Parts for Whirlpool WGTLV27HW0: Dryer / Washer Control Panel Parts

Note: 5  Position Switch
 

Note: 2-Position Switch

The Push to Start Switch is an OEM replacement part for Whirlpool dryers. This switch initiates the dryer's operation when pressed, signaling the motor to start turning and the heating element to activate. It sets the entire drying cycle in motion, ensuring your clothes are dried according to the selected settings.

Symptoms of a bad Push to Start Switch include:

• The dryer not starting when the button is pressed
• Intermittent starting issues, where the dryer sometimes starts and sometimes doesn’t
• The need to press the button multiple times to initiate the drying cycle
• Unusual noises when the button is pressed

Causes for a malfunctioning Push to Start Switch can include electrical issues, such as faulty wiring or connections, wear and tear from frequent use, or mechanical problems that prevent the switch from activating the motor and heating element.

This OEM part is also compatible with Maytag, KitchenAid, and Kenmore models.

The Knob Kit is an OEM replacement part for Whirlpool washing machines and dryers. Including a set of premium knobs color-matched to the appliance controls, this kit restores complete interfaces whenever old or damaged buttons need replacing. The kit includes 1 timer knob and 3 control knobs.

Causes for replacement involve normal wear from repeated touching during cycles as well as impact damage from falls or button presses gone awry over many years of service.

Symptoms necessitating a new knob kit include:

• Cracked, broken or missing buttons impeding normal operations
• Loosened knobs slipping out of holes or wearing partial turns
• Discolored faded markings obscuring switch positions

This OEM Whirlpool part is also compatible with Maytag, Amana, and other major brands.

The Knob Kit is an OEM replacement part for Whirlpool washing machines and dryers. Including a set of premium knobs color-matched to the appliance controls, this kit restores complete interfaces whenever old or damaged buttons need replacing. The kit includes 1 timer knob and 3 control knobs.

Causes for replacement involve normal wear from repeated touching during cycles as well as impact damage from falls or button presses gone awry over many years of service.

Symptoms necessitating a new knob kit include:

• Cracked, broken or missing buttons impeding normal operations
• Loosened knobs slipping out of holes or wearing partial turns
• Discolored faded markings obscuring switch positions

This OEM Whirlpool part is also compatible with Maytag, Amana, and other major brands.

The Clip is an OEM part for Whirlpool dryers. This part secures the control knob to the dryer’s control panel, ensuring it remains firmly attached and functions correctly. The clip helps provide stability and precise control over the dryer settings.

Causes of a bad clip can include regular wear and tear, accidental damage during use, or stress from frequent adjustments.

Symptoms of a bad clip include:

• Knob becoming loose or falling off
• Difficulty turning the knob to adjust settings
• Knob not staying securely in place
• Knob wobbling or feeling unstable

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Washer Control Board is an OEM part compatible with Whirlpool washing machines. As the brain of the washer, it controls all cycle functions, temperature selection, load balancing, and spin speed. The board communicates user inputs to valves, heaters, motors, and displays. 

Symptoms of a faulty control board include:

• Cycles not progressing or getting "stuck" at certain points
• Inability to turn the washer on, select options, or start cycles
• Random control behaviors and error codes displayed
• Repetitive clicking noise coming from the control area

Causes are often related to moisture damage, normal wear over time, or defective electronic components on the board itself. 

This OEM replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models as well. 

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Timer is an OEM part for Whirlpool dryers, designed to control the duration of various drying cycles. This part ensures your dryer operates efficiently, cycling through its programmed times for drying, cooling, and tumbling. 

Common causes of a malfunctioning dryer timer include corrosion or wear of electrical contacts, mechanical failure from stuck gears, and electrical shorts impacting circuitry.

Symptoms of a failing Timer include:

• The dryer not starting or stopping at the correct time.
• The dryer skipping certain parts of a cycle or not advancing through cycles at all.
• Inconsistent drying times, leading to clothes being either too damp or overly dry.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This hinge bracket secures a refrigerator door hinge to the cabinet, restoring proper door alignment and support so the door seals and closes reliably. Designed to replace a worn, bent, or broken hinge mounting bracket. What it does:

• Provides a stable mounting point for the door hinge assembly to prevent sagging or drooping
• Restores correct door alignment to improve sealing and reduce cold air loss
• Stops excess movement or rattling at the hinge area
• Helps eliminate door-binding or uneven gaps that keep the door from closing fully

• Unplug the appliance and remove food/items from the door before starting
• Support the door while removing/installing the bracket to avoid damage or injury
• Reuse or replace fasteners as required; tighten securely but avoid over-torquing
• After installation, check door alignment and gasket seal; make minor adjustments as needed

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw secures appliance components in their intended positions. Swapping a missing, stripped, or corroded screw helps stop rattles and keeps panels, brackets, and internal parts tight for reliable operation.

• Fastens panels, brackets, or internal parts where specified by your model
• Helps reduce vibration and rattling caused by loose hardware
• Restores alignment when an original screw is missing or damaged
• Replace if threads are stripped, head is rounded, or corrosion is present

• Disconnect power and shut off water or gas before service
• Verify the exact location using your model's parts diagram/IPL
• Start threads by hand to avoid cross-threading; tighten only until snug
• Reuse any original washers, clips, or spacers if present

This control panel is the appliance's user interface that houses the touchpads, buttons and display needed to select cycles and options. Replacing a faulty panel restores control and readable status feedback. What it does

• Provides the main touchpad/buttons and display used to start cycles and select settings
• Sends user inputs to the range/oven control board so commands are executed
• Restores readable status information when the original panel is blank or unreadable
• Common symptom fixes: unresponsive buttons, missing/blank display, intermittent control behavior

• Disconnect power to the appliance before starting any service to avoid shock
• Handle the panel and display lens gently to prevent damage to buttons or ribbon connectors
• Remove the console/upper trim as required to access connectors; keep fasteners for reassembly
• If issues persist after replacement, check wiring harness connections and the main control board

This part is a moisture sensor control board that is used on dryer units. This component monitors the moisture levels within the dryer and adjusts the dry time during the automatic drying cycle. A new moisture sensor control board will be needed if the time is not advancing in the automatic drying cycle, even if it does advance in the timed dry cycle. Another sign is if the dryer continues to run after the clothing inside is dry. Unplug the dryer from its power source prior to replacing this component. The person performing this task may wish to wear work gloves to protect their hands.The moisture sensor control board is compatible with dryers that are manufactured by Kenmore, KitchenAid, Kenmore Elite, Whirlpool, Amana, Crosley, Maytag, Inglis, Sears Canada, Roper, and Sears. This part is sold individually and it is a genuine OEM replacement part that comes straight from the manufacturer.