It was a very easy fix, about 15 minutes total for both burners. Just pull out the stove, unplug it, remove the panel off of the back of the stove by unscrewing the five screws. Then either with your fingers or a pair of needle nose pliers remove the wires from the back of the regulator, pay attention to the location of the wires. Take a picture if necessary but you can also look at the regulator on the opposite side of the stove if needed. I found it easier to remove the wires while the regulator was still secured to the stove. Next , pull off the knob on the front side of the stove, after the knob has been removed it will expose two screws, unscrew them and the old regulator will come right out the back of the control panel. Replace the old regulator with the new one attach it with the screws from the one you removed and replace the wires to their original positions. Replace the back plug it in and your good for another 100,000 miles