Parts for Ge PGB911DEJ1BB: Door & Drawer Parts

Base spacer for gas ranges. Installs at the bottom of the range to provide proper spacing and support. Replace if cracked, broken, or missing.

Speed nut clip secures your range oven bottom panel. Replace when missing or damaged to prevent panel rattling. Verify fit with your model number.

Right-side door hinge for gas ranges. Replace this pivot component if your oven door is misaligned, sagging, or the hinge is cracked or damaged from wear.

Pivot hinge that supports the range oven door for smooth opening and closing. Replace if broken, cracked, or door won't stay properly aligned.

This right side broil panel replaces a damaged or worn oven side broiler trim to restore the oven's interior fit and appearance while helping contain broiler heat. Easy visual repair for charred, dented, or warped side trim. What it does:

• Replaces the right-side broil trim panel that protects the oven cavity and broiler area
• Helps restore proper sealing and fit along the broiler side, reducing gaps and drafts
• Addresses visible damage such as dents, burn marks, or warped metal around the broil area
• Improves overall appearance of the oven interior by replacing corroded or discolored trim

• Disconnect power to the oven before starting any repair
• Minor disassembly of oven trim or racks may be required; keep fasteners organized
• Handle edges carefully—panel edges can be sharp

Positions and supports internal components to maintain proper alignment and clearance. Replace if cracked, broken, or missing to restore stability.

This left side broil panel restores the interior side surface next to the broiler for safe, even heat containment and a finished oven interior appearance. It replaces a damaged, dented, or discolored side panel to help the broiler operate as intended. What it does:

• Covers the oven's left broil compartment side to protect internal components and reflect heat
• Restores a flat, finished cooking cavity surface when the original panel is bent, warped, or chipped
• Helps maintain proper broil chamber heat distribution and appliance aesthetics
• Matches factory fit and mounting locations for straightforward replacement

• One left side broil panel

• Remove power to the appliance before starting any service to avoid shock or injury
• Basic disassembly of the oven cavity or broiler assembly is required; keep fasteners and hardware organized
• Handle the panel carefully to avoid sharp edges; wear gloves and eye protection

Support base for electric and gas ranges. Installs at the bottom to provide structural stability. Replace if cracked, broken, or damaged over time.

Support base for range and wall oven. Provides stability and structural support for the appliance. Replace if cracked, broken, or damaged over time.

Replacement leveling leg for ranges. Installs at base corners to stabilize and level your range on uneven floors. Needed when leg is broken or missing.

Range drawer slide and bearing kit replaces worn glides for smooth operation. Install when drawer sticks, derails, or won't close properly. Confirm fit.

Wire clip secures electrical connections to heating elements in ranges. Replace if worn, cracked, or loose to restore proper contact. Verify fit with model.

Range drawer body assembly forms the main structure of your storage or warming drawer. Replace if cracked, damaged, or missing to restore proper drawer function.

Insulation panel for electric and gas ranges. Installs inside the range cavity to provide thermal protection. Replace if torn, deteriorated, or missing.

Replace cracked, shattered, or stained oven door window glass. Clear glass pane restores viewing into the oven cavity. Installs in door assembly.

Inner door liner weld assembly for range ovens. Installs inside the door to restore structural integrity. Replace if cracked, bent, separated, or missing.

Secures and supports your range drawer to prevent sagging and ensure smooth operation. Replace when drawer misaligns or wobbles. Confirm fit with your model.

Bottom door deflector for gas ranges. Replaces cracked, broken, or missing deflector panels that install on the lower oven door assembly.

Replacement mounting screws for ranges and ovens. Secures panels, brackets, and components. Includes 12 screws. Order when original screws are missing.

If your oven isn't maintaining temperature or has poor heat distribution, this barrier door assembly restores proper sealing and airflow control.

Replace your cracked, broken, or worn range oven door handle. This black handle installs on the front door for opening and closing your range oven.

A replacement handle mounting bracket that secures an appliance door handle to the door surface for safe, stable operation. Restores a loose or broken handle attachment so the handle stays firmly in place during use. What it does:

• Secures the door handle to the appliance door and provides a stable attachment point.
• Replaces a broken, cracked, or bent bracket that lets the handle wobble or detach.
• Helps eliminate handle movement and restore normal handle function.
• Compatible with the original handle mounting points to maintain proper alignment.

• Safety first: disconnect power and/or unplug the appliance before starting any repair.
• Use basic hand tools (screwdriver, socket) to remove trim or screws holding the old bracket; keep fasteners for reassembly.
• Support the handle while removing and installing the bracket to avoid dropping or damaging the door.
• Do not overtighten screws; snug fasteners to secure the bracket without stripping threads.

This handle bracket secures a refrigerator/freezer door handle to the appliance, restoring a solid grip and proper door operation. It replaces a worn, cracked, or broken bracket to keep the handle aligned and stable during use. What it does:

• Provides the mounting support for a door handle so the handle stays firmly attached
• Restores proper handle alignment to reduce wobble or shifting when opening the door
• Stops slipping or intermittent detachment caused by a cracked or damaged bracket
• Helps prevent further damage to the door or handle from continued use with a broken mount

• One handle bracket

• Designed for direct replacement; compare part number to the original before ordering
• Basic hand tools typically required; handle and trim may need removal to access bracket
• Disconnect power (and empty door area) if working near electrical components or lights
• If mounting hardware isn't present, reuse the original screws or order the specific fasteners listed by the OEM

Fiberglass gasket cord for range door or panel sealing. Replaces worn, frayed, or missing cord that no longer seals properly. Ensures tight fit.

A replacement inner door insulation that restores the refrigerator door's thermal barrier to help maintain proper temperature and reduce condensation. Fits behind the door panel to support efficient cooling and prevent cold air loss. What it does:

• Replaces damaged or compressed insulation that can allow cold air to escape
• Helps reduce moisture buildup and frost on the door interior
• Supports consistent internal temperatures for better food preservation
• Dampens noise and helps the door close more evenly

• Disconnect power to the appliance before starting any repairs
• Remove the door panel and any trim or handles to access the insulation
• Handle carefully around sharp sheet metal and retain any fasteners for reassembly
• Use the exact replacement part number for proper fit; avoid forcing or trimming the insulation