Parts for Ge ZDT800SSF5SS: Escutcheon & Door Assembly Parts

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This left-side hinge friction pad assembly helps restore proper oven/door hinge resistance so the door stays in position and opens/closes smoothly. It replaces worn friction pads that allow slamming or uneven movement. What it does:

• Provides friction at the left hinge to hold the door at set positions
• Reduces door sag, sudden drops, and noisy closing
• Restores smooth, controlled opening and closing action
• Works with the hinge assembly to maintain correct door alignment

• Disconnect power to the appliance and support the door before servicing.
• Remove or loosen the hinge per the OEM instructions to access the friction pad; do not force components.
• Inspect hinge and surrounding hardware for wear or damage and clean mating surfaces before installing.
• Consider replacing the opposite side as well for balanced operation.

This right-hand hinge friction pad assembly controls door swing and provides a smooth, stable stop for the appliance door, helping keep it open at set positions and reducing wear on the hinge. What it does:

• Provides friction at the right-hand door hinge to help hold the door open and control closing speed
• Reduces metal-on-metal contact and noisy hinge operation when installed properly
• Helps prevent the door from swinging shut unexpectedly or sagging at the hinge
• Worn or damaged pads can cause uneven movement, noise, or difficulty keeping the door in position

• Disconnect power (unplug or switch off circuit) before starting work and follow all safety guidance
• Support the door while loosening hinge fasteners to prevent sudden movement or damage
• Use appropriate hand tools; avoid over-tightening fasteners when reinstalling to preserve pad function
• Inspect hinge mating surfaces and hardware for wear; replace any damaged components as needed

This replacement screw fastens and secures appliance components where a 1/4-28 threaded flange screw with an internal hex washer head is required. It restores proper fit and helps prevent movement or rattling of panels and assemblies. What it does:

• Secures panels, brackets and components that use a 1/4-28 threaded flange screw
• Internal hex washer head allows a compact, low-profile drive for tight spaces
• Helps stop looseness, vibration noise, and misalignment when the original fastener is missing or worn
• Matches OEM fit and fastening form for reliable reassembly

• Disconnect power and follow all appliance safety procedures before servicing
• Use the correct hex driver/socket to avoid stripping the head
• Tighten to snug fit—do not overtighten to avoid damaging threads or mating parts
• Replace with identical part number to ensure proper fit and function

This foam block cushions and supports the appliance door, helping reduce rattling and wear while maintaining proper door alignment. It's a simple replacement that restores the original fit and quiet operation. What it does:

• Acts as a cushion between the door and cabinet to reduce vibration and noise
• Helps maintain door alignment and prevent rubbing or chipping of trim
• Replaces worn or compressed foam that can cause loose-feeling doors
• Restores the original spacing and contact points for reliable closing

• One foam door block

• Disconnect power to the appliance before attempting any repair
• Remove the door or access panel to reach the foam block
• Install by aligning the foam in its original location; some versions use adhesive—press firmly to seat
• Use non-marring tools and avoid sharp objects that could tear the foam

This outer door service assembly replaces a damaged or worn outer door on compatible Monogram/GE appliances, restoring the door's exterior and helping the appliance close and seal properly. Ideal for visible dents, bends, or cosmetic damage. What it does:

• Replaces the appliance's outer door panel and related trim to restore appearance
• Helps the door sit and close correctly when warped or dented
• Reduces drafts or minor sealing issues caused by bent or damaged outer door surfaces
• Restores a factory-finish exterior for improved aesthetics

• Disconnect power to the appliance before beginning any repairs
• This assembly can be heavy or awkward; have a second person assist during removal and installation
• Installation typically requires removing door trim and fasteners; use appropriate tools and follow OEM instructions

This is a machine screw used to secure dishwasher components. The 10-32 thread and 3/8-inch length with an integrated hex washer head provide a firm, vibration-resistant hold to keep parts properly fastened.

• Secures brackets, panels, or internal assemblies in the dishwasher
• Helps prevent looseness, rattling, or misalignment during operation
• Common symptoms of a missing/stripped screw include panel movement, vibration, or loose mounting points

• Disconnect power and shut off water before servicing
• Use the correct nut driver or socket to avoid stripping the head
• Replace any damaged or missing screws in matching locations
• Do not overtighten; snug to manufacturer's torque guidance when available

This bracket handle is the replacement mounting bracket that secures a refrigerator or freezer door handle, restoring proper handle alignment and a secure grip. It helps keep the door handle firmly attached and functioning. What it does:

• Secures the door handle to the appliance door so the handle stays mounted and aligned
• Restores a loose, wobbly, or detached handle for reliable opening and closing
• Prevents further wear on handle fasteners by providing the proper mounting support
• Matches OEM fit and function for straightforward replacement

• One replacement bracket handle

• Basic hand tools typically required; handle hardware may need removal first
• Follow OEM instructions and use correct fasteners; replace any damaged screws or anchors
• Disconnect power to the appliance (or keep door open/unloaded) and work safely to avoid pinching or dropping the door

The LCD user interface service kit is an OEM part for GE dishwashers. It ensures seamless communication between you and your dishwasher. It provides a clear and intuitive interface for selecting and customizing various settings and cycles.

A bad LCD user interface service kit can result in issues such as a malfunctioning display, unresponsive buttons, or inaccurate readings. Causes of a bad LCD User Interface Service Kit can include wear and tear over time, electronic failures, or damage due to accidental impact or mishandling.

Symptoms of a bad LCD user interface service kit include:

• Flickering or distorted display on the display screen
• Unresponsive or non-functioning buttons on the user interface
• Incorrect or inconsistent readings of cycle settings or time remaining
• Visible signs of wear, cracks, or damage on the LCD display

Replace your faulty or damaged LCD user interface service kit with this genuine OEM GE part to restore your dishwasher. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This is the dishwasher's control console housing. Replacing a cracked or worn console cover restores a clean appearance and provides proper support for the user interface components so the controls stay aligned and protected.

• Forms the outer housing of the control console on the dishwasher door
• Provides mounting points for user-interface components and trim
• Helps shield internal components from incidental contact and everyday use
• Typical failure signs: cracked panel, broken tabs, loose/misaligned controls, cosmetic damage

• Disconnect electrical power at the breaker before servicing; wear cut-resistant gloves
• Open the door and remove the inner-door screws to release the existing console
• Note screw locations; transfer any reusable brackets/fasteners from the old assembly
• Reinstall and tighten evenly; close the door and restore power to test controls

The Silicone Light Pipe is an OEM part for GE dishwashers. It is designed to transmit light from the control panel to the user interface, ensuring the visibility of display indicators and controls.

Common causes of a bad light pipe include wear and tear over time, damage from excessive heat, or physical impacts that cause cracks or breaks.

Symptoms of a bad Silicone Light Pipe include:

• Dim or no illumination of the control panel indicators
• Uneven lighting across the control panel
• Difficulty in reading the display or control settings

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This lens and adhesive assembly replaces a damaged or loose control panel lens to restore a clean, readable user interface and secure the lens in place. It helps maintain proper button visibility and prevents moisture/dirt from getting behind the panel. What it does:

• Replaces a cracked, scratched, or detached control panel lens for clearer button/display visibility
• Uses adhesive backing to hold the lens securely to the control console
• Helps keep moisture, dust, and debris out of the control area to protect underlying electronics
• Restores a finished appearance to the appliance front

• One lens and adhesive assembly as shown

• High-level replacement: access to the control panel or console is required; follow the appliance service manual
• Clean the mounting surface thoroughly before applying the adhesive for best adhesion
• Disconnect power before starting and handle the lens carefully to avoid scratches
• Use manufacturer-recommended tools

This top control console is the exterior control panel that houses the oven's display and user controls, restoring reliable input and clear readouts for range/oven operation. Ideal when buttons, lights, or the control display fail. What it does:

• Provides the user interface for oven functions, timers, and temperature settings
• Houses the display and control buttons/touchpads for input and status feedback
• Re-establishes visible readouts when the display is dim, blank, or shows erratic information
• Replaces a console with unresponsive or stuck buttons that prevent normal oven control

• Disconnect power to the appliance before starting any repair to avoid shock hazard
• Remove the backguard/top trim to access mounting screws and connector(s)
• Handle the display and ribbon/connector gently; ensure connectors are fully seated during reassembly
• Test the console and oven functions before final reassembly

The Button is an OEM replacement part for GE dishwashers. It is a simple yet essential component responsible for allowing users to select wash cycles and activate various dishwasher functions. The button interfaces directly with the electronic control board to initiate commands.

Causes of a bad button include normal wear and tear through frequent use over time as well as possible malfunctions in the electrical switching components.

Symptoms of a bad button include:

• Failure to activate the intended function when pressed
• Unresponsive or non-functional buttons 
• Difficulty selecting desired wash cycles
• Cracked, faded, or illegible button labeling

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This 10-32 x 9/16 machine screw secures dishwasher components and panels. Replacing a missing or stripped fastener restores a tight fit, reduces vibration/rattles, and keeps assemblies properly aligned for reliable operation.

• Secures panels, brackets, or internal assemblies using a 10-32 machine thread
• Replaces lost, corroded, or stripped screws
• Can help resolve looseness or rattling from a loose mounting point
• Correct 9/16-inch length helps maintain proper spacing and alignment

• Disconnect power at the breaker before servicing
• Use the appropriate driver for the screw head; start threads by hand to avoid cross-threading
• Tighten snugly but do not overtighten to prevent stripping threads or damaging mating parts
• Compare to the original fastener to matching thread and length

• Thread size: 10-32
• Length: 9/16 inch

This dishwasher door wire harness assembly carries power and signals between the user interface/control and components in the door. Replacing a damaged harness restores reliable connections and can fix intermittent controls, no-starts, or cycles that stop when the door moves.

• Provides factory-terminated wiring path between the control/UI, latch, and other door-mounted components
• Replaces broken, pinched, heat-damaged, or corroded wires that interrupt electrical continuity
• Helps address symptoms such as unresponsive buttons, blank or flickering display, random beeps/lights, or unit won't start
• Operation changes when the door is opened/closed may indicate a failing door harness

• Disconnect power at the circuit breaker before servicing
• Remove the inner door panel to access the harness; support the panel to protect the UI/control
• Note original routing and connector locations; move one connector at a time, secure ties/retainers, and ensure grommets/strain reliefs are seated and wires are clear of hinges
• After reassembly, restore power and run a quick test cycle to verify operation

This insulation toe kick is a replacement panel that fits the refrigerator base to help block drafts and protect internal components under the cabinet. It restores the factory barrier that supports temperature stability and efficient operation. What it does

• Replaces damaged or missing toe-kick insulation that lets cold air escape beneath the appliance
• Helps reduce drafts and minimize warm air intrusion into the refrigerator cavity
• Protects wiring and components located in the toe-kick area from dust and debris
• Can help prevent uneven cooling or frost buildup that results from compromised base insulation

• One insulation toe kick panel

• Disconnect power to the appliance before starting any service
• Remove the existing toe kick/board and fasteners, then position the replacement so mounting tabs align with factory slots
• Avoid compressing or tearing the insulation; maintain original fit for proper performance

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces

This toe kick is the lower front access panel that covers and protects the appliance's kick space while giving a finished look. It replaces a damaged, dented, or missing front panel to restore appearance and basic protection. What it does:

• Covers the lower front area to hide vents, leveling legs, and base components
• Protects against scuffs, dust, and small impacts to the appliance base
• Restores a clean, finished look after damage or removal
• Helps maintain proper airflow clearance at the appliance front

• Typically installs with a few snap clips or screws
• Remove power and move the appliance away from cabinetry before accessing the toe kick area
• Handle edges carefully to avoid cuts; wear gloves if needed
• If clips or fasteners are damaged, replace them with OEM-specified parts for a secure fit

This top attachment strip secures the appliance's top panel and provides the mounting point for the door strike, restoring a stable, properly aligned front. It prevents panel movement and reduces rattles for a snug fit and reliable door engagement. What it does:

• Secures the top/front panel to the cabinet to maintain alignment and fit
• Serves as the mounting point for the door strike or latch components
• Helps eliminate rattling, vibration, and gaps at the top of the door area
• Restores reliable door engagement and prevents the strike from shifting

• Disconnect power to the appliance before beginning any repair
• Remove the top panel or access screws to reach the attachment strip; a screwdriver set is typically required
• Handle mounting tabs and edges carefully to avoid bending or damage
• Verify alignment of the door strike and test door closure after installation

This left-hand attachment strip secures trim and panels for a clean, finished fit on compatible GE appliances. It helps maintain proper alignment and prevents gaps that can collect dirt or allow panels to shift during use. What it does:

• Attaches and stabilizes a side trim or panel to the appliance cabinet
• Keeps door/side trim aligned to reduce rattling or shifting
• Helps maintain an even, finished appearance along the appliance edge
• Addresses symptoms like loose trim, visible gaps, or panel movement

• One left-hand attachment strip

• Remove power to the appliance (or disconnect power source) before starting work
• Use basic hand tools; avoid forcing parts to prevent breakage
• Replace with OEM-specified hardware if fasteners are missing or damaged

This bracket support hinge secures the appliance door to the cabinet, providing a stable pivot point for smooth opening and closing. Replaces a worn or broken hinge bracket to help restore proper door alignment and operation. What it does:

• Provides a mounting point for the door hinge to keep the door aligned and secure
• Prevents door sagging, uneven gaps, or misaligned closing caused by a damaged bracket
• Reduces wobble, clicking, or binding at the hinge area during door movement
• Works as the structural support between the door and cabinet to maintain proper sealing/contact

• One bracket support hinge

• Disconnect power and empty the door (shelves/drawers) before starting for safety and easier handling
• Support the door while removing/installing the hinge to prevent dropping or damage
• Use basic hand tools; follow OEM torque and alignment guidance when tightening fasteners

This bracket support hinge helps secure and guide the appliance hinge assembly, restoring proper door alignment and reliable movement. It replaces a worn or damaged hinge support to improve fit and operation. What it does:

• Supports the hinge assembly to maintain correct door alignment
• Reduces door sag, binding, or uneven closing caused by a damaged bracket
• Restores smooth hinge movement and helps prevent further wear to hinge components
• Commonly used when the door feels loose or the hinge appears bent or broken

• One bracket support hinge

• Turn off and unplug the appliance before starting any repair
• Remove surrounding panels or trim as needed to access the hinge per your model's service instructions
• Use appropriate tools and keep fasteners organized for reassembly
• Inspect and replace additional components as needed

This is a 6-20 machine screw, 3/8 inch length, used to secure trim, panels, or small components on compatible cooking appliances. Replacing a missing or damaged screw helps keep parts tight and prevents rattles or shifting during use.

• Fastens brackets, panels, or trim in the appliance chassis
• Helps restore a secure fit when the original screw is stripped or lost
• Can resolve issues like loose trim, minor rattling, or misaligned panels
• Nickel finish for corrosion resistance in warm, humid environments

• Disconnect power and allow appliance to cool before servicing
• Remove only the necessary adjacent fasteners to access the mounting point
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
• Replace any missing clips or spacers originally used with the screw

This striker latch secures the dryer door so the machine can run and maintain a proper seal during operation. It replaces a worn or broken striker to restore reliable door closure and normal cycle starts. What it does:

• Provides a catch point for the dryer door so the door stays firmly closed during operation.
• Helps the dryer detect a closed door and start/complete cycles; a damaged striker can prevent the dryer from starting.
• Prevents door rattling or intermittent opening during use.
• Restores proper door alignment and sealing when the original striker is bent, broken, or worn.

• One striker latch

• Disconnect power to the dryer before starting any repair.
• Remove the dryer front or door trim as needed to access the striker; retain original fasteners.
• Inspect the door strike mounting area and replace any stripped screws or damaged trim.
• After installation, test the door operation and run a short cycle to ensure proper function.

This inner door panel replaces the inner-facing panel of the oven door to restore a clean barrier between the oven cavity and the outer door. It helps keep heat inside and protects the outer assembly from spills and grime. What it does:

• Replaces damaged, cracked or heavily stained inner oven door panel
• Restores a proper seal and barrier between the oven cavity and door assembly
• Helps reduce heat loss and prevents food splatter from reaching the outer door
• Matches OEM fit and mounting locations for direct replacement

• One inner door panel

• High-level replacement; remove oven door per manufacturer instructions before disassembly
• Avoid touching glass edges; wear cut-resistant gloves and eye protection
• Keep track of screws and clips during reassembly; use manufacturer torque recommendations

The Detergent Module is an OEM replacement part for GE dishwashers. It plays a role in dispensing the appropriate amount of detergent into the wash tub at the right time during cycles.

Causes of a bad detergent module can be clogs or jams preventing proper detergent distribution, cracks or breaks in dispensing components, or faults in the electronic sensors controlling the dosage.

Symptoms of a bad detergent module include:

• Dishes or tubs with residual detergent buildup or lingering food soils
• Cycles failing to advance past the initial wash stages
• Cloudy or soapy water visible in the final rinse

This OEM GE part is also compatible with some Hotpoint, RCA, and select Kenmore dishwasher models.

This vent cover replaces the dryer's exterior vent opening cover to protect the vent from debris and pests while directing exhaust airflow. It restores a clean, finished look and helps keep the dryer vent pathway clear for proper operation. What it does

• Covers and protects the dryer vent opening from rain, leaves, and insects
• Helps direct dryer exhaust away from the appliance for safer airflow
• Prevents larger debris from entering the ductwork and causing blockages
• Restores the exterior appearance where the vent exits the home

• One vent cover

• Disconnect power to the dryer (unplug or switch off the breaker) before starting
• Typically secures with a few screws; access may require removing an exterior grille or trim
• Check the vent seal and surrounding duct for damage or obstructions while installing

This detergent plate is the replacement dispenser component that holds and releases detergent during the wash cycle, ensuring detergent is delivered when the machine runs for proper cleaning performance. What it does

• Holds detergent inside the dispenser area until the wash cycle calls for release.
• Opens or allows detergent to be flushed into the wash chamber at the correct time.
• Common symptom: detergent stays in the dispenser and doesn't release, leaving dishes or laundry soiled.
• Common symptom: damaged, cracked or warped plate can prevent proper release or seating of detergent.

• One detergent plate

• Disconnect power (and water if applicable) before accessing the dispenser to avoid shock or injury.
• Handle the plate carefully; plastic parts can crack if forced or over-tightened.
• Remove the door/dispenser trim per your model's service instructions to access the plate; reinstall ensuring proper alignment so the dispenser seals and operates correctly.

This vent conduit assembly routes exhaust from the dryer to the home vent, restoring proper airflow and helping the appliance vent safely. It replaces a damaged, crushed, or disconnected dryer vent channel to improve drying performance and reduce lint buildup. What it does:

• Channels dryer exhaust from the appliance to the wall vent
• Prevents restricted airflow caused by crushed or separated vent tubing
• Helps reduce long dry times and overheating symptoms
• Lowers risk of lint buildup and related odors near the dryer

• Disconnect power (and gas supply for gas dryers) before beginning service
• Verify correct alignment and secure with appropriate clamps or fasteners
• Inspect adjacent venting and clean lint from vent path while replacing

The Door Vent Seal is an OEM part for GE dishwashers. Located within the front dishwasher door, it functions to control moist air circulation and maintain humidity levels inside the wash chamber.

Causes of a bad door vent seal can include cracking of the flexible seal material. Mineral or soap deposits may also compromise sealing integrity.

Symptoms of a bad vent seal include:

• Excess condensation buildup within the door interior
• Water leaks detected around door ventilation openings
• Drying and sanitization issues related to inconsistent humidity levels

This GE OEM replacement part is also compatible with Hotpoint, RCA, and select Kenmore-branded dishwashers.

This transition piece assembly connects the dryer cabinet to the exhaust duct, guiding hot, moist air out of the dryer for proper venting and improved drying performance. It replaces a damaged or worn transition fitting. What it does

• Directs exhaust air from the dryer outlet into the venting system to help prevent backflow and poor airflow
• Helps reduce lint buildup at the cabinet outlet when intact and properly seated
• Restores proper vent path when a cracked, bent, or missing transition causes poor drying or longer cycle times
• Works with standard dryer venting components and clamps to form a secure exhaust connection

• One transition piece assembly

• Disconnect electric power (or shut off gas and unplug for gas dryers) before starting; follow appliance safety procedures
• Inspect the dryer outlet, vent hose, clamps, and adjacent seals; replace any damaged components for a proper seal
• Slide the transition into place and secure with appropriate clamps or screws; ensure the exhaust path is not kinked or crushed
• Check for unrestricted airflow after installation and clean any lint from the vent system

This vent fan assembly replaces a worn or failed exhaust blower to restore proper airflow and ventilation. It helps remove heat, moisture and cooking odors so the appliance runs cooler and vents correctly. What it does:

• Drives airflow through the appliance to vent heat and moisture
• Replaces a noisy, weak or non-spinning fan that causes poor ventilation
• Helps prevent overheating by restoring designed exhaust performance
• Fits into the factory fan housing and connects to the existing motor wiring

• Disconnect power to the appliance before beginning any work
• Basic hand tools required; mounting screws and electrical connectors typically reuse existing hardware
• Handle rotating parts carefully and ensure fan clears before restoring power

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces