Parts for Maytag JDS1450DP0: 06 - Drawer Parts

This genuine-style door handle replaces a worn or broken refrigerator door handle to restore grip and safe door operation. Easy-to-hold design matches factory fit for a clean, finished look. What it does:

• Provides a secure grip for opening and closing the refrigerator door
• Replaces cracked, loose, or missing handles that affect usability
• Restores factory appearance and proper alignment of the door front
• Supports normal door function without requiring body or latch replacement

• Turn off and empty the door area before installation to avoid dropping items
• Fasten with original screws or mounting hardware; confirm orientation before tightening
• If trim or escutcheon is present, remove gently to access mounting screws

This utility drawer assembly replaces a damaged or worn storage drawer found under many ranges and wall ovens, restoring safe, accessible storage for cookware and baking sheets. Durable design keeps items organized and out of the way. What it does:

• Provides a storage drawer that slides out for easy access to pans, baking sheets and oven accessories
• Replaces cracked, bent or broken drawer panels and worn slide surfaces
• Restores smooth drawer operation when the original drawer is sagging or sticking
• Helps prevent items from falling or catching when opening/closing the drawer

• Disconnect power to the appliance before any service; allow unit to cool completely.
• Remove the old drawer by supporting it, releasing any retaining clips or screws, and sliding it out.
• Align the replacement drawer with the guides, engage slides, and secure hardware as required.
• Test drawer operation and make sure it opens and closes smoothly; follow OEM instructions for any trim or fastening steps.

This replacement door seal restores the fridge door's airtight closure to help maintain proper cooling and reduce energy loss. Designed to fit original-style openings, it keeps cold air in and warm air out for reliable food preservation. What it does:

• Creates an airtight seal along the refrigerator door edge to maintain consistent interior temperatures
• Helps prevent frost buildup and reduces strain on the compressor by improving efficiency
• Addresses common symptoms like warm spots near the door, excess frost, or a door that won't close snugly
• Fits into the door channel and compresses when the door is closed to form a tight barrier

• Replacement may require door removal and trim manipulation; follow your model's service instructions
• Inspect the door channel and mounting flange for damage or debris before installing the new seal
• Warm the seal slightly to ease installation and ensure a uniform fit; avoid open flames or excessive heat
• Test the door for a consistent seal after installation and make any hinge/strike adjustments if needed

This drawer panel is the front trim piece for a refrigerator/freezer drawer that restores the drawer's appearance and helps the drawer align and operate smoothly. Ideal for replacing cracked, dented, or worn front panels. What it does:

• Replaces a damaged or cracked drawer front to restore cosmetic appearance
• Provides correct fit and alignment so the drawer opens and closes properly
• Helps maintain the drawer's mounting points and attachment clips
• Reduces air gaps caused by warped or broken panels that can affect compartment performance

• Remove drawer contents and fully extract the drawer before starting
• Use basic hand tools to remove mounting screws or clips; support the drawer front while detaching
• Handle edges carefully to avoid cuts; wear gloves if metal or sharp edges are present
• Follow OEM diagrams/instructions for reattachment and clip alignment

This replacement drawer slide restores smooth, stable movement for a refrigerator/freezer drawer. It helps the drawer open and close evenly and prevents sticking or sagging so stored items remain accessible and secure. What it does:

• Guides the drawer along its track for reliable, linear motion
• Supports drawer weight to prevent sagging or uneven travel
• Reduces sticking, jamming, or rough movement when opening/closing
• Helps drawer stay aligned and seat properly in the cabinet

• One drawer slide

• Designed to mount to the drawer/cabinet; verify left/right position before installation
• Use existing mounting hardware when possible; replace stripped or damaged screws
• Turn power off and remove food from the drawer area if working near electrical components or lights

This replacement drawer slide restores smooth, stable movement for a freezer/refrigerator drawer. It helps the drawer open and close properly and reduces sticking or misalignment for reliable daily use. What it does:

• Replaces a worn or damaged drawer slide to restore proper tracking
• Reduces sticking, grinding, and uneven drawer movement
• Helps prevent drawer sagging and keeps contents secure
• Works with the drawer's existing rollers and mounting points

• One drawer slide assembly

• Disconnect power to the appliance before any service on electrical components
• Remove the drawer and existing slide(s) to access mounting screws; reinstall using original hardware unless replacements are provided
• Confirm left/right orientation and fit before tightening fasteners

This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.

• Fastens brackets, panels, trim, or components to the appliance chassis
• Helps correct loose or missing hardware after vibration or service
• Replaces stripped, rusted, or broken screws
• Can reduce rattling noises or misaligned parts caused by missing fasteners

• Disconnect power; for gas appliances, also shut off the gas supply
• Support the part being fastened; start threads by hand to avoid cross-threading
• Use the correct driver size; tighten snugly without overtightening
• Replace hardware with the exact part number to ensure proper fit

This replacement screw secures appliance components and panels. Replacing worn or missing hardware restores a tight, rattle-free fit and helps keep assemblies properly aligned for reliable performance.

• Fastens panels, brackets, or covers to the appliance frame or mating parts
• Helps maintain proper alignment and reduces vibration and noise
• Replaces missing, stripped, or corroded screws
• Common signs to replace: loose or rattling panels, misaligned parts, damaged screw head or threads

• Disconnect power; also shut off water or gas to the appliance if applicable
• Compare to the original to ensure thread and length match before installing
• Start threads by hand to avoid cross-threading; tighten only until snug
• If the mating clip/insert is stripped, replace that hardware as well

This utility drawer is the replacement storage bin that keeps small food items organized and contained inside the refrigerator. It restores a secure, easy-to-access compartment for deli items, produce, or packaged foods. What it does:

• Replaces a cracked, broken, or missing utility/drawer bin so items no longer fall through or get stuck
• Slides into the refrigerator housing to provide a low-profile storage area for small or loose items
• Helps maintain organization and prevents spills from spreading to other shelves
• Compatible with refrigerator interior rails and support brackets to ensure smooth operation

• One replacement utility drawer

• Remove food and empty the drawer before starting; wear gloves to avoid sharp edges
• Slide the drawer into the existing tracks until it snaps or seats into place; some models use simple lift-and-place engagement
• If rails or brackets are damaged, inspect and replace them separately—this listing includes only the drawer

This oven temperature sensor measures internal oven temperature so the control can maintain accurate cooking heat. Replacing a failed sensor restores proper temperature regulation and consistent baking and roasting results. What it does:

• Senses oven cavity temperature and sends a signal to the control board
• Helps the oven reach and maintain set temperatures for consistent cooking
• Common symptom: oven not heating to set temperature or runs too hot/too cold
• May also cause oven error codes or cycling on and off frequently

• One oven temperature sensor probe

• Disconnect power at the breaker before removing or installing the sensor
• Handle the probe gently; avoid kinking or crushing the sensing element or damaging the connector
• Route wires and secure mounting so the sensor sits in its original position inside the oven cavity

This oven bake element replaces a failed or damaged heating element to restore even baking heat. It mounts inside the oven cavity and provides the high-temperature heat source used during bake cycles. What it does:

• Heats the oven cavity during bake cycles so the oven reaches and maintains baking temperatures
• Common symptom fix: no heat or oven not reaching set temperature
• Common symptom fix: element is visibly broken, burnt, or arcing
• Works with the oven's internal controls and thermostats to produce consistent bake performance

• One bake (oven) heating element

• Disconnect power to the appliance before starting work to avoid electric shock
• Allow the oven to cool completely before handling the old element
• Support the element while removing mounting screws and disconnecting wires; note wire location for reassembly
• After installation, restore power and test the oven on a low bake setting to confirm correct operation

This spacer is a small mounting component that helps keep internal appliance parts correctly positioned for reliable, quiet operation. Use it to restore proper spacing and reduce rubbing or vibration between parts. What it does:

• Provides correct spacing between components to maintain alignment and prevent contact
• Helps reduce noise and vibration caused by misaligned parts
• Supports stable assembly of panels, brackets, or housings where used
• Commonly replaced when worn, cracked, or missing

• Disconnect power (and water, if applicable) before beginning any repair
• Installation typically requires removing an access panel and replacing the old spacer with the new one
• Use basic hand tools; avoid forcing parts into position to prevent damage

The Thermal Fuse is an OEM replacement part for Whirlpool ovens. This safety device is designed to prevent the oven from overheating by cutting off electrical power if the internal temperature exceeds a safe level.

The thermal fuse can fail due to normal wear and tear, prolonged exposure to high temperatures, or electrical surges. Accumulation of grease and debris around the fuse can also cause it to malfunction.

Symptoms of a bad thermal fuse include:

• The oven not heating up
• The oven shutting off during use
• No power to the oven
• Error codes related to temperature control

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is a standard oven rack that supports cookware and pans inside the oven, restoring a stable cooking surface for baking, roasting, and broiling. What it does

• Provides a durable shelf for pots, pans and baking sheets
• Slides into the oven's rack supports to position cookware at the correct cooking height
• Replaces bent, warped, or missing racks that cause uneven cooking or tipping
• Compatible with typical slide-in and drop-in rack support systems

• One oven rack

• Install by sliding the rack into the oven's existing rack supports until fully seated
• Make sure the rack is oriented correctly (top/bottom) per your oven's rack guides
• Always let the oven cool before removing or installing the rack and use oven mitts when handling hot racks
• Clean with non-abrasive cleaners; avoid steel wool or harsh chemicals that can damage the finish