Joel C Brooklyn , NY July 17, 2014 E12 control board problems oven did not function Replace control board. Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes
Kent K Washington , PA May 27, 2023 F11 error code. Replaced control board/clock and overlay. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Jerry B Sunfield , MI May 17, 2021 Appliance: Model LGGF3043KFR, FIDGEAIRE OVEN Oven clock stopped working Moved oven out in the open, removed top rear panel covering the oven clock and controls. 4 screws held it in. Took it out, unplugged electrical connection, plugged in new part, installed it, put rear panel back on and plugged it back in. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers, Socket Set
Daniel G Sunman , IN March 22, 2016 Appliance: Model LGG3043KFSF When we tried to use the oven we got f31 code The temp sensor tested ok, so that left the control board. I ordered one at about 3 pm on thur and received it at 930 am the next morning. I took about 15 min to install, problem solved. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers
Jonathan C Rogers , AR December 16, 2025 Clock screen and board stopped working We ordered a replacement from APP. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Sharon R Clarksburg , WV March 29, 2025 Power surge burned up clock So easy; removed back cover and then removed the 4 screws holding the clock in, unplugged the connecting wire then just put the new one on, plugged it in and done . Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Adjustable Wrench, Screwdrivers
Ron C Frankfort , NY August 11, 2023 Had a lightning strike at my house, the only thing that was effective was the stove. It was very easy fix, removing the panel in back unplugged the Clock/Control replaced the Clock/Control and plugged it back in. Put the panel back on plugged the stove in and it worked. Very happy !!!!!!!! Thanks for your support. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers, Socket Set
Jane S Toms River , NJ May 01, 2022 Only partial numbers showed on the clock. If I pressed the light button it didn't work. Ordered the parts from you. My husband and son-in-law put them in. My son-in-law has ordered from you before. He said this was much easier than the repair on his dishwasher. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers
Gayle B Eastover , SC September 19, 2021 Appliance: Model FRIGIDAIRE GAS RANGE LGGF3043KFR Lightening knocked out my range and I was getting a f30 code. I knew it was the control board as I couldn’t use the oven. Unplugged range and removed the upper back panel. Unplugged the control board and removed the screws. I carefully removed the overlay from the front of the board as it is reusable. Put the overlay on the new board, screwed it back in place, plugged it in, and replaced the back cover. Took maybe 15 minutes. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers, Socket Set
Patrick E Sulphur , OK April 12, 2021 Appliance: Frigidaire Gas Range LGGF3043KFC Control panel/clock f10 and f30 codes the oven would light but wouldn’t fully heat up before throwing f30 code if just left plugged in would throw f10 code Called service company to diagnose and get estimate. Technician said it would cost over $500 to repair. Told me the control panel was bad. I found the part here ordered it and installed in less than 15 minutes I have a working oven and stove. Total cost $225 including the service call. New stove to replace would have cost over $1500. Thank you appliance parts pros. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers