Parts for Kenmore 795.71314310 (79571314310, 795 71314310): Door Parts

This screw is a direct-fit replacement fastener that secures panels, brackets, and internal components. Replacing a missing or stripped screw helps stop rattling and keeps parts aligned for reliable operation. What it does:

• Secures panels, trim, brackets, or internal components to restore proper fit
• Replaces missing or damaged hardware that can cause rattling or loose parts
• Restores alignment so doors, shelves, or assemblies operate smoothly
• Provides a straightforward hardware fix without replacing larger assemblies

• Use the matching screwdriver or driver bit to avoid stripping the head
• Do not overtighten — snug until seated to avoid damaging threads or plastic parts
• Disconnect power or follow appliance safety instructions before servicing electrical areas
• Keep removed hardware organized and save any damaged parts for inspection

This door gasket assembly replaces a worn or damaged refrigerator door seal to restore a tight enclosure and help maintain consistent cooling. It provides a new pliable sealing surface that reduces air leaks and helps prevent frost or moisture buildup. What it does:

• Creates a full seal around the refrigerator door to minimize cold air loss and warm air intrusion.
• Helps reduce frost buildup, water pooling, and excessive compressor run time caused by a leaking seal.
• Restores proper door contact when the original gasket is torn, deformed, or no longer magnetically sealing.
• Improves temperature stability for better food preservation and energy efficiency.

• One door gasket assembly

• Disconnect power to the appliance before starting and follow manufacturer safety guidelines.
• Inspect and clean the gasket channel and door surface before installing the new seal for best fit.
• Align the gasket into the channel and press evenly; some models may require loosening the door or removing trim for access.

This small stopper fits inside the handle assembly to limit travel and keep the handle properly seated. Replacing a worn or missing stopper restores a solid, secure feel when opening and closing your appliance.

• Provides a positive stop for handle movement
• Helps keep the handle aligned and seated against its mounts
• Replaces a cracked, deformed, or missing stopper
• Common signs: handle feels loose or wobbly, over-rotates, or shifts/clicks during use

• Unplug the appliance before servicing to prevent injury
• Support the handle and protect the finish while removing fasteners
• Note the original stopper's orientation and install the new one the same way
• Tighten fasteners evenly; do not overtighten to avoid damaging plastic or finishes

The Refrigerator Set Screw is an OEM part for LG refrigerators. This small but crucial component is used to secure various parts of the refrigerator, ensuring stability and proper alignment of the internal components. This set screw is sold individually.

Causes of a bad set screw can include stripping due to over-tightening, corrosion from moisture exposure, or wear and tear over time. A loose or missing set screw can lead to instability and misalignment of the refrigerator parts, potentially causing operational issues.

Symptoms of a bad refrigerator set screw include:

• Loose or wobbly internal components
• Doors not closing properly or misaligned
• Unusual noises from inside the refrigerator
• Parts becoming detached or misaligned

This OEM LG part is also compatible with Sears/Kenmore models.

This replacement door gasket assembly seals the refrigerator door to help maintain proper temperature and reduce energy loss. It restores the seal around the door edge for better cooling performance and food preservation. What it does:

• Creates an airtight seal around the refrigerator door to limit cold air escape
• Helps maintain consistent internal temperature for food safety
• Reduces frost buildup and excessive compressor run time when working properly
• Addresses symptoms such as warm spots near the door, visible gaps, or persistent condensation

• One door gasket assembly

• Inspect the door and mounting channel for debris before installing; clean with mild detergent and dry completely
• Gasket typically stretches into a channel and secures around the door perimeter—avoid sharp tools that can damage the seal
• For best results, install at room temperature; warm the gasket gently if needed to ease fitting

This door gasket assembly replaces a worn or damaged refrigerator door seal to restore an airtight closure and help maintain proper cooling. It fits the door's perimeter and creates the seal between the cabinet and door. What it does:

• Seals the refrigerator door to retain cold air and improve temperature stability.
• Prevents warm air intrusion that can cause frost buildup or increased energy use.
• Helps reduce condensation and water leaks around the door area.
• Restores proper door alignment and closing when old gasket is torn, stretched, or deformed.

• Unplug the appliance and remove food from the door area before starting.
• Work with the door propped or supported; follow OEM removal steps for existing gasket tabs or clips.
• Gently warm and flex the new gasket if needed for easier seating; avoid sharp tools that can puncture it.
• After installation, check the seal around the full perimeter and allow a short run cycle to verify proper operation.

This replacement door basket is the refrigerator door shelf bin that restores secure storage for bottles, jars and deli items. It replaces a cracked or broken bin to keep door contents organized and prevent spills. What it does:

• Provides stable storage on the refrigerator door for bottles, jars and small containers
• Replaces broken, cracked or warped bins that no longer hold items securely
• Helps prevent items from shifting or falling when opening the door
• Matches original mounting points to fit into the existing door rail system

• Remove all items from the door and lift out the old basket; snap the new basket into the existing door rails
• No tools typically required, but check your refrigerator's service manual for specifics
• Handle replacement parts carefully to avoid damage to mounting tabs or nearby trim
• Disconnect power only if removing panels that expose electrical components; otherwise no power disconnection is usually needed

This door basket is a genuine replacement shelf that secures food and containers in the refrigerator door, restoring lost storage and organization. Its durable plastic construction snaps into the door track for stable, everyday use. What it does:

• Provides a secure shelf for bottles, condiments and small containers on the fresh food door
• Replaces cracked, warped or missing door bins that no longer hold items securely
• Restores proper door storage to prevent items from shifting or falling when opening the door
• Matches OEM fit and mounting points for a direct-replacement installation

• One door basket

• Install by removing the old bin: lift and unclip from the door track, then align new basket and press until it snaps into place
• No tools usually required; handle carefully to avoid scratching door interior; do not force into misaligned tracks
• Keep children and pets away during replacement; disconnect power only if necessary for related disassembly

This replacement door basket mounts on the refrigerator door to hold bottles, jars, and condiments. It restores secure, easy-access storage when the original bin is cracked, damaged, or missing.

• Attaches to the inner door rails to organize items on the door
• Keeps contents in place as the door opens and closes
• Replaces a cracked, broken, warped, or missing bin
• Symptoms include broken tabs, bin won't stay seated, or reduced door storage

• Remove items from the old bin; lift up to release it from the door rails
• Align the new basket's hooks with the door slots and lower until fully seated
• Confirm the bin is level and secure before loading
• No tools typically required; avoid overloading to prevent damage

The Basket Assembly, Door is an OEM part for LG refrigerators. Designed to enhance storage and organization within the refrigerator door, this basket assembly allows for convenient access to frequently used items such as condiments, drinks, and snacks.  

Causes for replacement can vary, including damage from overloading, impact from items being moved in and out, or normal wear over time. A malfunctioning basket assembly can lead to inefficient use of space, difficulty in keeping the refrigerator organized, and potential spills or damage to stored items.

Symptoms of a bad Basket Assembly, Door include:

• Difficulty in fitting or securing the basket into the door
• Cracks or damage that compromise its ability to hold items
• Wear or sagging that affects the basket's performance and appearance

This OEM LG part is also compatible with some Kenmore models.

STOPPER ASSEMBLY,DOOR

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators, designed to support and pivot the refrigerator door, allowing it to open and close smoothly. This hinge is a critical component for the proper alignment and function of the door, ensuring an airtight seal when closed to maintain the internal temperature and efficiency of the refrigerator.

Causes of damage to the lower refrigerator door hinge often include normal wear and tear, excessive force when opening or closing the door, or corrosion due to moisture and cleaning agents. 

Symptoms of a bad Lower Refrigerator Door Hinge include:

• Difficulty in opening or closing the refrigerator door.
• A door that hangs unevenly or does not close properly
• Unusual noises during door operation 
• Visible wear or damage to the hinge itself.

This OEM LG part is also compatible with some Kenmore models.

RAIL,SLIDE-LEFT

RAIL,SLIDE-RIGHT

This connector assembly links refrigerator components with a secure, factory-style connection. Replace a damaged or loose connector to restore reliable operation and prevent intermittent performance of the part(s) attached to it. What it does:

• Joins two factory leads/components with a secure locking interface
• Restores a stable connection so the attached component operates reliably
• Helps address intermittent operation, no response, or flickering due to worn or heat-damaged connectors
• Replaces connectors with broken locking tabs, loosened contacts, or visible melting/corrosion

• 1 connector assembly

• Disconnect power before servicing; if working near water lines, also shut off the water supply
• Note connector orientation and routing; take photos to aid reassembly
• Depress the locking tab to release; avoid pulling on wires
• Seat the new connector fully until it locks; route away from sharp edges and moving parts