Kenneth Z Folsom , LA July 28, 2017 Broken drawer rail. Ordered rail, roller & screw roller from appliance parts pro. Went to the work and when I came back parts were waiting. No seriously, it wasn't that fast but they arrived super fast like 3 days. The rail slides back so I just tapped it gently to remove it. There's a tiny locking tab that it helps to push in. Assembled the roller and screw roller on the slide. This was the hardest part. The screw hole is NOT pre threaded and the screw roller has a very shallow channel for the Philips screw driver. I had to use a special Philips screwdriver to start the screw roller into the hole and then had to use a small flat head to finish up. You can just feel that the screw wants to go in crooked and crack the brand new rail. It should be pre threaded. After installing the screw & roller, the slide is very easy to reinstall. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Gary B Mount Vernon , IN November 19, 2016 Appliance: Jenn-Air Refrigerator JTB2188AEA The ice maker no longer worked properly and the stops on the rails on the meat and cheese drawer broke which allowed the drawer to be pulled all the way out without stopping I ordered original replacement parts from Appliance Parts Pro to fix the issues. I received the parts very quickly and the parts were packaged well. The repairs were easy and quick. Great experience, will use again if need replacement parts. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Darwin I Marshall , MI November 15, 2016 Appliance: Model MODEL # WAS ON PURCHASE E-MAIL Broken shelf support Bought new support Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Philip W Greenfield , WI February 17, 2016 Broken drawer slides so meat drawer would fall out of track Replaced both tracks and rollers. Works like new and as advertised. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Vito D Peabody , MA October 03, 2015 The rail cracked and needed to be replaced Very simple fix. A screwdriver was all that was needed to replace the wheel. Slid the new one in and fits perfectly. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Bruce W Princeton , NJ July 26, 2015 Appliance: Maytag Refrigerator MTB2156AEW Maytag refrig left rail on meat/cheese shelf broken Bought new rail and installed it Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Robert G Branford , CT June 27, 2015 Appliance: Model MTB2154GE Broken left rail for sliding meat drawer Note: I had done a similar repair several years ago on the right rail which is more expensive and diffiecult because of the moisture control. Removed the drawer and shelf. Used a putty knife and hammer (gentle tap) to release the old rail from the shelf after several minutes struggling to otherwise pop it out. Transferred the roller from the old rail to the new rail. Installed the new rail on the shelf. Replaced shelf and drawer. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Gary D Saugerties , NY May 03, 2015 Broken meat tray track Ordered new part Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Michael R Rock Hill , SC April 18, 2015 Refrigerator drawer rail broke Ordered part and installed it. Very easy. 5 minutes. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers