Parts for Poulan BC2126: Drive Shaft / Throttle Housing Parts

This replacement screw is OEM and has been directly sourced from the manufacturer. The screw is used in many machines, including lawnmowers, tractors, tillers, and other lawn and garden equipment.These screws will be subject to normal wear like any other part. They should be inspected every year before using the equipment for rust or to see if any have fallen out or broken off. If any extra motion from the deck or the engine is noticeable, check the screws to ensure they don't need to be tightened. Failure to do so can cause damage to the mower and cause other parts to need replacement. Before checking the screws, make sure the mower has cooled off enough to touch. Letting the mower cool for a couple of hours is best to avoid burns. The screws can be tightened with a screwdriver. The screw is a genuine OEM replacement part. It is designed to be used with Husqvarna, Craftsman, Troy-Bilt, Cub Cadet, Poulan, Mcculloch, and Jonsered machines.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

This is a screw used with many kinds of lawn and garden equipment, such as leaf blowers and string trimmers. The screw can be used to attach components together on its own or with the use of a nut. When using a nut with the screw, it should have the same threading and finish as the screw. Wear and tear or breakage can happen with screws over time and will lead to the need to replace them.Corrosion, hot temperature, and stress may all create weakness in a screw. This can cause it to become brittle, loose, or even broken outright. A visual inspection of the screw will give an indication of whether it needs to be replaced with a new one. If a replacement is required, a screwdriver can be used to remove the screw before placing a new one in the same location.This screw can be used with string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Paramount, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman. It is sold as an individual part. The screw is a genuine OEM replacement part sourced directly from the manufacturer.

This is a replacement spring that is found in select trimmers, blowers, and brush cutters. The spring is a small component that is made of durable metal, but it can stretch and become worn over time. This can lead to a need for replacement. This particular spring is designed to provide the correct tension for the trigger of the unit. Without a functional spring, the trigger will not activate and the appliance will be rendered useless until a replacement is made. This genuine spring is manufactured to exact standards by Husqvarna, and it can be used in compatible machines from the brand, as well as models from Jonsered. It is sold as an individual part and is made of durable metal, although it is a bit lightweight in its design. Replacing this spring will require a screwdriver and pliers, and should only take a few minutes. Wear gloves and allow the machine to cool completely before attempting any repairs. Springs are delicate and under tension, so use care when performing replacements on parts like this.

This is a shield bracket for use with line trimmers. The bracket is used to help hold and support the debris shield to the trimmer shaft. If this piece is broken or not working properly, it means that the deflector will not be attached correctly, and the debris will not go where it should. Owners who find that the shield bracket has an issue will want to replace it as soon as possible.The shield bracket is made from durable metal, but it could still become damaged or corroded over time. If there is damage, the owners can make the simple replacement on their own. It is important that they remove the spark plug wire before making the installation, though. They should also wear gloves to keep their hands safe.The shield bracket is compatible with select models of line trimmers from Husqvarna, Weed Eater, Poulan, and Jonsered. The piece is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This is a gearbox assembly that is intended for use with trimmers and brush cutters. A gearbox assembly is a device that transfers power from one component to another. It increases torque while reducing speed. This gearbox assembly is manufactured out of a high-quality metal material.A new gearbox may be needed if the unit is making any strange grinding noises, if there is a burning smell, if the trimmer spins erratically, or if it does not spin at all. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines. Never perform care and maintenance on an outdoor power equipment machine that is powered on.This gearbox assembly is a genuine OEM Husqvarna part. It is sold individually. This particular gearbox assembly is compatible with trimmers and brushcutters that are manufactured by Husqvarna, Craftsman, and Poulan.

This trimmer head holds the line that is used to trim foliage and hedges in the yard. The trimmer head is made of durable plastic and helps control how much line is being used when the equipment is running. It can become damaged during use and will need to be replaced.Wear and tear can happen with a trimmer head. It's also possible to bang the head into something else and notice that it has become damaged or broken. If any of these situations occur, replacing the head is the only option. A flathead screwdriver can be used to loosen the head so it can be removed. Take the old head off of the nut on the bottom of the shaft to loosen it. Afterward, place the new trimmer head onto the shaft and tighten it before use.This is an authentic OEM replacement part that is sourced directly from the manufacturer. The trimmer head is sold individually. It is made to be used with string trimmers manufactured by Poulan and Husqvarna.