Parts for Briggs & Stratton 126T02-0194-B1: Electric Starter, Gasket Kits Parts

Seals between crankcase and crankshaft to prevent oil leaks and contamination. Replace if you notice oil pooling or engine performance issues.

Replace your blown cylinder head gasket to stop oil and coolant mixing. Prevents overheating and engine damage. Requires wrenches and screwdrivers.

This part is a breather gasket. This specific breather gasket is manufactured for use with small engines. The breather gasket forms a seal between the breather and the cylinder. The breather itself relieves the pressure that is inside of the crankcase by allowing the air to exit but not allowing the air to enter. A new breather gasket may be needed if the breather itself seems to be clogged. It can sometimes become clogged with oil. It's recommended to replace the breather gasket any time the breather itself is serviced to ensure that a proper seal is maintained. This part is a genuine Midwest Engine part and is an OEM part sourced directly from the manufacturer and it is sold individually. This specific breather gasket is compatible with engines, lawnmowers, and generators that are manufactured by Midwest Engine, Briggs and Stratton, Toro, and Lawn Boy.

Crankcase gasket creates an airtight seal to prevent oil and air leaks. Replace when deteriorated from heat and pressure. Confirm fit with model number.

Lower oil seal prevents engine oil leaks in small lawn and garden engines. Replace if you notice oil pooling or reduced performance. Verify fit with your engine model number.

This genuine OEM gasket sits between the carburetor and cylinder to create a seal on a wide range of different lawn mower engines. The carburetor is responsible for mixing fuel and air, so it is important that it remains well sealed. The cylinder sits on top of the combustion chamber, and must also be sealed to provide the proper amount of pressure to drive the pistons. Therefore, it's crucial that nothing escapes from the engine where these two parts meet. Gaskets are designed to take a lot of wear and tear, but they can eventually blow after repeated exposure to heat and pressure. When a carburetor and cylinder gasket blows, the engine will not perform as well. Look out for vibrations, backfiring, low output, or an engine that stops shortly after startup. To replace this gasket, use a screwdriver, wrench set, and pliers to gain access to the carburetor's inner workings. This part is compatible with Toro, Lawn Boy, and Briggs & Stratton lawn mowers and comes sourced from its original manufacturer. This part ships individually.

Fix poor engine performance and hard starting with this carburetor overhaul kit. Restores proper fuel mixture for lawn mower and trimmer engines.

Fix an engine that won't start or floods with fuel. This carburetor needle and seat kit controls fuel flow to prevent overflow. Simple repair.

Seals the carburetor float bowl to prevent fuel leaks. Replace if you notice fuel dripping or engine running issues. Verify fit with your model number.

Seals air cleaner base to carburetor, preventing debris bypass and air leaks. Replace when worn to maintain proper fuel mixture and engine performance.

Sealing washer creates a leak-proof seal in your lawn and garden engine. Replace when worn or cracked to prevent oil or fuel leaks. Confirm fit.

Engine gaskets are designed to seal and insulate various parts of the engine. Because they are subject to high heat and constant pressure, they can wear down and degrade over time. This can affect the seal of the engine and ultimately inhibit performance. If gaskets are left in disrepair, it can even create bigger problems in the engine. Therefore, a full replacement will be necessary. Gasket maintenance and replacement are considered parts of routine maintenance for lawn equipment. There are several of these gaskets found on lawn and garden equipment engines, and when more than one is faulty, it may be best to replace the entire set. This genuine set can be the perfect solution for compatible engines. This genuine OEM engine gasket set is designed to exact manufacturer standards and comes from Briggs & Stratton. This kit is designed for use with generator and lawn mower engines on select units from Toro and Briggs & Stratton. There are more than 150 units that can take this gasket set. These gaskets are made of durable composite materials and this set is sold individually, with a total of 18 gaskets included. Be sure to allow the engine to cool before replacing gaskets and always use the appropriate tools to prevent damage during replacement.

Replace your engine dipstick tube seal to prevent oil leaks and maintain proper lubrication. Essential when oil seeps around the dipstick. Verify fit with your model.

Seals the intake manifold to maintain proper pressure in your engine. Replace if cracked, worn, or causing air leaks. Verify fit with your model number.

Replace your engine's choke and throttle shaft seal to prevent air leaks and maintain proper engine performance. Verify fit with your model number.

This is an authentic muffler deflector screw that is found in small engines for outdoor power equipment from Briggs & Stratton. This metal screw is designed to secure the muffler deflector to the flywheel. In select models, it may also be used to secure the starter clutch to the flywheel. The screw is durable but exposed to high heat and constant wear, which means that it can become damaged or worn with regular use. If the screw is lost or damaged, it will need to be replaced. It should always be replaced with a genuine OEM part. This OEM muffler deflector screw is manufactured by Briggs & Stratton to exact standards and is compatible with several models of small engines. It can be used with various models of blowers, pressure washers, generators, and snow throwers from Toro, Murray, and Briggs & Stratton. It is sold as an individual replacement part. To replace this screw, the flywheel cover will need to be removed. Then, if it is still present, the old screw will need to be removed and the new one can be installed. This screw requires a hex or Torx screwdriver to install. Always wear gloves and disconnect the spark plug for safety when performing engine repairs.

Fix oil leaks around your dipstick with this engine O-ring seal. Prevents debris from entering oil system. Simple install stops leaks and protects motor.

This exhaust gasket is a genuine Midwest Engine replacement part for appliances operated by small engines, such as chipper shredders, snowblowers, leaf blowers, and lawn mowers. An exhaust gasket's purpose in the engine is to create a sealed layer between the carburetor and the exhaust tube to keep dirt and debris out of the infrastructure of the engine. A malfunctioning or broken exhaust gasket could compromise the seal between the carburetor and the exhaust tube, meaning that dirt and debris could get into the engine and cause damage. An exhaust gasket could be subject to damage from overuse and is generally known to require replacement over time from general wear and tear. If the exhaust gasket seal is compromised, it should be replaced immediately. Evidence of dirt and debris compromising an engine could take the form of oil leaking from the carburetor, black smoke pluming from the exhaust tube, and lower engine pressure than usual. This exhaust gasket is compatible with the following brands: Briggs and Stratton, Cub Cadet, and Toro. This part sold individually.