How to Troubleshoot & Replace Ge AP2059405 / WR2X7491 Riser Cam Shim

I emptied door shelves and used plastic sheet to close off refrigerator. The repair was done with refrigerator running. I removed door and changed riser cam and shim. Then replaced door. It took maybe 45 minutes from start to finish. If I did the job again it would be completed in 30 minutes or less. The videos are informative. Thank You 

I have to replace the broken parts mentioned above and I replaced by installing the 3 parts above. I followed the youtube video that was shown with one of your parts on the web site. However, to an inexperience person like myself, I need someone to hold the door steady while I was working to remove and replace the parts above. It is simple enough for anyone to figure out what to do. just take pictures prior to the removal of any parts so it simplifies the installation of the replacement parts. 

I ordered the parts, they were shipped the same day, took 2 days to get to me. I then followed the installation shown in the video without any problems. Each hinge took about 20 minutes after having all of the tools assembled. Only slight change from the video is that I had a second person steady the doors as they tried to slip off of my supports while remove and installing the fasteners. The screws them selves had over an inch of threads so it took a while to get them removed, not difficult, just time consuming. 

Replaced lower door hinge and cam riser. 

The video on your website was very helpful in diagnosing the problem and walking through the parts replacement, and the parts ordered from your site were a perfect match. Thanks so much! 

The door had a broken cam so it was not closing because it was misaligned. I searched for parts at "AppliancePartsPros.com" and found the correct parts and ordered them. The video on their site was very helpful and I replaced the cam and shim without having to remove the door. I have ordered parts from them before and have been very pleased with their services and parts availability. 

Found ApplianceParts Pros on the web, entered the part number, order the part(cam riser) and within a few days, the part arrived! Was really impressed with the delivery time! installed the part after watching the instructional video had the door working in less than thirty minutes. Thanks 

Replaced broken cam riser. Ordered new part (plus suggested "shim" and "door stop"). While I did not need anything but the cam riser, appreciate the suggestion of potential additional parts needed. Had to request assistance as the old cam riser was secured with a pop rivet versus a screw. Building engineer drilled out the pop rivet and replaced with a screw and bolt successfully. 

Changed out lower door hinge with cam riser. 

Replaced door cams and shims. Site showing other parts purchased by others along with the part at which I was looking, was very helpful. Very quick delivery of parts.