Parts for Husqvarna 917374422: Drive Control / Gear Case / Wheels Parts

This control cable is a genuine Husqvarna part, sold individually. This control cable can be used as a replacement part in a lawnmower. The purpose of the control cable in a lawnmower is to allow the operator to propel the appliance forward or stop the appliance in its tracks during its typical use; this occurs by engaging and disengaging the control cable, respectively.The control cable can be frayed, ripped, torn, punctured, dented, warped, or eroded, and if this occurs to the point of reduced functionality, the control cable should be removed and replaced by this genuine OEM replacement part as soon as possible. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This control cable is compatible with the following outdoor appliance brands: Husqvarna.

This authentic OEM replacement wheel assembly includes both the rubber tire and plastic wheel. Although it may seem simple, the wheel is a crucial component of a lawn mower that holds the blade up off of the ground and allows the operator to easily push the mower forward. Lawn mower wheels are generally made of plastic, and although the plastic is durable, it can become brittle over time. This is especially true if the lawn mower is used over rough terrain. Replacing a broken wheel is one of the easier repairs on a mower and will only require a screwdriver or socket wrench. Simply remove the old wheel, making sure not to lose the washer and bolt, and attach the new wheel. This part is compatible with most Husqvarna lawn mowers and is sourced from its original manufacturer. This part ships individually. It does not include any of the bolts or washers required to attach the wheel, so it is important that you have the required bolts before making the repair or purchase them separately.

This pinion gear is an essential part of the steering assembly as it translates the rotation of the steering shaft into vertical motion. The pinion gear travels along the drivetrain, which pushes the wheels either forward or backward, causing the mower to turn. Without a functioning pinion gear, the mower will no longer steer. A pinion gear's teeth can slowly wear away through repeated use, causing it to begin slipping. When this happens, the operator will no longer be able to turn their mower as effectively or possibly not at all. This can be dangerous for the operator and they should stop mowing immediately. With most push lawn mowers, the pinion gear is located inside the wheel well. To replace it, simply remove the wheel and mounting washer, pop off the retaining ring, and remove the pinion. Reassemble and test the forward motion of the wheel. This genuine replacement OEM part is compatible with a number of lawn mowers from Poulan, Jonsered, Husqvarna, and Weed Eater. It comes sourced from the original manufacturer and does not include any additional hardware.

A lawnmower, weed whacker, or trimmer is exposed to a lot of flying debris, and this puts many parts at risk of becoming clogged with grass and other materials. This cover is designed to prevent any debris from reaching the interior of the wheel or the axle. If a large amount of grass or clippings accumulate inside of the assembly, the machine will be almost impossible to move forward - whether self-propelled or manually operated. This cover prevents that from occurring and simply kicks it back in the direction it came. It does take a lot of wear and tear. Installing it is extremely easy and requires little more than a wrench. Even if the cover is aged, or broken, it will remove easily and take minutes to replace. Expect to replace this at least once over the average lifespan of a trimmer. This works with Husqvarna, Poulan, Craftsman, Ariens, Weed Eater, Jonsered, and Murray makes and models. It is a genuine OEM part sold individually.

This pawl drive is a genuine Husqvarna part, sold individually. This pawl drive can be used as a replacement part in lawn mowers and chainsaws. This pawl drive is made out of durable metal. A pawl drive might have to be replaced within the standard lifespan of a lawn mower or a chainsaw. A pawl drive could suffer damage as a result of general long-term usage or from a direct collision with a falling object or a hard surface; this damage could come in the form of puncturing, erosion to the metal material, or warping the part beyond repair. If this is the case, the pawl drive should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This Pawl drive is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, Weed Eater, and Ariens.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This part is a lower transmission spring. This lower transmission spring is an integral component needed for the self-propel or automatic drive function on outdoor power equipment. It is made of durable metal.A new lower transmission spring may be needed if the self-propel function is not working properly on a lawnmower or snow thrower. Another reason that a new lower transmission spring will be needed is if it is physically broken or damaged in any way. Sometimes the lower transmission spring needs to be replaced simply due to normal wear and tear after a long period of time and use. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This lower transmission screw is used on lawnmowers and snowthrowers manufactured by Husqvarna, Poulan, Weed Eater, and Jonsered.