Parts for Kenmore 795.73065410 (79573065410, 795 73065410): Door Parts

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

The Freezer Door Gasket is an OEM part for LG side-by-side and bottom-freezer refrigerators. This gasket forms an important insulating seal around the freezer door compartment, preventing warm air from entering the sealed interior. Maintaining proper freezing temperatures depends on an intact door gasket.

Causes of a bad freezer door gasket can include cracks, deterioration, or compression from repeated opening and closing of the freezer door over time. Food debris trapped against the gasket rim can also damage sealing integrity.

Symptoms of a bad freezer gasket include:

• Difficulty closing or sealing the freezer door properly
• Warm air leaking into the freezer sections
• Frost and ice buildup occurring faster than usual
• Higher energy bills from the freezer running excessively

This replacement freezer door gasket from LG is also compatible with some Kenmore-brand refrigerators.

This hinge cap covers and protects the door hinge, keeping the hinge assembly clean and improving the appliance's appearance. It replaces a cracked, missing, or worn hinge cover to help doors operate smoothly and look finished. What it does:

• Covers the door hinge to protect mating surfaces from dirt and damage
• Hides hinge hardware for a cleaner, finished look
• Helps prevent debris from interfering with hinge movement
• Can resolve cosmetic issues and reduce risk of snagging on exposed hinge parts

• One hinge cap

• Remove power and open the door to a safe, supported position before starting
• Typically snaps or screws onto the hinge—retain original fasteners unless replacement required
• Inspect hinge and fasteners while installing; replace any damaged hardware

This is a direct-fit freezer door handle assembly that restores a secure, easy-to-grip pull for your freezer door. It replaces a cracked, loose, or missing handle so the door opens and closes with confidence. What it does:

• Replaces a damaged or broken freezer door handle to restore safe, reliable pulling force
• Stops looseness or wobble at the door edge and prevents further chipping or cracking
• Matches OEM mounting points for a crisp fit and correct alignment
• Improves door appearance by replacing a scratched or warped handle

• Basic hand tools are typically required; remove the old handle by unscrewing the mounting fasteners and install the new assembly in the same orientation
• Keep the door supported while removing or installing the handle to avoid pinching or misalignment
• Disconnect power only if removing interior trim or accessing electrical components; this handle replacement usually does not require power disconnection
• If fasteners or clips appear stripped or damaged, replace them with OEM-specified hardware for a secure fit

The Refrigerator Door Gasket is an OEM part for LG refrigerators. It's designed to create an airtight seal around the refrigerator door, preventing warm air from entering and cold air from escaping. The gasket is made from a flexible material that conforms to the door's edges, ensuring a snug fit against the refrigerator frame.

Causes of a bad door gasket include frequent opening and closing of the refrigerator door, exposure to harsh cleaning chemicals that can degrade the material, and natural wear and tear. 

Symptoms of a bad Refrigerator Door Gasket include:

• Condensation or frost buildup near the door edges.
• The refrigerator runs more frequently or for longer periods.
• A noticeable increase in your electricity bill.
• The gasket feels brittle or has visible cracks, tears, or gaps.

This OEM LG part can also be used on Kenmore/Sears appliances. 

The Refrigerator Door Gasket is an OEM replacement part for LG refrigerators. It is a crucial component that seals the gap between the refrigerator door and the main body, creating an airtight seal to maintain the desired temperature and humidity levels inside the appliance. It has approximate dimensions of 2" x 41" x 20".

Symptoms of a bad refrigerator door gasket include:

• Warm air leaking into the refrigerator compartment
• Excessive frost or ice buildup in the freezer
• Condensation forming on the interior walls or shelves
• Higher energy consumption due to the refrigerator working harder to maintain the set temperature

Causes of a bad door gasket can include physical damage, such as tears or cracks, due to impact or wear and tear over time. It can also become stiff or lose its pliability, preventing a proper seal.

This OEM LG part is also compatible with Sears/Kenmore models.

The Refrigerator Flipper Assembly is an OEM part for LG refrigerators. This assists in the smooth opening and closing of the refrigerator door. It ensures an airtight seal when the door is closed, preventing cool air from escaping and maintaining the refrigerator's internal temperature. 

Causes of a malfunctioning Refrigerator Flipper Assembly can range from physical damage, such as cracks or breakage, to wear and tear from regular use.

Symptoms of a bad Refrigerator Flipper Assembly include:

• Difficulty in opening or closing the refrigerator door
• A noticeable gap when the door is supposed to be sealed shut
• Increased energy consumption as the refrigerator works harder to maintain its temperature
• Spoilage of food items quicker than expected due to poor temperature regulation

This OEM LG part is also compatible with some Kenmore models.

This door basket is a direct-fit replacement door bin that restores usable storage space on the appliance door and keeps bottles, jars and condiments secure. Durable molded plastic resists everyday wear and water exposure. What it does:

• Replaces a cracked, warped or missing door bin to restore door storage
• Holds bottles and jars upright to prevent spills and clutter
• Secures items behind the door seal so they don't shift when opened
• Matches factory fit and mounting points for reliable operation

• One door basket

• Remove food and items from the door before replacing the bin
• Most installs require only hand tools; handle plastic parts carefully to avoid cracking
• Align tabs and mounting slots, then snap or screw the bin into place per the appliance's factory method

This Door Basket is a replacement door-mounted storage basket that restores inside-door storage and helps keep items organized and accessible. It fits the original door mounting points to return usable shelf space. What it does:

• Provides a rigid storage shelf mounted to the appliance door for bottles, jars, and small containers
• Restores lost or damaged door storage to improve organization and access
• Replaces cracked, broken, or missing door basket that causes items to fall or shift
• Matches original mounting locations for a secure fit when installed correctly

• 1 door basket

• Remove power to the appliance and empty the door before starting work
• Align with existing door mounting clips or screws and secure using the original hardware
• Inspect surrounding door trim and seals for damage during installation

This replacement door basket restores door storage space and keeps bottles, condiments and small containers organized on the refrigerator door. It provides a secure shelf where the original bin is cracked, warped or missing. What it does

• Replaces a damaged or missing refrigerator door bin so items sit securely on the door
• Restores lost storage capacity for bottles, condiments and small containers
• Fits into existing door mounting tracks or snap locations to lock items in place
• Commonly used when the original basket is cracked, broken at the mounts or no longer holds items

• Unplug the appliance or disconnect power before starting any repair
• Empty the door bin and remove any clips or screws holding the old basket
• Align the replacement bin with the door tracks or mounting tabs and press or secure into place until it clicks
• Do not overload the bin; avoid forcing or bending mounting tabs during install

This cover lever replaces a damaged or worn dispenser lever cover to restore a clean, functional surface for pressing the dispenser. Helps keep debris out of the lever area and supports reliable lever actuation. What it does:

• Covers and protects the dispenser lever mechanism from chips, cracks, and debris.
• Provides a smooth contact surface for pressing the dispenser to activate water/ice dispensing.
• Helps prevent leaks or improper actuation caused by broken or warped lever covers.
• Restores cosmetic appearance at the dispenser area when the original cover is cracked or missing.

• Disconnect power and shut off the water supply before beginning any work.
• Removal typically requires accessing the dispenser bezel or door panel—use basic hand tools and retain all fasteners.
• Handle clips and tabs carefully to avoid breakage; test dispenser function after reassembly.

This is a replacement door bin/basket that mounts to the inner door panel to hold bottles, jars, and condiments. Replace a cracked or missing bin to restore safe, convenient storage and help prevent items from tipping or falling. What it does:

• Provides organized storage on the door for frequently used items
• Locks into the molded tabs on the door liner for a stable fit
• Replaces bins that are cracked, warped, discolored, or won't stay attached
• Helps minimize spills and tipping when the door opens and closes

• 1 door basket/bin assembly

• Remove any contents, then lift the old bin up and out of the door liner tabs
• Align the new bin's hooks with the slots and press down until fully seated
• Verify the bin is securely engaged before loading items
• Clean with mild soap and water; avoid abrasive cleaners or very hot water

The Door Basket Assembly is an OEM part for LG refrigerators. This part enhances the storage capabilities within the refrigerator door, offering a convenient space for condiments, bottles, and smaller food items. 

Over time, door baskets can experience wear, or become damaged or cracked due to overloading or accidental impact. This can compromise their ability to securely hold items, leading to potential spills or damage to stored goods.

Symptoms of a bad Door Basket Assembly include:

• Cracks or breaks in the basket, compromising its structural integrity
• Difficulty fitting the basket securely onto the refrigerator door
• Sagging or inability to hold items properly due to wear or damage

This OEM LG part is also compatible with some Kenmore models.

This bushing provides a low-friction support for a rotating shaft, helping the appliance drum or rotor turn smoothly and quietly. It replaces a worn support to reduce rubbing and uneven movement. What it does:

• Supports a rotating shaft or drum to maintain proper alignment and reduce metal-on-metal contact
• Restores smoother rotation and can reduce squeaks, grinding, or scraping noises
• Helps prevent premature wear of the shaft or housing from excessive play
• Functions as a simple, low-friction bearing surface in the appliance drive assembly

• Disconnect power before beginning any repair to avoid electrical shock or injury
• Access typically requires removing panels or drum/rotor assembly
• Inspect surrounding parts (shaft, seals, mounts) and replace if damaged to prevent repeat wear
• Use appropriate tools and take care not to deform the bushing during installation

STOPPER ASSEMBLY,DOOR

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators. This hinge supports the refrigerator door, allowing it to open and close smoothly while maintaining proper alignment. It is designed to handle the weight of the door and ensure a secure and stable operation over time.

Causes of a bad lower refrigerator door hinge can include regular wear and tear, physical damage from overloading or impacts, and gradual loosening over time. A faulty hinge can lead to misalignment, difficulty in opening or closing the door, and potential damage to the door seal.

Symptoms of a bad lower refrigerator door hinge include:

• The door not closing properly or staying open
• Sagging or misaligned door
• Unusual noises when opening or closing the door
• Gaps in the door seal, causing cooling inefficiency

This OEM LG part is also compatible with Sears/Kenmore models.

This handle assembly replaces a damaged or worn refrigerator door handle to restore a secure grip and normal door operation. Durable, finished replacement designed to match the factory mounting points and appearance. What it does:

• Provides a solid mounting point to open and close the refrigerator door smoothly.
• Replaces cracked, loose, or missing handles that make the door hard to grip or look worn.
• Helps restore proper door alignment and user control when the original handle is bent or broken.
• Preserves the original exterior appearance with a factory-style finish.

• One handle assembly

• Install requires basic hand tools; keep original screws and trim unless new fasteners are provided.
• Power to the appliance is not required for handle replacement; remove any magnetic items from the door before work.
• Align the handle to the factory holes and tighten fasteners securely but do not overtighten to avoid cracking the handle or trim.
• If trim or door finish is damaged, inspect surrounding components before final installation.

This is a refrigerator door handle assembly that restores a secure grip and reliable door opening. Designed to replace a cracked, loose, or broken handle so the door operates smoothly and safely. What it does:

• Replaces a damaged or loose door handle to restore proper grip and leverage
• Provides a stable attachment point for opening and closing the refrigerator door
• Helps eliminate wobbling, cracking, or separation at the handle area
• Matches OEM fit and mounting points for straightforward replacement when correct part is selected

• Inspect mounting hardware and door trim before installation; replace any damaged screws or clips
• Installation typically requires basic hand tools; follow the refrigerator's service manual for step-by-step guidance
• Work on a stable surface and avoid forcing components to prevent damage

This slide rail is a replacement drawer guide that restores smooth, stable drawer movement and helps prevent binding or sagging. Designed to match the OEM fit so drawers open and close reliably. What it does:

• Guides and supports the appliance drawer for smooth sliding motion
• Replaces worn or damaged rails that cause sticking, sticking intermittently, or uneven travel
• Helps prevent drawer tilt or sag when loaded
• Restores proper alignment for secure closing

• Disconnect power to the appliance before beginning any work
• Remove the drawer per your model's service instructions to access the rail
• Use basic hand tools (screwdriver/driver) to remove and replace the rail; keep fasteners for reuse
• Align the rail carefully, slide the drawer to test operation, and verify smooth movement before returning the appliance to service

This slide rail supports and guides a drawer, bin, or rack so it can glide smoothly in and out of the appliance. Replacing a worn or broken rail restores alignment and easy operation while preventing binding or derailment. What it does:

• Provides the track surface for a drawer, bin, or rack to slide on
• Keeps the sliding assembly aligned and level during travel
• Worn rails can crack, warp, or lose mounting tabs over time
• Symptoms include sticking, rough travel, derailment, uneven drawer/rack, or difficulty fully opening/closing

• 1 slide rail

• Disconnect power before servicing; shut off the water supply
• Remove the drawer/rack and any end caps or stops per your model's instructions
• Position and secure the new rail using the original fasteners; transfer any reusable stops
• Reinstall and test for smooth, even travel; inspect the companion rail and rollers/wheels for wear

This spanner is the specialized hand tool used to turn and hold slotted nuts, collars, or fittings on compatible appliances, making service and adjustments easier and safer. It gives a secure grip for loosening or tightening components without damaging surrounding parts. What it does:

• Fits and turns slotted or notched appliance fasteners and collars commonly used in assemblies
• Helps hold a component steady while you loosen or tighten the mating fastener
• Reduces slippage and tool marks compared with pliers or improvised tools
• Useful during maintenance tasks such as removing retaining rings, collars, or adjustable fittings

• One spanner tool

• Disconnect power and/or gas and follow all safety precautions before servicing appliances
• Use the correct size spanner engagement to avoid slipping or rounding the fastener
• Apply steady force; do not use cheater bars or excessive torque unless specified by the manufacturer

This upper hinge assembly replaces the top door pivot on compatible refrigerators to restore proper door alignment and smooth opening. It helps keep the door level and seals evenly to prevent cold air loss and improve operation. What it does:

• Provides the pivot point that supports the top of the refrigerator/freezer door
• Restores proper door alignment when the door is sagging, rubbing, or not closing completely
• Reduces uneven gaps that can cause cold air leakage and frost buildup
• Works with the existing lower hinge and door components to re-establish smooth opening and closing

• One upper hinge assembly

• Disconnect power to the appliance before starting and remove food from the door area as needed
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use the correct hand tools and follow torque recommendations from the manufacturer; avoid overtightening

This button assembly replaces the set of push buttons on the appliance control panel to restore reliable input and a finished appearance. Replaces worn, broken, or unresponsive control buttons so the unit accepts user commands correctly. What it does:

• Provides the user-facing push buttons used to select cycles, options, and start/stop functions
• Restores physical button action for hard-to-press, stuck, or missing buttons
• Helps resolve intermittent or non-responsive control inputs caused by damaged button hardware
• Maintains the original fit and appearance of the control panel

• One button assembly

• Disconnect power before beginning any repair
• Access typically requires removing the control console or top panel—keep fasteners and clips organized
• Handle the assembly carefully to avoid damaging plastic tabs or button contacts
• Test button operation before fully reassembling the console

Replacement front cover that restores your appliance's exterior finish and helps protect controls and internal components from everyday wear, spills, and minor impacts, delivering a clean, finished look and proper front-panel fit. What it does:

• Covers and protects the appliance's front area, helping shield controls and wiring from dirt and moisture.
• Restores damaged or cracked front trim for improved appearance.
• Helps maintain proper alignment and fit of the front assembly.
• Common symptom: cracked, chipped, warped, or loose front panel that exposes internal parts or looks worn.

• Disconnect power (unplug or switch off breaker) before starting any repair.
• Basic hand tools (screwdriver set) may be required to remove the old cover and install the replacement.
• Handle edges carefully to avoid cuts; align tabs/clips and secure fasteners snugly but do not overtighten.

This button holder secures a control panel push button in place so button presses register reliably and the panel stays finished. It restores proper button positioning and prevents the button from falling out or sticking. What it does:

• Holds a control panel push button in the correct position for reliable operation
• Keeps the button aligned so presses engage the switch or membrane consistently
• Prevents the button from popping out or becoming loose during normal use
• Helps maintain the appliance's finished appearance around the control area

• One button holder

• Turn power to the appliance off before attempting any service to avoid shock or injury
• Remove the control panel or bezel per the manufacturer's instructions to access the holder
• Inspect surrounding buttons and switches for wear; replace damaged components as needed

Replacement handle cap that covers and secures the end of a refrigerator or freezer door handle for a finished appearance and to protect exposed hardware. Restores a clean look and hides fasteners. What it does:

• Covers the exposed end of a door handle to conceal screws and mounting holes.
• Protects handle hardware from dirt and wear.
• Improves the appliance's appearance when an original cap is cracked, broken, or missing.
• Helps prevent snagging on a damaged or loose handle end.

• High-level snap-on or screw-on installation; handle removal may be required for access.
• Use basic hand tools as needed and avoid forcing parts to prevent damage.
• Confirm fit and finish before final installation.

This door stopper mounts at the hinge to limit the refrigerator door's opening angle and provide a positive stop. Replacing a worn stopper helps protect the hinge, prevent over-swing, and promote a smooth, even door seal.

• Limits door opening at the hinge to prevent overextension
• Helps maintain door alignment and consistent gasket contact
• Reduces impact that can loosen hinges or damage the cabinet
• Common symptoms: door swings too far, clunks at full open, doesn't stop smoothly, or shows visible wear at the stop

• Disconnect power and remove items from the door to reduce weight
• Support the door; remove hinge cover and fasteners as needed to access the stopper
• Install the new stopper in the same orientation; tighten hardware securely
• Verify door swing and sealing after reassembly

The Water Tank Assembly is an OEM part for LG refrigerators. It stores and supplies water for the refrigerator's dispenser and ice maker, ensuring a steady and clean water flow for these features.

Causes of a bad water tank assembly can include mineral buildup from hard water, leaks due to cracks or punctures, or contamination from mold or bacteria if the tank is not regularly cleaned. Over time, wear and tear from repeated use can also lead to failure.

Symptoms of a bad water tank assembly include:

• Water dispenser not functioning properly
• Reduced or no ice production
• Leaks or puddles inside the refrigerator
• Unpleasant taste or odor in the water

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

The Water Inlet Valve is an OEM part for LG refrigerators. It controls the flow of water into the refrigerator for the ice maker and water dispenser, ensuring a steady and controlled supply of water.

You should replace the water inlet valve if it becomes clogged, damaged, or fails to function properly. Causes of a bad water inlet valve can include mineral buildup from hard water, electrical malfunctions, or general wear and tear over time.

Symptoms of a bad water inlet valve include:

• The ice maker not producing ice
• The water dispenser not dispensing water
• Leaking water from the valve area
• Unusual noises when the valve is operating

This OEM LG part is also compatible with Sears/Kenmore refrigerators.