Do-It-Yourself Story

Watched your how to video. Took off door, unscrewed front panel, propped up top panel, removed front panel, wiring harness, boot from drum and replaced all in reverse order . Only real challenge was getting the boot on the drum. It took about 10 min to get the boot on the drum. It came off 4 times while trying to replace the wire spring harness. I finally got someone to hold one end of wire while I pulled the spring and reconnected them. ( this was a bear). I takes some strength to pull that spring. Then I connected the boot to the front panel. My advice is to line up the tabs in the appropriate slots then stretch the rubber in a clockwise manner to get all the tabs to line up. It took me a bit to figure this out.