Parts for Whirlpool WEC310S0FB1: Drawer Parts

The Drawer Panel is an OEM part for Whirlpool ranges. It is responsible for providing a sleek and finished look to the front of the range drawer, enhancing the overall aesthetic appeal of your kitchen.

A bad drawer panel can occur due to accidental damage, wear and tear, or improper handling. If you notice symptoms such as cracks, dents, or discoloration on the front panel, it may be time to replace it.

Symptoms of a bad drawer front panel include:

• Cracks, dents, or scratches on the front panel
• Discoloration or fading of the panel
• Loose or misaligned fit

Restore your range by replacing the damaged or worn-out drawer front panel with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Utility drawer assembly replaces a damaged or missing storage drawer, restoring tidy storage and proper sliding action in the appliance. Durable replacement designed to match the original fit and function. What it does:

• Provides a dedicated storage compartment for small items and accessories inside the appliance
• Restores proper drawer alignment and smooth sliding operation
• Replaces cracked, broken or missing drawers and mounting tabs that allow the drawer to fall out or not seat correctly
• Helps prevent items from shifting or falling into the appliance interior

• Always disconnect power to the appliance before beginning service and follow basic safety precautions
• Removal typically involves sliding out the old drawer and lifting or releasing retention tabs; installation is the reverse
• Inspect mounting rails/tabs for damage during replacement; damaged hardware may require separate parts

This mounting bracket secures appliance components to the cabinet or chassis, restoring proper alignment and reducing movement. It's a direct-fit structural support used where panels or assemblies need a stable attachment point. What it does:

• Secures panels, trim or internal assemblies to the appliance cabinet to prevent shifting or sagging
• Restores proper alignment to reduce vibration, rattling or scraping noises
• Helps maintain door and panel fit for correct operation and appearance
• Used when a broken, bent or missing bracket causes loose or misaligned parts

• Disconnect power and water before starting any repair
• Verify bracket orientation and location against the appliance before tightening
• Use original mounting hardware when possible; inspect screws or clips and replace if worn

This mounting bracket secures internal components to the appliance cabinet, helping keep parts aligned and stable for reliable operation. It replaces a worn or broken bracket to stop movement and reduce noise. What it does:

• Secures panels, assemblies, or components to the cabinet to prevent shifting
• Restores proper alignment of attached parts for correct operation
• Helps reduce vibration, rattling, and intermittent contact caused by a loose bracket
• Prevents sagging or misalignment that can interfere with doors, drawers, or moving parts

• One mounting bracket

• Disconnect power (unplug or shut off breaker) before starting any repair
• Access may require removing exterior panels or covers; keep track of fasteners
• Use common hand tools (screwdriver, nut driver) and tighten hardware securely
• Replace only with the exact part number for a correct fit and function

Color: Black.

Color: White.

This replacement drawer panel restores the finished front of your appliance drawer so it looks and functions like new. It replaces a cracked, dented, or scratched front and helps the drawer seal and slide properly. What it does:

• Replaces a damaged or cosmetically worn drawer front to restore appearance
• Provides a proper mounting surface so the drawer closes and opens smoothly
• Helps maintain drawer alignment and fit against surrounding trim
• Matches original fit and attachment points for an easy swap when hardware is transferred

• Disconnect power or follow the appliance safety shutoff procedure before starting
• Remove the drawer and transfer any original mounting clips, brackets, or screws to the new panel
• Handle edges carefully to avoid damage; use appropriate tools and support the drawer during reassembly
• Refer to your model's service instructions for exact disassembly and reassembly steps

This drawer panel replaces a damaged or worn front panel on compatible Whirlpool refrigerator drawers to restore appearance and proper closure. It provides a like-for-like cosmetic and structural replacement for cracked, dented, or broken drawer fronts. What it does:

• Replaces a cracked, dented or broken drawer front to restore a clean appearance
• Helps the drawer seal and slide properly by restoring the front face and mounting surface
• Eliminates sharp edges and cosmetic damage that can catch on clothing or food packaging
• Matches the OEM shape so factory hardware and trim align correctly

• One replacement drawer panel

• Remove drawer and contents before starting; handle panel carefully to avoid damage
• Use original mounting screws and hardware; confirm any trim or clips are present before final assembly
• Wear gloves to protect hands from sharp edges and to avoid fingerprints on finished surfaces

The Drawer Glide Kit is an OEM part for Whirlpool ovens and ranges. It consists of glides that attach to the sides of the storage drawer, allowing for effortless opening and closing. These glides are made from durable materials to withstand regular use and provide reliable support. The kit also includes any necessary mounting hardware for easy installation.

Causes of a faulty drawer glide kit can include wear and tear over time, damage due to excessive weight or force, or broken or worn-out glides.

Symptoms of a bad drawer glide kit may include:

• Storage drawer sticking or not sliding smoothly
• Uneven movement or misalignment
• The drawer not closing or staying securely in place

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.

• Fastens brackets, panels, trim, or components to the appliance chassis
• Helps correct loose or missing hardware after vibration or service
• Replaces stripped, rusted, or broken screws
• Can reduce rattling noises or misaligned parts caused by missing fasteners

• Disconnect power; for gas appliances, also shut off the gas supply
• Support the part being fastened; start threads by hand to avoid cross-threading
• Use the correct driver size; tighten snugly without overtightening
• Replace hardware with the exact part number to ensure proper fit