My bravos dryer would not start sometimes, and then finally wouldn't start at all. I took the front panels off after I unplugged it and felt the motor spindle was frozen. The bearings had seized in the motor. So I ordered a new motor and thought I might as well change the drum belt and put new drum roller bearings with the kit 4392067 also a new belt idler pulley that all comes in the kit. There are many videos online about changing the motor it's fairly easy. The most difficult part will be removing the blower wheel from the motor shaft. This is a left hand thread so clockwise will remove it! Do this before you order your parts because sometimes the blower needs to be cut off and you will need to buy a new one. Also this is a good time to remove all lint from the dryer and exhaust lines. Dryers are very sensitive to any air flow blockage and clothes will dry very slowly. Also there's no way to explain how difficult putting the drum belt back on the idler. Some dryers are easy some are hard to reach. You just must be patient. The dryer is up and running again thanks to appliance parts pros, Don't be afraid of this repair you can do it.