Parts for Frigidaire FFGW2426UBA: Door / Drawer Parts

This control panel is the front console piece that houses the oven's user interface and provides a clean, finished surface for the console. It restores the appliance's functional control area and appearance. What it does:

• Replaces a damaged or worn front console surface to restore button access and display visibility.
• Secures the control components and provides the mounting surface for switches, buttons, and the display.
• Helps eliminate issues caused by cracked, bent, or cosmetically damaged panels that impede normal operation.
• Useful when the existing panel is chipped, scratched, or no longer aligns correctly with the console assembly.

• Disconnect power (unplug or shut off circuit breaker) before beginning any repair to avoid electrical shock.
• Handle panel and any attached trim or display with care to avoid scratching; use appropriate tools to remove fasteners.
• Follow OEM diagram for correct screw locations and reassembly order; ensure all connectors and clips are seated before restoring power.
• Ground yourself to avoid static damage.

This high-temperature insulation is used in the oven assembly to contain heat and protect nearby components and cabinetry. Replacing damaged insulation helps the appliance maintain set temperatures and keeps exterior surfaces from getting excessively hot. What it does:

• Helps retain heat for stable baking and roasting temperatures
• Reduces heat transfer to the appliance frame and adjacent cabinets
• Replaces insulation that is torn, charred, or saturated with spills/grease

• One insulation piece

• Disconnect power; for gas models, also shut off the gas supply
• Remove the range or wall oven and access the oven body
• Wear gloves, eye protection, long sleeves, and a dust mask; fibers can irritate skin and lungs
• Reinstall in the same orientation/routing as the original; do not compress insulation or block vents

This complete refrigerator door assembly replaces a damaged or bent refrigerator door to restore proper sealing, appearance, and temperature control. Fits models using Frigidaire part number 5304513044. What it does:

• Replaces the full door structure to restore a tight seal and prevent cold air loss
• Restores exterior appearance and proper alignment for smooth opening and closing
• Helps stop intermittent cooling issues caused by warped or damaged doors
• Works with existing hinges, gasket, and trim where applicable

• Turn off and unplug appliance before starting work; remove food and loose shelving
• Keep fasteners and trim in a safe place during disassembly to avoid loss
• Verify hinge type and mounting locations match your appliance before installation

This refrigerator door hinge lets the door pivot smoothly and maintain proper alignment for a secure, even seal. Replace a worn or damaged hinge to stop door sag, rubbing, or uneven closing and help restore normal operation. What it does:

• Provides a stable pivot point for the refrigerator door so it opens and closes correctly
• Restores proper door alignment to improve gasket sealing and cooling efficiency
• Stops symptoms like a sagging or misaligned door, noisy hinge operation, or door rubbing
• Durable metal construction designed for repeated use under normal household conditions

• One refrigerator door hinge

• Unplug the appliance or disconnect power before starting any repair
• Support the door while removing and installing the hinge to prevent injury or damage
• Keep fasteners and any small parts organized; tighten screws snugly but avoid over-torquing
• Adjust hinge and striker positions per manufacturer guidance

A small mounting spacer used to position and support appliance components for correct alignment and stable operation. Replaces a worn or missing spacer to help restore proper fit between panels and parts. What it does:

• Keeps panels, brackets, or components spaced correctly to prevent rubbing and misalignment
• Helps reduce vibration and rattling caused by gaps or loose fits
• Restores correct clearance for moving parts that need precise spacing
• Used wherever a fixed gap or support is required between parts

• Disconnect power (and fuel or water if applicable) before beginning any repair
• Access may require removing outer panels, trim, or adjoining components
• Keep orientation and placement the same as the original spacer; install snugly but avoid over-tightening
• If other parts show wear or damage, inspect and replace them as needed for a complete repair

This drum roller supports the dryer drum and helps it turn smoothly, reducing friction and noise. Replacing a worn roller restores quieter operation and helps prevent drum wobble and uneven tumbling. What it does:

• Supports the rotating drum so it spins freely and evenly.
• Reduces squeaks, grinding noises and excessive vibration from a worn wheel.
• Helps prevent drum wobble that can lead to uneven drying or wear on other components.
• Works with the drum shaft/bearing system to maintain proper drum alignment.

• Disconnect power (and gas, if applicable) before starting any service.
• Remove the dryer drum to access and replace the roller—follow your model's service manual or OEM instructions.
• Inspect adjacent rollers, bearings and the shaft for wear while the drum is removed.

The Handle is an OEM part for Frigidaire ovens that allows you to easily open and close the oven door while ensuring a secure grip.

A bad oven door handle can be caused by wear and tear over time, physical damage, or component failure. Signs of a faulty handle include a loose or wobbly grip, a handle that feels hot to the touch during oven operation, or difficulty in opening or closing the oven door.

Symptoms of a bad oven door handle include:

• Loose grip when attempting to open or close the door
• Handle hot to the touch 
• Cracks, scratches or discoloration

Replace your worn-out or damaged oven door handle with this genuine OEM Frigidaire part to restore your oven. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Color: Black

The Handle is an OEM part for Frigidaire ovens that allows you to easily open and close the oven door while ensuring a secure grip.

A bad oven door handle can be caused by wear and tear over time, physical damage, or component failure. Signs of a faulty handle include a loose or wobbly grip, a handle that feels hot to the touch during oven operation, or difficulty in opening or closing the oven door.

Symptoms of a bad oven door handle include:

• Loose grip when attempting to open or close the door
• Handle hot to the touch 
• Cracks, scratches or discoloration

Replace your worn-out or damaged oven door handle with this genuine OEM Frigidaire part to restore your oven. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Color: White

This support bracket secures and stabilizes appliance components, restoring proper alignment and stopping movement. It's a simple replacement that helps reduce rattling and prevents panels or assemblies from shifting during use. What it does:

• Provides a rigid mounting point to hold panels, trim, or internal assemblies in place
• Restores proper alignment when a worn or broken bracket causes gaps or looseness
• Reduces vibration and rattling caused by a damaged or missing support
• Keeps connected parts from shifting, which can prevent further wear or damage

• Disconnect power to the appliance before beginning any repair
• Verify the bracket orientation and fit against the mating surface before fastening
• Use the factory screw locations and hardware; tighten screws securely but avoid over-torquing

This appliance screw fastens panels, brackets, and other components inside the unit. Replace a missing, rusty, or stripped fastener to restore a secure fit and help prevent rattles, misalignment, or premature wear.

• Secures appliance components such as panels, brackets, and covers
• Restores proper fit when an original screw is missing or stripped
• Helps reduce vibration and noise from loose parts
• Common signs: loose or misaligned parts, rattling, or a missing screw

• Disconnect power before servicing
• Match the new screw to the original for size and thread before installing
• Hand-start threads to avoid cross-threading; do not overtighten
• Reuse any original washers or clips if they were used with the old screw

This replacement screw secures panels and components on compatible Frigidaire appliances, restoring proper fit and reducing noise from loose parts. Use when a missing or damaged fastener prevents panels, trim, or brackets from seating correctly. What it does:

• Fastens panels, trim pieces, or brackets to the appliance frame
• Restores proper alignment and reduces rattling or vibration
• Replaces missing, stripped, or damaged fasteners to improve safety and appearance
• Helps maintain secure electrical and mechanical connections where a small screw is required

• Turn power off to the appliance before accessing internal panels or components
• Use the correct screwdriver to avoid stripping the head; do not overtighten
• If other fasteners are corroded or damaged, replace them as well for a secure fit

This spacer sets the correct gap between mating parts in your appliance's assembly, preventing rubbing and misalignment. Replace a missing or worn spacer to restore a solid fit, reduce noise, and protect surrounding components.

• Maintains proper spacing between components for correct alignment and operation
• Reduces metal-to-metal contact, squeaks, and premature wear
• Helps fasteners and panels seat securely
• Typical symptoms when failed: loose or rattling parts, uneven gaps, or visible wear marks

• Disconnect power; for gas models, shut off the gas. Allow the appliance to cool completely.
• Access the assembly per your model's diagram; note the original orientation/stack-up before removal.
• Reuse original fasteners if serviceable; hand-start threads and tighten snugly to avoid damaging the spacer.
• Verify alignment and clearances before fully reassembling. Quantity and location vary by model.

Replacement screw that secures panels, trim and internal components in compatible appliances. Restores proper fit and helps reduce rattling or loose parts when the original fastener is missing, worn, or damaged. What it does:

• Fastens panels, brackets, trim pieces and small component assemblies to the appliance frame
• Helps eliminate noise and vibration caused by loose or missing fasteners
• Replaces stripped, corroded or missing screws to restore secure mounting
• Matches OEM fit when the identical screw is required for proper alignment

• Disconnect power to the appliance before starting any repair
• Use the correct driver size to avoid cam-out or damage to the screw head
• Do not overtighten; overtightening can strip threads or crack plastic parts

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.