Eric B Chapel Hill , TN December 28, 2024 My washer wasn’t filling up with water Appliance Parts Pros helped me diagnose the problem and order the correct part! It was easy to replace. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Michael H Zephyrhills , FL December 13, 2024 Bad water inlet valve Was very easy and fast Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Harrison L Moncks Corner , SC December 01, 2024 Failed water inlet valve Replaced the water inlet valve. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Aidan D Milan , MI November 15, 2024 Leak from valve into tub Disconnect water lines and replace valve Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Doug K Eau Claire , MI October 21, 2024 Appliance: Model MVWP575GWD The hot water would barely flow Replaced the water valve! I had to use the harness off of the old valve because the plug was incorrect where it plugged into the circuit board. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Kari B Greenville , SC October 09, 2024 Appliance: Model WHIRLPOOL TOPLOAD WASHER MOD WTW4816FW2 Water intake valve was screaming every time the washer filled Replaced water intake valve Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Pliers, Screwdrivers
Dallas M Mountain Home , AR April 13, 2024 No hot water going in appliance but was supplied with hot water I replaced the part that I ordered and had hot water for washing again Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
William S Marion , AR March 01, 2024 Washer was screaming when sensing to fill with water. Replaced the water inlet valve. Now it's as quiet as the day I bought it. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Randy N Locke , NY February 23, 2024 Leaking water into the tub even when the machine is shut off . Ordered the water inlet valve and it came within 2 days even over the president's holiday. It was an exact part match . We used the video instructions to replace, clear explanations and easy replacements. About 30 minutes total. Started the washer back up and no leaks but the tub would fill and not shut the water off. A thought may be a bad control panel and have to scrap 7-year-old washer because of panel replacement needed. Then remembered about reading of a calibration sequence reset needed when doing any repair that involved electronic or selenoid switches to sync with the control panel. All good now. Do not forget to recalibrate. Details here: https://www.youtube.com/watch?v=Z1i0rOQXEac&list=RDCMUC1sWwB45heL1CfLHLBXCXow Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers
Darrly A Kosciusko , MS February 03, 2024 Cold water inlet was not letting enough cold water in causing machine not to fill. Replaced water inlet valve. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Pliers