Replacing this gasket was simple, the baskets were removed from the dishwasher to make access easier, the old gasket was removed from the tub edge after noting the original positioning, particularly on this style where the bottom fold of the gasket fits into a wire on each side of the door to keep it in proper position. The gasket groove was inspected, and cleaned, and the new gasket was carefully pushed into place, beginning at one end, and inserted all the way around without stretching it at any point. The far end was also inserted into the wire in the bottom of the door. The gasket was gently pressed into the groove with thumb pressure to be sure it was seated all the way around. the door was closed to ensure the gasket was properly fitted, and a short cycle of the washer was run to be sure the new gasket didnt leak. By the way, APP ordering site gave the typical shipping time for standard shipping and the gasket arrived two days after it was shipped, just as the checkout website said. APP price was cheapest around too, and the part was genuine GE. It took longer to find the cheapest priced part on the internet than to install it. Next time APP will be the first place I look