Parts for Ge PGS920SEF1SS: Door & Drawer Parts

This bracket secures oven door glass to the door frame, restoring proper alignment and preventing loose or rattling glass. Designed to match the original mounting points for a secure fit. What it does:

• Holds the oven door glass in place so the door opens and closes evenly
• Prevents the glass from shifting, rattling, or touching internal components
• Helps restore a tight seal for consistent cooking temperatures
• Addresses symptoms like loose, vibrating, or uneven door glass

• Disconnect power to the appliance before starting any repair
• Handle glass carefully; wear gloves and eye protection to avoid cuts
• This part installs from the inside of the oven door; refer to the service manual for disassembly steps
• If glass or other door components are damaged, replace all affected parts for safe operation

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

Panel mounting screw secures trim, bezels, and internal components on ranges and cooktops. Replace when stripped, corroded, or missing to restore fit.

Restores proper door alignment and smooth opening for your range. Replace when door sags, binds, or won't seal. Confirm fit with your model number.

Fix a range door that won't close fully or sags open with this left-side door hinge. Restores proper alignment and secure latching. DIY-friendly repair.

Left hand side

Right hand side

Replace your range's access spring cover if it's cracked, broken, or missing. This protective housing installs over the spring mechanism for a complete look.

Left-hand drawer slide assembly for electric and gas ranges. Replaces cracked, broken, or worn slides that cause drawers to stick or misalign.

Right-hand slide assembly for range warming drawers. Replaces cracked, broken, or worn drawer glides that prevent smooth drawer operation.

Replacement mounting screw for electric and gas ranges. Secures internal components and panels. Needed when original screws are stripped, missing, or lost.

Replace cracked, shattered, or stained oven door window glass. Clear glass pane restores viewing into the oven cavity. Installs in door assembly.

Single speed nut fastener that provides threads for screws on appliances. Secures sheet-metal panels, brackets, or trim. Replace if missing or worn.

Insulation pad that installs in the warming drawer cavity of your gas range. Replace if worn, damaged, or missing to restore heat retention and soundproofing.

Replacement mounting screws for ranges and ovens. Secures panels, brackets, and components. Includes 12 screws. Order when original screws are missing.

Inner glass window for range oven doors. Mounts inside the door frame to provide visibility while cooking. Replace when cracked, broken, or shattered.

Door liner weld assembly for ranges. Structural component that forms the inner door frame. Replace if cracked, warped, or damaged from heat exposure.

Secures the lower storage drawer assembly to your range cabinet. Replace this stamped metal bracket if cracked, bent, or missing to restore alignment.

Screw for electric and gas ranges. Secures internal components and panels. Replace if lost, stripped, or corroded to properly fasten range parts.

If your oven isn't maintaining temperature or has poor heat distribution, this barrier door assembly restores proper sealing and airflow control.

Replacement oven door handle assembly with end caps for gas and freestanding ranges. Installs on the oven door. Needed when handle is broken, cracked, or end caps are missing.

Replacement mounting screw for appliances. Secures components and reduces vibration. Needed when original screws are missing, stripped, or damaged.

Black painted screw head cover cap for ranges. Conceals exposed screws on panels and trim pieces. Replace if cracked, chipped, missing, or worn.

Replacement drawer front panel for your range. Restores the appearance of a cracked, dented, or worn drawer face. Direct fit for select models.

Range heating element not working or uneven cooking? This silicon controlled rectifier regulates power to heating elements on your control board.

Replace your range's cooktop cover top panel if it's cracked, chipped, or damaged. This glass or metal panel protects internal components and gives your stovetop a finished appearance.

Fiberglass gasket cord for range door or panel sealing. Replaces worn, frayed, or missing cord that no longer seals properly. Ensures tight fit.

If your oven won't reach temperature or the outer door gets too hot, the door insulation panel may be damaged. Restores heat retention and safety.

Insulation panel for electric and gas ranges. Installs inside the range cavity to provide thermal protection. Replace if torn, deteriorated, or missing.

Replacement support handle for range oven doors. Installs on the door frame to provide stability and secure mounting. Order now if yours is cracked or broken.

A replacement inner door insulation that restores the refrigerator door's thermal barrier to help maintain proper temperature and reduce condensation. Fits behind the door panel to support efficient cooling and prevent cold air loss. What it does:

• Replaces damaged or compressed insulation that can allow cold air to escape
• Helps reduce moisture buildup and frost on the door interior
• Supports consistent internal temperatures for better food preservation
• Dampens noise and helps the door close more evenly

• Disconnect power to the appliance before starting any repairs
• Remove the door panel and any trim or handles to access the insulation
• Handle carefully around sharp sheet metal and retain any fasteners for reassembly
• Use the exact replacement part number for proper fit; avoid forcing or trimming the insulation

This silicon controlled rectifier (SCR 8-22) is a replacement power-switching semiconductor used in appliance control and ignition circuits to help control current flow for heating and ignition components. Installing the correct SCR restores reliable switching and can stop intermittent or complete loss of heater/igniter function. What it does:

• Acts as a high-current electronic switch that controls power to heating or ignition elements when driven by the appliance control board
• Replaces a failed SCR to resolve symptoms like no ignition, no heating, intermittent power to elements, or control board error codes related to switching
• Works as part of the appliance's control/ignition circuit to ensure timed, controlled delivery of current
• Matches common OEM/catalog designation "SCR 8-22" for direct replacement where specified

• One SCR 8-22 replacement semiconductor

• High-level replacement only: follow the appliance service manual for location and wiring; ensure correct orientation and connector fit
• Disconnect power at the breaker and confirm no line voltage before servicing
• Handle the SCR and surrounding electronics carefully to avoid ESD damage; use proper grounding

This diverter assembly routes water flow between dishwasher spray arms so the washer delivers water where it's needed for cleaning. Durable replacement for a worn or damaged diverter to restore proper water distribution. What it does:

• Directs incoming wash water to the correct spray arm(s) during the cycle
• Can stop or reduce water flow to a spray arm when a diverter fails
• Commonly replaced when upper or lower spray arms receive little or no water
• Helps prevent uneven cleaning caused by improper water routing

• One diverter assembly as shown

• Disconnect power and water supply before starting any repair
• Access may require removing the dishwasher tub spray assembly or access panels; follow OEM disassembly steps
• Inspect surrounding seals and mounting points and replace any damaged hardware