Parts for Poulan BC2126: Cylinder / Fuel Tank / Starter Parts

An air filter blocks tiny particles from entering and harming the engine. Over time, it will accumulate dirt and dust. If it is too worn-down, it will no longer be an effective barrier. Small debris may make its way into the engine and cause clogging. It can impede proper airflow. Replacing an air filter is a relatively quick and straightforward maintenance project. Let the device cool first. Then, loosen or remove the air filter cover. Take out the failed filter and install the replacement. Make sure to align it to the housing. Return the air filter cover to its original position. This part will fit several trimmer models from brands like Husqvarna, Poulan, and Craftsman. It has the same shape and cut as the trimmer’s original filter. This replacement does not come with the airbox cover. One genuine Husqvarna airbox filter per order is included, sold individually.

This nut is most commonly used with gas-powered chainsaws. The nut is used with a bolt, which is sold separately, to secure the carburetor and air filter together. It is a fastener that comes with a threaded hole. The bolt helps fight against rotation and vibrations that can pull the nut loose.Nuts can experience wear and tear and may become damaged or broken over time. If the nut has broken in half, has significant damage, or has been exposed to corrosive materials, it will need to be replaced. A wrench can be used to remove the damaged nut. Once that nut is removed, the new replacement part can be installed. Make sure to use work gloves and tighten the nut before using the lawn and garden equipment in the future.This is a genuine replacement part that is directly sourced from the manufacturer. It can be used with a variety of chainsaws, string trimmers, edgers, hedge trimmers, leaf blowers, and brush cutters created by Poulan, Poulan Pro, Craftsman, and Husqvarna. It is sold as an individual component. This part is sold individually.

This high quality choke lever is used on string trimmers and edgers from multiple manufacturers. The plastic choke lever actuates the choke valve which creates a limit to the amount of air that can enter the engine when the equipment is cold started. If the choke lever has been damaged or is broken, it may create problems with starting the tool. If this is the case, the choke lever will need to be replaced.This is a simple replacement project that requires only a screwdriver and a pair of work gloves. Before starting, make sure the tool is turned off and the spark plug wire has been removed. Place the tool on a flat surface and take out the choke lever. The broken choke lever can be removed using the screwdriver. The new replacement choke lever can be installed before tightening the screws and using the equipment again.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The choke lever is made for use with edgers and string trimmers manufactured by Craftsman, Husqvarna, and Poulan.

This part is a replacement carburetor adapter. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a defective or broken carburetor adapter in various models of line trimmers.The carburetor adapter is found between the engine cylinder and the carburetor itself. It's critical for proper equipment functionality and thus will need to be replaced if rendered faulty in any way. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this carburetor adapter, the appropriate owner's manual and equipment diagrams should be referred to. This carburetor adapter is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with line trimmer models that have been manufactured by Husqvarna, Poulan, and other brands.

This rewind spring is a genuine Husqvarna part, sold individually. This rewind spring can be used as a replacement part in a string trimmer or an edger. The rewind spring maintains the placement of the pulley in the pull start assembly, allowing the rope to power the appliance.The rewind spring could be dented, punctured, warped, eroded, cracked, chipped, or otherwise damaged to the point of reduced functionality or negated functionality, in which case the rewind spring should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This rewind spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.

Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.

Symptoms of a bad fuel pick up assembly include:

• Engine not starting or hard to start
• Engine stalling or running inconsistently
• Reduced power or performance
•  Visible damage or clogging in the fuel line

This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.

This fuel line kit is a part used in gasoline-powered edgers and trimmers. It delivers fuel from the gasoline tank to the carburetor where it is mixed with air that has come through the air filter. The mix flows into the combustion chamber where it is ignited to turn the driveshaft of the tool. As an added feature, this fuel line kit also has another line to feed excess fuel back into the gas tank. Extra, unneeded fuel sometimes flows into the carburetor when the engine is cold and users are trying to prime the engine. Although durable and intended to last, this fuel line is subject to weathering over the course of several years, especially when subjected to temperature extremes. A broken or fractured fuel line will leak gasoline, resulting in an extremely dangerous situation. Leaking fuel lines must be replaced immediately. This component is easily located, situated between the fuel tank and the carburetor. It is easily disconnected and replaced. When choosing a new fuel line kit, make sure to choose a part like this one, which is a genuine OEM certified part. This fuel line kit is compatible with Jonsered and Husqvarna equipment.

This replacement screw is OEM and has been directly sourced from the manufacturer. The screw is used in many machines, including lawnmowers, tractors, tillers, and other lawn and garden equipment.These screws will be subject to normal wear like any other part. They should be inspected every year before using the equipment for rust or to see if any have fallen out or broken off. If any extra motion from the deck or the engine is noticeable, check the screws to ensure they don't need to be tightened. Failure to do so can cause damage to the mower and cause other parts to need replacement. Before checking the screws, make sure the mower has cooled off enough to touch. Letting the mower cool for a couple of hours is best to avoid burns. The screws can be tightened with a screwdriver. The screw is a genuine OEM replacement part. It is designed to be used with Husqvarna, Craftsman, Troy-Bilt, Cub Cadet, Poulan, Mcculloch, and Jonsered machines.

This part is a replacement screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a defective, misplaced, or stripped screw in outdoor power equipment. Screws are a standard piece of equipment hardware with different uses. They help to secure parts of the equipment together properly. If a screw becomes corroded, stripped, misplaced, or is otherwise defective, then it should be replaced. Wear work gloves and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. This screw is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment models that have been manufactured by MTD, Craftsman, and other brands.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.

Combustion engines are quite loud by nature, and their sound and emissions are toned down through the use of a muffler system. In small engines, the muffler often attaches directly to the cylinder to capture the gases and reduce noise. Should that connection weaken or loosen, a replacement bolt may need to be installed to ensure a tight seal and optimal engine performance. This replacement muffler bolt is meant to be installed on edgers, blowers, trimmers and pruners from brands like Poulan, Jonesred, Weed Eater and Husqvarna. This is an OEM replacement part and is going to be responsible for fastening the machine's muffler to the cylinder. It will require the proper hex key to install properly and is considered an easy repair frequently required on many small machines.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

This genuine Husqvarna muffler for string trimmers and edgers is a necessary component for reducing noise from the equipment. While these machines might work without mufflers, they would be much louder. The muffler also prevents sparks from coming through and starting fires. This is particularly important when working with grass, leaves, and other dry debris.If the muffler is clogged, cracked, or broken, the engine on the equipment might not perform as it should. Clogs can occur over time due to the use and buildup of debris. Cracks and breakage are a normal part of wear and tear and would be easy to find during routine maintenance. Inspect for rust, cracks, breaks, and damage.Removal and replacement is a simple process using a screwdriver to remove the engine cover. Set the cover aside. Next, remove the bolts holding the old muffler in place. Remove the old muffler and discard. Wipe down the area while the muffler is off the equipment. This will prevent debris from interfering with the installation. Install the new muffler with the bolts included. Tighten the bolts but do not overtighten. Reinstall the engine cover and tighten the bolts. This muffler is compatible with Husqvarna trimmers. It is sold individually and comes with bolts.

This replacement part is a flywheel. This is a genuine replacement part made by Husqvarna. This part is a heavy wheel that is attached to the motor in the engine. The flywheel regulates the speed of the machine and stores excess energy during use. A new flywheel might be needed if the current one is visibly damaged or no longer spinning. If the engine seems to be working intermittently, it might be a problem with the flywheel. Be sure the engine is powered off during this repair as the spinning mechanisms can cause injury if precautions are not taken. Refer to the owner's manual for more information about how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This wrist pin retainer is an essential component that is used to secure the piston pin in many types of handheld lawn and garden equipment. The pin is made of durable metal, but if it is missing or has become damaged, the part will need to be replaced. A wrench set, screwdriver, and pliers will be needed to make the replacement. To replace the wrist pin retainer, get access to the piston and then take off any keeper rings included. Use tools to tap on the wrist pin retainer to make it come loose and take it out of the equipment. The replacement can be inserted into the same place and the equipment will need to be reassembled.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The wrist pin retainer is designed to be used in trash compactors, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, pole pruners, and carpet cleaners manufactured by Turf King, Craftsman, Paramount, Husqvarna, Broan, Weed Eater, Poulan, and Poulan Pro. The part is sold individually.

A combustion engine will create a lot of pressure by igniting fuel and air with a spark. It features pistons beneath the valves and the cylinder block. Between these areas are the piston rings that have many purposes that include keeping gas compression between the piston and the wall of the cylinder, keeping a layer of lubrication on the inside of the engine, allowing adequate heat transfer, and supporting the piston inside the cylinder. This replacement piston ring is designed for use in a long list of edgers, trimmers, and blowers. It is compatible with Husqvarna, Poulan, and Craftsman machines. This is an OEM replacement part that will require a complex set of steps to install properly. It will require the use of torque wrenches, plug wrenches, pliers, screwdrivers, a mallet, and more to do the repair. It ships individually.