Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This part is discontinued by the manufacturer and is no longer available for purchase.
Flywheel key for mowers and outdoor power equipment. Secures flywheel to crankshaft. Replace if sheared, bent, or missing after blade strikes.
Float hinge pin for snow throwers and tillers. Secures the float hinge mechanism in place. Replace if pin is bent, sheared, or missing to restore proper assembly.
Fix hard starting, rough idling, or engine stalling issues with this carburetor overhaul kit. Includes gaskets and seals for complete rebuild.
This hose connector is a genuine MTD part, sold individually. This hose connector can be used as a replacement part for lawn mowers, snowblowers, tillers, leaf blowers, generators, and wood chippers. The purpose of the hose connector on one of these outdoor appliances is to channel water for the deck wash system.The hose connector of these outdoor appliances might have to be replaced if it can no longer channel water. This damage can take the form of puncturing, tearing, ripping, or erosion, in which case the hose connector should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This hose connector is compatible with the following outdoor appliance brands: MTD, Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn Boy, Snapper, and Simplicity.
Vinyl rubber fuel line hose that connects the fuel tank to the carburetor. Replace if cracked, brittle, leaking, or damaged to restore proper fuel flow.
Filters debris from fuel before it reaches the engine. Replace annually or when experiencing fuel flow issues. Confirm fit with your model number.
The spark plug is responsible for taking the electricity sent to it and creating the spark that ignites the internal combustion engine, allowing it to turn over and start. When the spark plug fires, it starts the engine and holds the current to keep the engine running. In the event that a spark plug is going bad, the engine may idle rough or stall out, or fail to start entirely. These symptoms could be a sign that it is time for a replacement. Replacing spark plugs is a part of routine engine maintenance and is easy with this genuine OEM replacement. This replacement spark plug is manufactured to exact standards by Briggs & Stratton, a leader in engines and engine components. This model is compatible with various engines on equipment from Toro, Briggs & Stratton, Lawn-Boy, and Vanguard by Briggs & Stratton, including lawn tractors and snowblowers. Spark plugs may require gapping before installation, which can be done with a special gap tool that is available. The replacement will also require a socket wrench or dedicated spark plug wrench. This unit is sold individually. It is always helpful to keep an extra spark plug on hand in case of emergency, as well.
Engine won't start or runs rough? This spark plug delivers ignition current to start your mower. Easy DIY fix with a 5/8" socket in under 15 minutes.
The air filter cartridge cleans the air as it comes into the engine. It will remove any particles and debris, keeping the engine free from buildup and problems. The air filter will become dirty and clogged with regular use and needs to be replaced as a part of routine maintenance. This is typically done once or twice a season, depending on frequency of use. It may be necessary to replace intermittently if there is an emergency issue. Air filters cannot be cleaned and should always be replaced with a genuine OEM replacement. This OEM air filter can be used with Briggs & Stratton engines in select lawn mowers and blowers from Toro, Husqvarna, and Briggs & Stratton. This pleated paper filter includes a plastic frame. The foam pre-filter cleaner is sold separately, and this cartridge is sold as an individual unit. Air filter replacements require no tools, but it is important to allow the engine to cool completely and wear gloves when performing maintenance and repairs.
Flat panel pleated paper air filter prevents dirt and debris from damaging your engine. Replace annually or when visibly dirty to maintain performance.
Replace a worn timing gear causing starting problems or engine timing issues. Common repair for snow throwers with engine performance problems. Moderate difficulty.
This genuine fuel cap creates the seal to keep the fuel in the tank and prevent spillage while the lawn and garden equipment is in use. This cap can sometimes become lost or damaged, or the screw threads may strip over time. In any case, the failed cap needs to be replaced with an OEM part or the equipment will not be able to be used. This OEM fuel cap is manufactured by Briggs & Stratton and meets strict standards. It can be used with machines from Briggs & Stratton, as well as those from Toro, Murray, Snapper, and Simplicity. The cap fits various models of blowers, vacuums, and snow throwers. This fuel cap is sold as an individual unit and does not include additional parts or hardware. There are no tools required to replace the fuel cap. Simply remove the old cap if it isn't already missing and then screw the new cap into place. Be sure to work carefully to prevent fuel spillage and wear gloves to protect the hands. Make sure the new cap is threaded correctly when installing, as well.
Pre-cleaner filter wraps around your engine's air filter to trap large debris before it reaches the main filter. Replace when torn or clogged to maintain airflow and engine protection. Verify fit by model number.
Replace a worn starter pulley if your mower won't start or the pull cord slips. This recoil starter component restores reliable engine starting.