Watched video on how to install the new drain pump. It seemed quite simple and to my surprise it was!!! I turned off the breaker, removed the kick-plate on the dishwasher, turned off the water supply, disconnected water supply and hose going to garbage disposal. Removed the mounting screws on the sides of the dishwasher. Pulled the DW out from the counter top and turned it on side. The pump was basically 2 clamps, 2 rubber brackets and a plastic plug for electric. I removed all on the old and installed the new one. Reassembled everything removed or turned off and put the DW back in the counter. Ran a short cycle to check for any leaks. The DW is as good as new!!!!