Parts for Jenn-Air JFFCC72EFS02: Dispenser Front Parts

The Whirlpool EveryDrop Ice and Water Refrigerator Filter 2 is an OEM replacement part for Whirlpool refrigerators. This advanced water filter is designed to provide superior filtration for both the ice maker and water dispenser. This water filter effectively reduces numerous contaminants, including lead, pesticides, and pharmaceuticals, ensuring that your drinking water and ice are not only clean but also taste great.  

Regular replacement of the EveryDrop Filter is recommended to maintain optimal performance and water quality. Over time, filters can become clogged with particles and contaminants, leading to reduced water flow and a decline in the effectiveness of filtration.

Symptoms of a filter that needs to be replaced include:

• Noticeable decrease in water flow rate from the dispenser
• Unpleasant taste or odor in the water and ice
• The filter indicator light on the refrigerator turns on

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The FreshFlow Refrigerator Air Filter is an OEM component for Whirlpool and Maytag refrigerators. Located inside the ventilation system, this filter purifies circulated air. This air filter is 3" wide by 2" high and white in color. It should be replaced every 6 months to ensure the best performance.

Causes of failure relate to clogging from trapped dust, dander and other allergens despite regular replacement intervals. Performance decreases as filter media becomes saturated over months of use.  

Symptoms of a dirty or blocked refrigerator air filter include:

• Reduced airflow causes higher compressor runtime hours  
• Odors being pulled into the fridge from unfiltered vents  
• Shortening of food storage life due to unpurified air exposure
• Reduced fan speeds or strange noises originating from the vents

This genuine Whirlpool filter is also compatible with Maytag, Jenn-Air, and Amana models as well.

This user interface and control board kit replaces the console controls and electronic board that let you select and run oven or range functions. Restores responsive buttons and clear display so the appliance accepts commands and operates correctly. What it does:

• Replaces the front control/UI assembly and main control board that process user input
• Restores button, touchpad or display response when controls are unresponsive or intermittent
• Can resolve error codes or failure to start when caused by a faulty console or board
• Helps fix visible display issues, missing segments, or incorrect readouts

• Disconnect power at the breaker before servicing to avoid shock or damage
• Handle circuit boards by the edges and avoid static discharge; use a grounding strap if available
• Follow OEM service manual for disassembly steps and connector orientation when replacing the assembly

This replacement ice door fits the refrigerator ice dispenser and restores a secure seal at the dispenser chute, helping prevent ice spills, warm air infiltration, and unwanted melting. Designed to snap into the dispenser opening for a clean fit. What it does:

• Seals the ice chute to keep freezer air in and room air out, reducing frost and melting.
• Guides ice through the dispenser when activated and helps stop ice flow when idle.
• Replaces cracked or broken dispenser doors that cause ice jams, leaks, or continuous dripping.
• Helps reduce stray ice and improves dispenser performance when the original door is damaged.

• Disconnect power to the refrigerator before servicing to avoid injury.
• Typically installs by removing the dispenser door or inner chute panel and snapping the new door into place; do not force broken tabs.
• Inspect mounting tabs and surrounding plastic for damage; replace any additional broken components as needed.
• Operate the dispenser a few times after installation to ensure proper alignment and function.

The Switch is an OEM replacement part for Whirlpool refrigerators. It is designed to control the water dispensing function of your refrigerator, providing a convenient and easy way to access filtered water. It is responsible for activating the water flow when pressed, allowing you to dispense water into your glass or container.

A bad refrigerator water dispenser switch can occur due to wear and tear, physical damage, or electrical malfunction. If you notice symptoms such as the switch not responding when pressed, inconsistent water flow, or a complete lack of water dispensing, it may be time to replace the switch.

Symptoms of a bad refrigerator water dispenser switch include:

• Switch not responding when pressed
• Inconsistent water flow
• Lack of water dispensing

Restore your refrigerator's water dispenser by replacing the faulty or damaged water dispenser switch with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

A replacement tension/return spring that restores proper tension and return action to the appliance component it supports. Helps stop sagging, reduce noise, and return moving parts to their intended position for reliable operation. What it does

• Provides tension and controlled return for a door, latch, lever or similar moving part.
• Restores correct alignment and helps parts stay closed or in their resting position.
• Reduces rattling, popping or grinding noises caused by a weakened or broken spring.
• Common symptom: parts that sag, fail to stay closed, or don't return smoothly after use.

• Disconnect power (and gas/water if applicable) before starting any repair.
• Use proper hand protection and avoid overstretching the spring during installation.
• Inspect surrounding components (clips, brackets, hinge points) and replace any worn pieces.
• Follow OEM instructions for safe removal and correct routing/attachment.

This ice door seals and covers the refrigerator ice chute so ice dispenses cleanly and cold air stays inside the freezer compartment. Replacing a damaged door restores proper ice delivery and helps prevent melts and freezer-to-fridge airflow. What it does:

• Opens and closes to allow ice to pass through the dispenser chute
• Seals the ice chute to reduce warm air entering the freezer and limit melting
• Helps prevent ice jams and spillage at the dispenser opening
• Stops light or drafts from entering the ice storage area when closed

• One ice door

• Disconnect power to the refrigerator before servicing to avoid injury
• Remove the dispenser housing or inner door assembly per your model's service instructions
• Handle plastic parts carefully to avoid cracking; replace any broken fasteners

This bracket is a replacement mounting support designed to secure internal components and assemblies in place, restoring proper alignment and stability for the appliance. It's a direct-fit replacement when the original bracket is damaged or missing. What it does:

• Provides a secure mounting point for internal panels, housings, or components
• Restores alignment and reduces vibration or movement of attached parts
• Helps prevent wear or damage caused by loose or misaligned components
• Common symptom: rattling, shifting parts, or loose paneling near the bracket area

• One bracket

• Remove power supply (unplug appliance or switch off breaker) before beginning work
• Use appropriate hand tools; avoid over-tightening fasteners which can deform the bracket
• Replace only the damaged bracket; orientation matches the original before final fastening

This replacement door gasket seals the appliance door to help prevent water or air leaks and maintain proper temperature and performance. It restores a tight seal to reduce leaks, drafts, and energy loss. What it does:

• Creates a watertight/airtight seal around the appliance door to prevent leaks and maintain temperature
• Helps stop drafts, odors, and moisture from escaping or entering the cabinet
• Common symptom: visible tears, rips, or a flattened seal at the door edge
• Common symptom: water pooling around the door or difficulty maintaining set temperature

• One replacement door gasket

• Disconnect power and water before starting any repair
• Remove the old gasket carefully to avoid damaging the door flange; align and seat the new gasket fully in the channel
• Some installations may require retaining screws, clips, or light adhesive—use only manufacturer-recommended fasteners if specified

The Ice Door is an OEM part for Whirlpool refrigerators. It is responsible for sealing and dispensing ice from the ice maker compartment. It allows for smooth and controlled release of ice cubes or crushed ice through the dispenser chute, providing you with convenient access to refreshing ice whenever you need it.

A bad ice door assembly can occur due to wear and tear, damage, or malfunctioning components. If you notice symptoms such as ice clumping together, ice melting or leaking from the dispenser area, or the dispenser not closing properly, it may be time to replace the ice door assembly.

Symptoms of a bad ice door assembly include:

• Ice clumping or sticking together
• Ice melting or leaking from the dispenser area
• Dispenser not closing or sealing properly

Repair your refrigerator's ice dispenser by replacing the faulty or damaged ice door assembly with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This refrigerator door gasket creates an airtight seal around the fresh-food door to help maintain proper cooling and reduce energy waste. Replace a torn, compressed, or leaking gasket to restore a snug door seal and consistent temperatures. What it does:

• Seals the fresh-food compartment door to keep cold air in and warm air out
• Helps prevent frost buildup and moisture inside the refrigerator
• Reduces strain on the compressor caused by air leaks
• Addresses symptoms like visible gaps at the door, cold air loss, excess frost, or higher energy use

• Disconnect power to the refrigerator before beginning work
• Clean the door flange and remove any old adhesive or residue before installing
• Press the gasket firmly into the channel, starting at the corners and working around the door for an even fit
• After installation, allow the gasket to form and check for a continuous magnetic seal

This heater is the dryer heating element assembly that provides the heat needed for normal drying cycles, restoring effective drying performance when the element has failed. Installs in the dryer's heater housing to warm incoming air. What it does:

• Heats air that passes through the dryer drum to dry clothes
• Common repair for dryers that produce no heat or take much longer to dry
• Can help resolve intermittent heating or weak heat symptoms when element breaks or shorts
• Works as the primary replaceable heating component in the dryer's heater housing

• Disconnect the appliance from power before starting any repair.
• Replacement requires access to the dryer's rear or front panel and basic hand tools; follow OEM service instructions.
• Inspect related components (thermostats, fuses, wiring, venting) for damage or failures while replacing the heater.