Parts for Ge PVD28BYNCFS: Dispenser Door Parts

This articulating mullion assembly replaces the center mullion on compatible French-door refrigerators to restore proper door alignment and sealing. It helps the doors close evenly and reduces air leaks that can raise energy use and spoilage. What it does:

• Provides the hinged center mullion that joins and guides the two doors for smooth opening and closing
• Restores proper door alignment to help maintain an even refrigerator seal
• Helps reduce gaps that can allow cold air to escape or warm air to enter
• Addresses symptoms like uneven doors, rubbing or binding at the center, and visible gaps between doors

• Turn off power to the appliance and remove food from affected compartments before beginning work
• Use appropriate hand tools and support both doors during removal/installation; a second person may be helpful
• Inspect mounting points and door edges for damage and replace any worn fasteners if needed

A left-hand closure door assembly that replaces a worn or broken door closure to restore proper sealing and smooth drawer/door operation. Helps stop drafts and keeps compartments closing correctly for reliable performance. What it does

• Guides and supports the left-side door/drawer as it closes to ensure proper alignment.
• Helps form a tight seal to reduce air leakage and maintain interior temperature.
• Prevents rattling or catching that can occur when the closure is damaged or worn.
• Commonly replaced when the door doesn't stay closed, binds, or leaves a visible gap.

• Disconnect power to the appliance before starting any repair.
• Basic hand tools are typically required; access may involve removing a drawer or trim panel.
• Handle parts carefully to avoid damaging surrounding panels or gaskets.

The Fastener Door Handle is an OEM component for GE refrigerators. This door handle provides a comfortable grip for accessing refrigerator shelves and bins. It attaches securely to the refrigerator door through durable metal fasteners. 

Causes for a bad door handle could be cracks, damage, or stripped fastener holes resulting in a loose or detached handle. Regularly gripping and lifting may also cause normal wear over time.

Symptoms of a failing door handle include:

• The handle detaching completely from the door  
• Looseness making the handle wobbly or unstable to hold
• Sharp edges or broken parts posing a safety risk

This OEM GE handle is also compatible with Hotpoint, RCA, and select Kenmore refrigerator models.

This stainless refrigerator door handle replaces a damaged or worn pull to restore a secure grip and clean appearance. It provides a direct, OEM-style replacement for refrigerators with a matching handle mount. What it does:

• Replaces a cracked, bent, or heavily scratched door handle
• Restores safe, easy door opening and closing when the original handle fails
• Matches stainless finishes for a consistent look on the refrigerator exterior
• Uses the factory mounting points for a direct-fit replacement

• Use the factory screws and hardware; if original fasteners are missing, obtain the correct hardware before starting
• Tighten mounting screws securely but avoid over-torquing to prevent handle or door damage
• Disconnect power to the appliance if removing nearby trim or panels that expose electrical components

This set screw secures refrigerator components—most commonly door handles—to their mounting studs. Replacing a missing or stripped screw restores a solid, secure feel and helps prevent loose or wobbly handles.

• Locks the handle to its mounting stud to keep it tight and secure
• Helps resolve a loose, wobbly, sliding, or rattling handle
• Replaces a missing, rounded, or damaged set screw
• Helps maintain proper handle alignment and consistent door operation

• Unplug the appliance or switch off power before servicing
• Ensure the handle is fully seated on the studs before tightening
• Start the screw by hand to avoid cross-threading; then tighten until snug
• Do not overtighten to prevent stripping the screw or handle threads

This clear upper-left door bin replaces a cracked, broken or missing refrigerator door shelf so you can securely store condiments and small items in the door. It restores proper fit and keeps contents organized. What it does

• Provides a molded shelf on the refrigerator door for storing bottles, jars and small containers
• Replaces damaged or cracked door bin that causes items to fall or not sit securely
• Restores original door storage alignment and prevents rattling or loose items
• Fits into the upper-left position of the door and snaps into the factory mounting supports

• One clear upper-left door bin

• Remove all food and loose items from the door before removing the old bin
• Lift or unclip the old bin per your model's instructions, then align and snap the replacement into the door supports
• Clean with mild detergent and a soft cloth; avoid abrasive cleaners that can scratch the plastic
• Handle carefully to avoid cracking during installation

This clear center-left door bin replaces a cracked or worn refrigerator door shelf to restore secure storage and easy access to bottles and small items. Durable plastic design keeps contents visible and organized on the fridge door. What it does:

• Provides a stable shelf on the refrigerator door for bottles, jars and small containers
• Restores proper storage when the original bin is cracked, broken or missing
• Keeps door items visible and prevents shifting during normal use
• Matches OEM mounting points for straightforward fit in the designated left-center position

• Empty the door shelf area and remove any remaining bins or inserts before installing
• Align the bin with the door mounting rails and gently snap or slide into place until secure
• Replace any cracked or sharp pieces carefully; wear gloves to protect hands when removing broken plastic
• If the bin does not seat smoothly, check for obstructions or damaged mounting clips before forcing

This auger motor powers the ice-dispensing auger, turning and feeding ice from the freezer bin to the dispenser for smooth delivery. Replaces a worn or non-turning dispenser motor to restore ice dispensing function. What it does:

• Drives the auger shaft in the ice bin so ice is moved forward to the dispenser chute
• Stops rotation if motor fails, causing no ice to dispense
• Helps eliminate intermittent dispensing or reduced ice output when functioning properly

• Disconnect power to the appliance before beginning any work
• Remove the ice bin and access panels per your model's service instructions
• Inspect the auger, shaft, and bin for jams or broken fins before replacing the motor

This molded white port collar trims and seals the ice box opening where the ice maker or fill tube passes through the freezer liner, restoring a finished look and helping reduce air gaps that can affect performance. What it does:

• Provides a finished trim and secure mounting around the ice box/ice maker port
• Helps seal the opening to limit air infiltration and reduce frosting around the port
• Centers and supports the ice maker fill tube or port assembly for reliable alignment
• Replaces cracked, warped or missing collars that can expose edges or allow gaps

• One white ice box port collar

• Disconnect power to the appliance before servicing
• Remove ice maker or trim pieces as needed for access; defrost ice build-up if required
• Press the collar into the liner opening until it snaps into place; do not force if resistance is excessive
• Inspect surrounding liner for damage; replace collar if warped, cracked, or brittle

This white ice box port gasket seals the ice compartment door opening to help maintain proper cold airflow and reduce frost and moisture buildup in the freezer section. Restores a tighter seal for more consistent cooling. What it does

• Provides a replacement seal around the ice box port to help keep cold air inside the compartment.
• Reduces frost accumulation and water intrusion that can form around a worn or cracked gasket.
• Helps the freezer maintain even temperatures by preventing air leaks at the ice box opening.
• Can improve ice quality and reduce cycling if the original gasket no longer seals properly.

• Disconnect power to the appliance before beginning any repair.
• Remove the old gasket completely and clean the mating surface of all debris and adhesive residue.
• Inspect the door/frame for damage before installing; align the new gasket evenly to ensure a continuous seal.
• Use OEM-recommended adhesive or fasteners only; avoid stretching the gasket during installation.

This ice funnel and duct door directs ice from the ice maker into the dispenser chute and helps seal the freezer/dispense area to limit airflow and moisture. It replaces a cracked, warped, or missing chute component to restore proper ice flow. What it does

• Guides ice from the ice maker into the dispenser so cubes drop cleanly into the bin or dispenser.
• Helps block warm air and moisture from entering the ice path, reducing clumping and icing issues.
• Prevents jams and misfeeds caused by a broken or distorted funnel/door.
• Works with the dispenser mechanism to allow controlled release of ice.

• One ice funnel and duct door assembly.

• Disconnect power to the appliance before starting any repair to avoid electrical shock.
• Remove ice maker and surrounding trim panels as required to access the funnel; keep fasteners for reinstallation.
• Handle plastic parts carefully to avoid cracking; align tabs and snap the door/funnel into place before securing.

The Duct Door Motor is an OEM replacement part for GE refrigerators. It is designed to control the opening and closing of the dispenser door, allowing for the release of ice from the dispenser.

A bad dispenser duct door motor can occur due to various factors, including normal wear and tear, motor failure, or damage to the motor mechanism. If you notice symptoms such as the dispenser duct door not opening or closing properly, or failure to dispense ice or water, it may indicate a need to replace the dispenser duct door motor.

Symptoms of a bad dispenser duct door motor include:

• Dispenser duct door not opening or closing properly
• Failure to dispense ice or water

Restore your refrigerator's dispenser system by replacing the faulty dispenser duct door motor with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This duct door spring secures and returns the exhaust/vent door so airflow opens and closes properly, helping maintain correct ventilation. Replaces a worn or broken spring to restore normal vent operation and reduce drafts. What it does

• Provides tension to the exhaust/duct door so it opens when ventilation starts and closes when idle.
• Restores proper airflow control when the vent door fails to stay open.
• Helps prevent backdrafts and reduces unwanted air exchange when the appliance is off.
• Common symptom: vent/duct door hangs open, won't latch, or won't return to closed position.

• One duct door spring

• Disconnect power to the appliance before starting any repair.
• Access may require removing the vent/duct door assembly or outer access panel; keep track of fasteners.
• Use caution when handling springs — they may be under tension; wear eye protection and gloves.

This dispenser paddle assembly replaces a damaged or worn dispenser actuator on profile-style refrigerator doors so your dispenser responds properly when pressed. It restores reliable user control for water and ice dispensing without replacing the whole door. What it does:

• Acts as the user-facing paddle that engages the dispenser switch when pressed
• Replaces broken, cracked or loose paddles that won't reliably activate the dispenser
• Helps stop intermittent dispensing or a paddle that sticks or fails to return
• Matches the profile-style dispenser opening for correct fit and operation

• One dispenser paddle assembly (profile-style)

• Disconnect power to the refrigerator before beginning work
• Basic hand tools typically required; handle trim pieces carefully to avoid damage
• Align paddle with the dispenser switch and mounting tabs; do not force parts

This door board is the electronic control module that mounts in the refrigerator door to manage dispenser and door-mounted functions, restoring responsive controls and display feedback. What it does

• Receives user input from the dispenser/door control panel and sends signals to the main control
• Controls dispenser motor/solenoid and display/LED indicators for door functions
• Helps resolve symptoms like unresponsive dispenser buttons, incorrect door display messages, or intermittent door control behavior
• Works with door-mounted sensors and switches to coordinate dispensing and user commands

• One door board (electronic door control) as shown

• Disconnect power at the appliance or breaker before starting to avoid shock
• Remove interior door panel or dispenser bezel carefully to access the board and wiring harness
• Note connector locations and orientation; disconnect harnesses gently and avoid pulling on wires
• Handle the board by edges and avoid electrostatic discharge—use a grounded strap if available

This electronic dispenser control board operates the refrigerator's autofill and dispenser functions, restoring reliable water delivery and dispenser response. Designed as a direct replacement for the dispenser control assembly. What it does:

• Controls autofill and dispenser valve operations for timed water delivery
• Sends/receives signals to the dispenser interface and water valve to start/stop filling
• Helps resolve no-water, intermittent dispense, or dispenser control unresponsiveness
• Works with the dispenser user interface and related sensors to coordinate fills

• One autofill dispenser control board

• Disconnect power (and water if applicable) before removing panels or wiring
• Handle the board by edges and avoid static discharge; ground yourself before touching connectors
• Secure boards and panels per factory location
• Test dispenser functions after reassembly and restore power/water supply

The Stainless Drip Tray Cover is an OEM part for GE side by side refrigerators. It serves as the cover for the bottom drip tray in the refrigerator, allowing any spills or condensation to properly drain away while also keeping the drain area clean and hygienic. 

Causes of a bad drip tray cover can include wear and tear from repeated cleaning, damage from impact or excessive weight, or warping due to moisture. 

Symptoms of a bad drip tray cover include:

• Leaks or drips from the bottom of the refrigerator  
• An unpleasant musty smell 
• Accessible drainage area allowing for mildew or bacteria growth

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This stainless-steel drip tray catches spills and condensation under your appliance, protecting the cabinet and floor while keeping the area tidy. Durable metal construction resists corrosion and wipes clean for simple maintenance. What it does

• Collects water, drips and overflow from the appliance to prevent damage to surrounding cabinetry and flooring
• Direct-fit replacement designed to restore proper drainage and containment
• Stainless finish resists stains and is easy to clean with a damp cloth
• Helps reduce odors and mildew by containing spills until cleaned

• Designed as a direct-replacement; no modification expected
• Power off and disconnect the appliance if required to access the tray area
• Handle with care to avoid sharp edges; use gloves if needed
• Clean mounting area before installing the new tray to ensure proper seating

This is a replacement 8-18 x 1/2" flat-head slotted screw commonly used to secure appliance panels and components. It restores proper fastening and helps eliminate rattles, loose trim, or misaligned parts. What it does:

• Secures panels, brackets, and trim to restore proper fit
• Stops vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to prevent parts from shifting
• Works where a flat-head, slotted-drive #8 screw with 1/2" length is required

• One 8-18 x 1/2" flat-head slotted screw

• Use the correct size slotted screwdriver to avoid cam-out or head damage
• Tighten until snug; avoid over-torquing which can strip threads or deform panels
• Replace any stripped mating hardware for secure fastening
• Disconnect power before doing repairs on appliances where required for safety

This is a replacement round-head screw sized 10-24 x 5/8 in. It secures trim, panels, and internal components so parts stay aligned and appliances run quietly and safely. What it does

• Fastens panels, brackets, and trim pieces in place
• Prevents loose parts that can rattle or cause misalignment
• Replaces missing or stripped screws to restore secure mounting
• Works where a 10-24 x 5/8 round-head screw is required

• Disconnect power before servicing the appliance
• Use the proper screwdriver or nut driver to avoid stripping the head
• Align parts before tightening and thread gently to avoid cross-threading
• Do not over-tighten; stop when snug to prevent panel distortion