Parts for Poulan 96144000201: Drive Control / Gear Case / Wheels Parts

This part is a replacement drive control cable. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a snapped, worn, or faulty drive cable in a variety of lawnmower models. The drive control cable enables the equipment user to have proper control over the lawnmower and is essential for maneuverability. Cables can become worn or stretched or may snap with regular use. If this occurs, the lawnmower may not be drivable, and this part must be replaced. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this drive control cable, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this drive control cable is suitable for use on several different models of lawnmowers manufactured by Husqvarna and Poulan. This is a genuine part made of high-quality, durable materials and is sold individually.

This pinion gear is an essential part of the steering assembly as it translates the rotation of the steering shaft into vertical motion. The pinion gear travels along the drivetrain, which pushes the wheels either forward or backward, causing the mower to turn. Without a functioning pinion gear, the mower will no longer steer. A pinion gear's teeth can slowly wear away through repeated use, causing it to begin slipping. When this happens, the operator will no longer be able to turn their mower as effectively or possibly not at all. This can be dangerous for the operator and they should stop mowing immediately. With most push lawn mowers, the pinion gear is located inside the wheel well. To replace it, simply remove the wheel and mounting washer, pop off the retaining ring, and remove the pinion. Reassemble and test the forward motion of the wheel. This genuine replacement OEM part is compatible with a number of lawn mowers from Poulan, Jonsered, Husqvarna, and Weed Eater. It comes sourced from the original manufacturer and does not include any additional hardware.

A lawnmower, weed whacker, or trimmer is exposed to a lot of flying debris, and this puts many parts at risk of becoming clogged with grass and other materials. This cover is designed to prevent any debris from reaching the interior of the wheel or the axle. If a large amount of grass or clippings accumulate inside of the assembly, the machine will be almost impossible to move forward - whether self-propelled or manually operated. This cover prevents that from occurring and simply kicks it back in the direction it came. It does take a lot of wear and tear. Installing it is extremely easy and requires little more than a wrench. Even if the cover is aged, or broken, it will remove easily and take minutes to replace. Expect to replace this at least once over the average lifespan of a trimmer. This works with Husqvarna, Poulan, Craftsman, Ariens, Weed Eater, Jonsered, and Murray makes and models. It is a genuine OEM part sold individually.

This pawl drive is a genuine Husqvarna part, sold individually. This pawl drive can be used as a replacement part in lawn mowers and chainsaws. This pawl drive is made out of durable metal. A pawl drive might have to be replaced within the standard lifespan of a lawn mower or a chainsaw. A pawl drive could suffer damage as a result of general long-term usage or from a direct collision with a falling object or a hard surface; this damage could come in the form of puncturing, erosion to the metal material, or warping the part beyond repair. If this is the case, the pawl drive should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This Pawl drive is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Craftsman, Weed Eater, and Ariens.

This genuine Husqvarna selector knob affixes to the selector spring as part of a mechanism that lowers and raises the handle of the lawn mower for flexible usage.The selector knob might have to be replaced in the event that it suffers damage that impedes its ability to lower and raise the handles of the lawn mower. This kind of damage can occur as a result of general wear and tear from long-term usage, exposure to the elements, or a direct collision that warps the selector knob beyond repair. If any of this form of damage occurs and prevents the adjustability of the handles, the selector knob should be replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This selector knob is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This part is a replacement transmission gear. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a defective or broken transmission gear in lawn mowers.The transmission gear is what attaches to the equipment's drive shaft to help turn the wheels. This part is critical to proper equipment functionality and thus will require replacement if faulty in any way. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this transmission gear, the appropriate owner's manual and equipment diagrams should be referred to. This transmission gear is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with lawn mower models that have been manufactured by Husqvarna, Poulan, and other brands.