Parts for Whirlpool CET9000GQ0: Dispenser Parts

The Valve is an OEM part for Whirlpool washing machines. This water inlet valve controls the flow of water into the washing machine, ensuring the proper amount of water is used for each wash cycle. It plays a crucial role in the washing process by regulating the water intake from your home's plumbing.

Over time, the valve can wear out or become clogged with sediment and mineral deposits, leading to issues with water flow. Electrical malfunctions or mechanical failures can also impair the valve's functionality.

Symptoms of a bad valve include:

• The washing machine not filling with water
• Slow filling or no water flow
• Leaking water when the machine is off
• Error codes related to water supply issues
• Unusual noises during the water filling cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Valve is an OEM replacement part for Whirlpool washing machines. This valve is responsible for controlling the flow of water into the washing machine during various cycles and operations.

Causes of a bad valve can include mineral or sediment buildup restricting water flow, worn seals or diaphragms allowing leaks, or mechanical failure of internal components.

Symptoms of a bad valve include:

• Inability to fill or drain the washing machine properly
• Excessive water usage or leaks
• Abnormal sounds during filling or draining cycles
• Incomplete or ineffective wash cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw secures panels and internal components in your appliance. It restores a tight, reliable hold when the original fastener is missing, stripped, or corroded—helping keep assemblies aligned and reducing vibration or rattling.

• Fastens panels, brackets, and components to the cabinet or frame
• Helps maintain alignment and reduce rattling or buzzing noises
• Replaces damaged, rusted, or missing fasteners
• Typical signs: loose covers/panels, gaps or misalignment, vibration during operation

• Disconnect power before servicing; wear work gloves
• Match thread and length to your model's parts diagram before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• If replacing multiple screws, swap one at a time to maintain alignment

This nozzle directs and focuses water flow inside the dishwasher so dishes get a thorough rinse. Replaces a worn, cracked, or clogged nozzle to restore spray coverage and help prevent poor cleaning performance. What it does

• Channels water from the spray arm or manifold to create a targeted spray pattern
• Helps maintain even water distribution across racks for better cleaning
• Clogs, cracks, or damage can cause weak spray or spotty wash results
• Compatible with systems that use a snap- or press-fit nozzle on the spray assembly

• Disconnect power and water supply before starting any repair
• Remove the spray arm or access panel as needed to reach the nozzle
• Inspect mating surfaces for debris; press or snap the new nozzle into place until seated

This drain hose carries used water from the appliance to the household drain. A secure, leak-free drain path helps prevent water from backing up or leaking during and after a cycle.

• Routes wastewater from the unit to the standpipe or sink drain
• Helps resolve issues like slow or incomplete draining
• Can address leaks found around the rear or drain area
• Restores proper water exit flow after hose damage or kinks

• Unplug power and shut off water before servicing
• Have a towel or shallow pan ready to catch residual water
• Note hose routing and connections before removal; transfer any clamps if reused
• Ensure tight, watertight connections and proper routing without kinks

The Dispenser Drawer Assembly is an OEM part for Whirlpool front-loading washing machines. The drawer houses mechanisms that deposit detergent and fabric softener into the drum at the proper times in the wash cycle. 

Causes of a bad dispenser drawer can include wear and tear to runners, rollers, or linkage connecting it to the washer cabinet over repeated use. Mineral or chemical deposits may also jam drawer movement.

Symptoms of a bad dispenser drawer include: 

• Failure to fully retract or extend from the cabinet
• Difficulty latching or staying securely closed  
• Contents not fully dispensing into the drum
• Inconsistent or improper distribution of detergent

This OEM Whirlpool replacement drawer assembly is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore front-loading washing machines. 

Restore the clean look and proper function of your washer's detergent compartment with this detergent dispenser drawer cover. It replaces a cracked or missing cover so the drawer closes correctly and helps reduce splashing at the dispenser. What it does:

• Covers and protects the front of the detergent dispenser drawer
• Helps the drawer align and close properly for consistent dispensing
• Replaces broken or missing cover tabs that prevent the drawer from staying in place
• Common symptoms: cracked/missing cover, broken tabs, drawer won't close or feels loose, splashing/leaks at the dispenser area

• 1 detergent dispenser drawer cover

• Unplug the appliance and shut off water supply before servicing
• Pull the dispenser drawer out and depress the release tab to remove it
• Release the locking tabs to remove the old cover; snap the new cover fully into place
• Reinstall the drawer and run a quick test to check operation

This replacement commercial door restores a secure, smooth-closing entry to your appliance. Use it to replace a cracked, bent, or damaged door to maintain proper closure, alignment, and appearance so the unit functions as intended.

• Functions as the appliance's front door, providing access for loading/unloading
• Interfaces with hinges and latch/strike for smooth operation and secure closure
• Presents the proper contact surface for the seal or interlock area, where applicable
• Typical symptoms: door cracked, warped, or loose; won't close or latch; misaligned or rubbing

• Disconnect power; if the unit connects to gas or water, shut those off before service
• Support the door while removing hinge and latch/strike fasteners to avoid cabinet damage
• Transfer any reusable hardware, trim, or nameplates from the old door to the new one
• After installation, verify alignment and latch engagement; adjust hinges/strike for an even seal

This clamp secures flexible hoses and small-diameter tubing to fittings, helping prevent leaks and maintain proper fluid flow in appliance systems. It's a simple replacement that restores a tight, reliable connection. What it does

• Holds a hose or tube firmly on a barb or nipple to stop leaks and loss of pressure
• Keeps water, drain, or vent hoses seated during normal appliance operation
• Replaces worn, corroded, or loose clamps that cause dripping or poor connections
• Works where a small, durable clamp is required for routing or securing tubing

• One hose clamp

• Inspect hose and fitting for damage; replace hose if cracked or hardened before installing the clamp
• Tighten clamp until snug—do not overtighten; ensure even compression around the hose
• Disconnect power and water as appropriate and take safety precautions before working on the appliance

The Dispenser Hose is an OEM replacement part for Whirlpool washing machines. This hose is integral in the detergent dispensing system, channeling liquid detergent and other washing agents from the dispenser to the wash drum. It ensures that cleaning agents are efficiently delivered to the laundry load at the appropriate time during the wash cycle.

Symptoms of a bad Dispenser Hose include:

• Leakage of detergent or water from the dispenser
• Detergent not being dispensed into the wash drum
• Residual detergent left in the dispenser after the wash cycle
• Unusual sounds, like gurgling or splashing, during detergent dispensing

Causes for a malfunctioning Dispenser Hose can include blockages from accumulated detergent residue, cracks or holes in the hose, or issues with the connectors that attach it to the dispenser and drum.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement handle restores a secure, comfortable grip for opening and closing your appliance. Swap a loose, cracked, or missing handle to improve safety, day-to-day usability, and the overall appearance of your unit.

• Provides the grip point to open and close the door or drawer
• Mounts to existing attachment points for a stable, aligned hold
• Helps resolve issues such as a wobbly, cracked, or broken handle
• Restores smooth, confident operation when pulling the door

• Disconnect power to the appliance before starting any repair
• Support the door/drawer and remove the interior fasteners holding the old handle
• Transfer any trim/end caps if present; position the new handle and start screws by hand
• Tighten fasteners evenly without overtightening; test operation

This control panel overlay replaces the front-facing console cover to restore button labels and the appliance's finished appearance. It provides a clean, readable surface so controls are easy to identify and use. What it does:

• Covers and protects the appliance control panel from spills, dirt, and wear
• Restores printed labels and button legends that have faded or worn off
• Helps ensure buttons and touch controls register correctly by providing the intended interface surface
• Useful when the original overlay is cracked, peeling, or cosmetically damaged

• One control panel overlay

• Disconnect power to the appliance before beginning any work
• Remove console trim or fasteners to access the old overlay; handle clips gently to avoid breakage
• Align the new overlay carefully before fastening; verify button access and proper seating
• If adhesive is present, remove old adhesive residue and follow OEM guidance for any recommended adhesive or tape