Searched diferent videos online. Found the right model fridge. Pulled fridge from wall cabinet. Unplugged fridge. I had turned off water feed days beforehand. Used nut driver to remove backing plate over the lower lefthand side of the back of fridge. Carefully pressed down on locking ring on each of 4 tubes leading into the old valve. (Take a picture of the valve in position before you remove it!) Remove the last nut holding the valve in place. Disconnect the wire hanesses and swap out the valves. Re-connect the wires and tubes. Plugin the Fridge and turn on the water. Check for leaks! Appliance Parts Pros is my new go to for parts!