Frederick S Trumansburg , NY June 12, 2016 Top burner stopped working Just replaced element Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers
John P Pelham , MA May 03, 2016 Appliance: Model WHIRLPOOL GLASS TOP RANGE Burner in electric range burned out Easy, install took less than 10 minutes, all parts were included. Great place to get repair parts, thanks! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Don M Cocoa Beach , FL December 20, 2015 Appliance: Model ART 3110 Broken cooktop and element Bought used cooktop and then ordered elements freappliance pros. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
James R Berthoud , CO December 12, 2015 Ront burner was not working Ordered new burner, took about 7 minutes to replace the old one....works great now.... Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Carroll F Nebo , NC October 18, 2015 Coil not working burnt out Ordered part from you all and put it on, no problem at all. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Nanette D Saint Cloud , FL September 01, 2015 Appliance: Whirlpool Electric Range GY396LXGQ4 Two elements burned out of my whirlpool ceramic top stove Removed the warmer drawer. Unplugged the stove from the wall outlet. Pulled the stove out of the counter space.Removed the top with the help of my husband. Several screws to remove and several different layers. of frame. Remove the metal braces and unplugged the wires one at a time and plugged them into the new elements to prevent mixing up the spots. Slipped each element back into the spot that holds it in place. Put the metal braces back. Tested the elements. They worked perfectly. Replaced all the screws and it was done. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Pliers, Screwdrivers
Nikolai B San Jose , CA July 25, 2015 Radiant surface element burnt out Replaced the element Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers
William E Port Richey , FL June 29, 2015 Appliance: Estate Free Standing Electric Range TES356RD2 Burner not heating Turned off power removed glass top 2 screws and unplug wires and lay upside down on counter. Then remove screws o bracket and unplug element replace element, bracket and screws reinstall top and turn on power Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
James L Montville , NJ January 09, 2015 Appliance: KitchenAid Slide-In Range, Electric KESH307HBS5 The lady dropped grease down heat vent from oven grease steamed up to hot plate then dropped on element burn out result Remove the front three screws under control panel and the two side longer chrome screws from the sides. Tilt-lift control panel up and away from glass surface then unscrew five screws holding down the front of top plate assy. Tilt & free top plate from the rear clip-holds next grab a 6-8" piece of wood to prop-up top plate. Locate burnt element and remove wire brace, then using small pliers to remove blade terminals. Clean the grease off the hot-plate before installing new element. Good luck it's a piece of cake. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Pliers, Screwdrivers
Larry J Shiloh , IL December 16, 2014 Small burner didn't work Replacement was quick and easy. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers