The filter on the right side would not fully seat. It was snagging clothes, especially items with straps. When I removed the parts, there was a bunch of lint packed into the bottom of the lint filter cover. I am not sure if you can look down in there and see if yours is packed in. I did not look first. I saw there was a redesign and figured there was a reoccurring problem. Lots of posts were reporting the issue and successful resolution with the redesigned parts. You might try to clean first but you may need to pull the bits apart to get down in there. BTW the new bits are slightly different so they must have been altered to solve a design issue.
Change out only involves a few screws. I did have a very tough time getting the holes to line up and properly reinsert the screws. I used an awl to align the holes. That helped a bunch.
So far so good. Screen seems to seat better. We will see long term if it helps.