Scott T Efland , NC November 28, 2015 Broken lid switch on whirlpool washer After removing the four bolt holding down the top, I removed the old switch and installed the new one in its place. I discovered that the plug on the new part did not match the old part so I spliced the old plug to the new switch leads since it was perfectly good. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers, Socket Set
Ruben F Spring , TX November 18, 2015 Washer was cut in off and on I replace the lid switch now it works good and wife is happy. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Joseph D Nottingham , MD September 21, 2015 Water will not drain By replacing the lid switch assembly. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Michael B Highlands Ranch , CO August 25, 2015 Appliance: Whirlpool Washer LSR7233DQ0 Kenmore washing machine lid switch was broken I replaced the lid switch. The online Repair Video made the repair VERY easy. Every step was clearly shown and identified. Thank you! Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Linda J Amissville , VA July 07, 2015 Appliance: Model 110.92284800 My kenmore washer would not dump the water after the wash cycle no matter which setting we used We replaced the lid switch in the door after we saw a tutorial on UTube. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Walter S Athol , MA June 28, 2015 Washer would not run spin cycle Replaced lid switch. The repair video was very helpful in demonstrating how to replace the part. The washer is over 20 yrs old. It took more time to clean the inside of the washer than replace the part. Part replacement took about 10 minutes. This is the second repair on this washer using appliancepartspros.com parts. Prior to this repair the agitator had stopped working. The repair video explained how to replace the agitator dogs making the repair very easy. Walt...MA Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Glenn M Mountain View , CA June 06, 2015 Appliance: KitchenAid Washer KAWE565BWH1 Washing machine top aggitator didn't turn I located the parts in question using the Appliance Parts Pro website and then watched the video showing how to do the repair. This made is easy to do the repair. The website is a life saver and it is so easy to use. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Adjustable Wrench, Screwdrivers, Socket Set
Barry B Tucson , AZ May 04, 2015 Washing machine lid switch After watching your online video, fixing it was relatively easy. One screw was rusted in place and I had to drill it out. Other than that, the fix was exactly as shown in the video. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers, Socket Set
Betty P Wellsville , NY March 30, 2015 Lid switch DIY Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Tom C Aberdeen , WA March 29, 2015 Lid switch broken due to slamming the door to many times I got a replacement switch witch came with the wrong plug on it that I didn't notice until I went to plug it in. So I took the old plug and put in place of new one sealed it all up good and we are up and running Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers