Replaced the evaporator fan assembly inside the refrigerator. The evaporator fan is located in the inside rear of the refrigerator behind the bottom drawers. You must remove the crisper drawers and bottom drawer center support to gain access to the rear evap plastic cover. The cover can be difficult to remove as it snaps onto upper vent assembly that houses the air duct and filter. Remove two 1/4 in. screws on the cover and gently pull towards you to un snap. Now you can access the evap fan assembly. The fan is mounted to the duct with a rubber mount. Pull the corners with a needle nose pliers to remove the fan asm. The fan assembly comes with the wire harness and thermistor and temp sensor. Install in reverse order.