Parts for Ge PVD28BYNCFS: Freezer Shelves Parts

The Crossbar Right Pinion Gear is an OEM part for GE refrigerators. It is designed to fit the crossbar assembly in the freezer, ensuring smooth and efficient operation of the door.

A bad crossbar right pinion gear can be caused by normal wear and tear over time, excessive force applied to the gear, or damage due to mishandling or impact. If you notice issues such as difficulty in opening or closing the refrigerator door, a loose or sagging door, or unusual noises coming from the door mechanism, it may indicate a problem with the crossbar right pinion gear.

Symptoms of a bad crossbar right pinion gear include:

• Door not staying securely closed
• Door not aligning properly with the refrigerator frame
• Excessive play or wobbling in the door when opened or closed
• Grinding or clicking noises when operating the door

Replace your faulty crossbar right pinion gear with this OEM part to restore your refrigerator. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This left crossbar pinion gear is the replacement gear that helps the appliance's crossbar assembly transfer motion smoothly to the drum or agitator. Replacing a worn or broken pinion restores reliable rotation and reduces noise. What it does

• Engages with the crossbar to transmit rotational force for normal drum/agitator movement
• Replaces a worn, cracked, or stripped left pinion gear to stop grinding or slipping
• Helps eliminate unusual noises or uneven rotation caused by damaged gearing
• Restores proper alignment and load transfer within the crossbar assembly

• One left crossbar pinion gear

• Disconnect power (and gas if applicable) before starting any repair
• Inspect mating gears and crossbar for additional wear; replace if damaged
• Minimal mechanical experience required; keep track of fasteners and orientation during disassembly

This crossbar pinion gear clip secures the crossbar to the pinion gear so the gear assembly rotates together, restoring reliable mechanical engagement and preventing slippage or dropped gears during operation. What it does:

• Retains the crossbar on the pinion gear so the drive and driven components move together
• Prevents gear separation that can cause noisy, grinding, or irregular movement
• Helps stop intermittent operation or failure of the driven mechanism caused by a loose crossbar
• Designed to work with the OEM gear assembly geometry for a secure fit

• Basic hand tools typically required; access the gear assembly per your model's service instructions
• Disconnect power (and water, if applicable) before attempting repairs
• Inspect mating gear and crossbar for wear; replace any damaged components to ensure proper function

This upper freezer basket with an integrated divider restores organized storage in the freezer compartment. The white molded basket keeps frozen items contained and the divider helps separate foods for easier access and stacking. What it does:

• Provides a dedicated upper-bin storage area to keep frozen foods organized
• Built-in divider separates items to prevent shifting and improve visibility
• Replaces cracked, broken or missing upper freezer baskets that allow items to fall through
• Molded plastic construction resists moisture and is easy to clean

• Remove food from the freezer area and power down the appliance
• Lift out the old basket, align the replacement basket in the upper compartment, and seat it into the same supports or rails
• Do not force the basket; ensure proper alignment to avoid damaging mounting features
• Clean with mild detergent; avoid abrasive cleaners or high-heat cleaning methods

This upper freezer basket roller replaces a worn or broken wheel that lets the freezer basket slide smoothly. Restores proper basket support and helps stop sticking, scraping, or noisy movement inside the freezer. What it does:

• Replaces the plastic wheel that supports and guides the upper freezer basket along its track
• Restores smooth in-and-out motion and corrects baskets that catch or bind
• Stops rattling or grinding caused by cracked, worn, or missing rollers
• Helps maintain proper basket alignment and load support

• One white upper freezer basket roller

• Disconnect power to the appliance before beginning any service
• Remove the freezer basket to access the roller; store removed items safely
• Most rollers snap or slide into a housing—inspect clips and track for damage and replace both if needed

This left-side upper freezer basket glide guides and supports the freezer basket so it slides smoothly and stays aligned. Replaces a worn, cracked or broken glide to restore proper basket movement and reduce jamming. What it does:

• Guides the upper freezer basket along its track for smooth in-and-out motion
• Supports basket weight to prevent sagging or misalignment
• Helps stop sticking, scraping or noisy operation caused by damaged glides
• Works as the left-side support piece in the upper freezer basket assembly

• Turn off and unplug the appliance or disconnect power before beginning repairs.
• Remove the freezer basket and any stops or clips to access the glide; reinstall in the same orientation.
• Use basic hand tools; do not force parts—if it does not seat properly, check for broken clips or obstructions.

This replacement freezer upper basket glide (right) supports and guides the upper freezer basket so it slides smoothly and stays aligned. Restores proper basket movement and prevents scraping or binding during normal use. What it does:

• Guides the upper freezer basket along its track for smooth in-and-out motion
• Holds the basket securely to prevent sagging or tipping when loaded
• Commonly replaces worn, cracked or broken glides that cause sticking or misalignment
• Helps stop scraping noises and uneven basket travel

• Designed for slot-in installation on the right side of the upper freezer basket; verify orientation before installing
• Remove food and disconnect power before working in the freezer to avoid injury
• Use basic hand tools; do not force components—inspect mating track for damage
• If the basket or track is damaged, replace those parts as needed for reliable operation

The Lower Basket Slide and Bracket is an OEM part for GE freezers. It is designed to provide smooth and easy movement of the lower basket, allowing for convenient access and organization of your frozen items.

A bad lower basket slide and bracket can occur due to factors such as wear and tear, damage, or misalignment. If you notice symptoms such as difficulty in sliding the basket, a loose or broken bracket, or an unstable lower basket, it may indicate a faulty or malfunctioning lower basket slide and bracket.

Symptoms of a bad lower basket slide and bracket include:

• Difficulty in sliding the basket
• Loose or broken bracket
• Unstable lower basket

Restore your freezer by replacing the faulty lower basket slide and bracket with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This left slide holder is a molded shelf support that secures and guides a refrigerator shelf or drawer slide so the shelf glides smoothly and stays aligned. Replaces a worn or broken left-side slide assembly to restore proper shelf movement. What it does:

• Supports the left side of a refrigerator shelf or glide assembly so the shelf stays level and moves smoothly.
• Replaces cracked, broken, or missing slide hardware that can cause shelves to tip or bind.
• Helps stop shelf sagging, uneven sliding, or a shelf that won't fully extend or retract.
• Matches OEM fit and mounting points for a direct replacement when the left-side holder is damaged.

• One left slide holder (single piece) as shown

• Remove food and shelves from the area before replacing; wear gloves to avoid sharp edges.
• Often snaps or screws into place—inspect existing fasteners and reuse if undamaged.
• Align the holder with the shelf glide before seating; do not force or bend mounting tabs.

The Lower Basket Slide and Bracket is an OEM part for GE freezers. It is designed to provide smooth and easy movement of the lower basket, allowing for convenient access and organization of your frozen items.

A bad lower basket slide and bracket can occur due to factors such as wear and tear, damage, or misalignment. If you notice symptoms such as difficulty in sliding the basket, a loose or broken bracket, or an unstable lower basket, it may indicate a faulty or malfunctioning lower basket slide and bracket.

Symptoms of a bad lower basket slide and bracket include:

• Difficulty in sliding the basket
• Loose or broken bracket
• Unstable lower basket

Restore your freezer by replacing the faulty lower basket slide and bracket with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This is a replacement 8-18 x 1/2" flat-head slotted screw commonly used to secure appliance panels and components. It restores proper fastening and helps eliminate rattles, loose trim, or misaligned parts. What it does:

• Secures panels, brackets, and trim to restore proper fit
• Stops vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to prevent parts from shifting
• Works where a flat-head, slotted-drive #8 screw with 1/2" length is required

• One 8-18 x 1/2" flat-head slotted screw

• Use the correct size slotted screwdriver to avoid cam-out or head damage
• Tighten until snug; avoid over-torquing which can strip threads or deform panels
• Replace any stripped mating hardware for secure fastening
• Disconnect power before doing repairs on appliances where required for safety

This is a replacement round-head screw sized 10-24 x 5/8 in. It secures trim, panels, and internal components so parts stay aligned and appliances run quietly and safely. What it does

• Fastens panels, brackets, and trim pieces in place
• Prevents loose parts that can rattle or cause misalignment
• Replaces missing or stripped screws to restore secure mounting
• Works where a 10-24 x 5/8 round-head screw is required

• Disconnect power before servicing the appliance
• Use the proper screwdriver or nut driver to avoid stripping the head
• Align parts before tightening and thread gently to avoid cross-threading
• Do not over-tighten; stop when snug to prevent panel distortion

Size: 8 - 18 ab.