Parts for Ge PSA9240SF2SS: Door Parts

This manufacturer-supplied OTR hardware bag contains the mounting and fastener pieces used to secure an over-the-range microwave during installation or reinstallation, helping restore proper attachment and stability. What it does

• Provides the manufacturer-specified mounting hardware used to fasten an over-the-range unit to the cabinet and wall.
• Replaces missing or damaged fasteners that can prevent secure installation.
• Helps correct issues like a loose, rattling, or improperly seated OTR microwave.
• Intended to be used with the appliance's original mounting points and installation instructions.

• Follow the appliance manufacturer's installation instructions exactly; hardware must match the installation procedure for your model.
• Disconnect power before working on the appliance and ensure the unit is supported during installation.
• Use appropriate tools and, when lifting or positioning the microwave, have a second person assist to avoid injury or damage.

This microwave choke cover snaps over the inner edge of the door to conceal and secure the door's RF choke assembly. Replacing a damaged or missing cover restores a finished look and helps ensure proper door shielding and latch alignment.

• Covers and protects the door's RF choke area/liner
• Helps maintain correct door fit and shielding performance
• Common symptoms: loose or missing inner door trim, cracked/broken cover, gaps around door edge, rattling from door area
• Color/finish and texture may vary by model application

• Disconnect power to the microwave before servicing
• Use non-marring tools to release clips and avoid scratching the door
• Transfer any reusable clips/tabs from the old cover if required by your model
• Press firmly around the perimeter to seat all retaining tabs; inspect for even gaps

This is a door latch used in microwave ovens. The door latch is tasked with preventing the appliance from operating if the door is open. The door latch connects with the microwave door and can turn on the door switch whenever the door is in the closed position. If the latch is damaged or broken, the door may be difficult or impossible to open or close. If the latch is not catching, the microwave will not recognize the door as closed and it will not work, so a damaged latch should be replaced to continue using the appliance.The process of replacing the microwave door latch is fairly simple and doesn't take a lot of time. First, make sure that the microwave oven is unplugged. The latch is a plastic part with a spring attached to it to ensure the hooks are engaged to provide downward tension. Remove the inner door panel to reach the door latch. Take it out of the plastic hooks and gently replace it with a new component.This door latch is made to be compatible with microwave ovens manufactured by GE. It is an authentic OEM replacement component that is directly sourced from the manufacturer. This component is sold as an individual unit.

This door latch spring restores the correct return tension in the latch mechanism so the door secures and releases reliably. Replacing a fatigued or broken spring brings back smooth latch action and dependable door operation. What it does:

• Provides the return tension for the door latch mechanism
• Helps the latch engage and release properly
• Common failure signs include a door that won't latch or pops open, or a latch lever that feels loose or sticks
• Some cycles may not start if the door isn't recognized as closed

• 1 door latch spring

• Disconnect power before servicing
• Access the latch mechanism; note the spring's original routing and anchor points
• Use needle-nose pliers and eye protection when removing/attaching the spring
• Test latch movement and door operation before reassembly

This outer refrigerator door panel assembly restores the exterior finish and structural support of a damaged or dented door. It replaces a worn or cracked outer panel to improve appearance and protect internal door components. What it does:

• Replaces a damaged, dented or cracked outer door surface to restore the fridge's look
• Protects insulation, wiring and inner liners from exposure or further damage
• Provides the correct mounting surface for handles, hardware and trim
• Helps maintain a flush exterior for proper door alignment and operation

• One outer door panel assembly (as shown)

• Unplug the appliance or shut off power before beginning work
• Support the door to prevent dropping when removing hinges or fasteners
• Remove handles, trim and hardware per your model's service instructions; transfer components as needed
• Verify proper alignment and gasket seating after installation; tighten fasteners evenly

The Microwave Door Handle is an OEM part for GE microwaves. It is designed to provide a sturdy and reliable grip for opening and closing the microwave door. This handle attaches securely to the microwave door, ensuring easy and safe access to the microwave's interior.

You should replace the microwave door handle if it becomes damaged or loose. Causes of a bad door handle can include frequent use leading to wear and tear, accidental impacts, or exposure to high temperatures. A broken or faulty handle can make it difficult or unsafe to open and close the microwave door.

Symptoms of a bad microwave door handle include:

• Cracks or breaks in the handle
• The handle feeling loose or wobbly
• Difficulty in gripping or using the handle to open the door
• The handle detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.