smoothly and properly. A new torsion spring might be needed if the current one is missing or damaged in any way including being dented or bent. Because of the nature of the spring, this part could snap under pressure and need to be replaced. Work gloves are recommended during this repair as springs can be dangerous if handled improperly. Be sure the engine is off before starting this repair as running parts may affect the installation.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This top lock flange nut is a genuine Husqvarna part, sold individually. This top lock flange nut can be used as a replacement part for lawn mowers. The purpose of a top lock flange nut is to provide a fastening component, in conjunction with a bolt, through which two parts can be affixed to one another through clamping and rotation.The top lock flange nut is a small fastening component that can be easily lost and misplaced. If components come loose as a result of a lost top lock flange nut, the component should be replaced by this genuine OEM replacement part. Additionally, over time, a top lock flange nut can be stripped or eroded beyond functionality, in which case the component should be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This top lock flange nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Dixon, Poulan, and Aries.

This part is a replacement blade drive belt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current blade drive belt is broken, snapped, or defective, this part can be used as a replacement. It is intended for use with a variety of lawn tractor models. The blade drive belt rotates the blades of the lawn tractor by attaching them to the pulley. If the belt is worn, snapped, or otherwise damaged, the blades may not spin and the lawn tractor will be unusable. Thus, the belt should be kept in good condition. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this particular blade drive belt, the appropriate owner's manual and equipment diagrams should be referred to. This blade drive belt is suitable for use on a variety of lawn tractor models manufactured by Husqvarna, Poulan, and other brands. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

The washout port helps to make cleaning a mower deck easier and it is used on mowers and tractors. Users should wash the deck of the mower to reduce buildup. Doing so will help owners to extend the life of the mower deck. The washout port is the area that attaches to the deck of the machine. Owners can attach a hose and clean away grass and debris that have built up under the deck.The washout port is made from metal and is durable. However, there could still be a need to replace it in the event it becomes damaged or corroded. Replacement of the washout power is relatively simple. It will require the use of a socket set and a wrench set.This washout port is a genuine OEM replacement part for use with certain models of lawn tractors from Husqvarna, Craftsman, Jonsered, and Poulan. It is sold individually.

This part is a nyloc nut. This specific nut is used in many different applications depending upon the outdoor power equipment machine that it is used on. This nut has a nylon collar insert that resists turning when it has been threaded on correctly. The nyloc nut is a type of lock nut, which prevents loosening when it's exposed to vibrations. It helps fasten parts together.A new nyloc nut may be needed if the original one has been broken, damaged, or lost. If the nyloc nut is no longer staying in place when it is exposed to vibrations and the operator can notice the parts loosening, then the nyloc nut will need to be replaced.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This nyloc nut is used on snowblowers that are manufactured by both Husqvarna and Craftsman.

A lawn mower link lift suspension assembly is the part that lifts the mower deck. It is designed for use with outdoor lawn and garden power equipment, specifically for lawn mowers and lawn tractors. It is compatible with mowers by brands such as Craftsman, Husqvarna, Poulan, Ariens, and Dixon.The lawn mower link lift suspension assembly part is crucial if the lawn mower is to operate optimally. The purpose of the lawn mower link lift suspension assembly is to raise the mower deck off of the ground so that it can cut the grass at various heights and levels. It also impacts how much grass is mulched or collected in the bins, because the lower the deck and the higher the grass, the more that will be mowed. Without the lawn mower link lift suspension assembly part, the lawn mower deck will not lift or lower.The replacement or repair process of the lawn mower link lift suspension assembly should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This lawn mower link lift suspension assembly is an original OEM part sourced directly from the manufacturer, Husqvarna. It is sold individually.

This part is a replacement hex nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or lost hex nut in lawn tractors and other outdoor power equipment.Hex nuts are a standard piece of hardware that ensure components can be properly and securely fastened together. They will need to be replaced with a genuine OEM part if stripped, corroded, damaged, or lost. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this hex nut, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this hex nut is suitable for use on outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This flat washer is a genuine Husqvarna part, sold individually. This flat washer can be used as a replacement part in a lawn mower. The purpose of the flat washer in a lawn mower is to function within the fastening mechanisms of an appliance by fitting onto a bolt or a screw so that the spacing between one or more components is maintained while also reducing friction between those components.The washer can be easily lost or misplaced during the operation of the appliance as it is a small component that does not serve a critical function. The flat washer can also be punctured, dented, warped, or eroded over time, in which case it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This flat washer is compatible with the following outdoor appliance brands: Husqvarna.

This replacement part is a hair pin and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Hair pins are an important part of many different types of machinery as they hold other parts in place and secure. A new hair pin might be needed if the current ones are loose or missing. It is common that hair pins might become stripped overtime and will need to be replaced. Be sure to double check the size of the hair pin as many places on lawn equipment will require different sizes of this part. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in a lawn mower.The screw in a lawn mower might eventually have to be replaced if it is lost, misplaced, or stripped away from general wear and tear with long-term use. The screw is a small component that can be lost or misplaced; if this occurs, the screw should be replaced by this genuine OEM replacement part. The screw can also be damaged over time, and if its damage results in the loosening of the components to which it was affixed, the screw should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.

This genuine Husqvarnascrew can be used as a replacement part for lawn mowers and lawn tractors. The screw is a small piece that is generally used to fasten materials to one another.Screws are small parts that are frequently lost or misplaced as they can unscrew and detach without necessarily impacting the appliance immediately. They may also becoem broken, stripped, or corroded. If a screw is lost, misplaced, or suffers damage that prevents it from continuing to affix components to one another, the screw should be removed and replaced immediately with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following brands: Husqvarna, Poulan, Ariens, and Weed Eater.