Parts for Ge GWE19JGLAFWW: Freezer Door Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This freezer door foam insulation assembly fills the cavity inside the freezer door to restore insulation and help maintain cold temperatures. Replacing worn or damaged foam helps reduce frost buildup and improves overall temperature stability. What it does:

• Restores insulating barrier inside the freezer door to limit cold air loss.
• Helps reduce frost and ice buildup caused by poor door insulation.
• Supports proper temperature retention for more consistent cooling.
• Can improve energy efficiency when old foam has deteriorated.

• Disconnect power to the refrigerator before beginning work.
• Replacement typically requires removing the freezer door liner — handle parts and fasteners carefully.
• Wear gloves to protect hands and avoid contaminating the foam.
• Inspect door gasket and liner during reassembly; ensure a proper seal before returning power.

This replacement freezer drawer gasket creates a tight seal around the freezer drawer to help keep cold air inside and reduce frost buildup. Fits original mounting channels and restores proper drawer closure and insulation. What it does:

• Seals the freezer drawer to reduce air leaks and help maintain consistent temperatures
• Helps prevent frost and ice buildup by keeping warm, moist air out
• Restores a secure drawer closure for improved cooling performance
• Common symptom fix: cold loss, excessive frost, or a drawer that won't stay fully closed

• Inspect mounting channel and clean surface before installing; replace if channel is damaged
• Push gasket into place along the drawer perimeter; use gentle, even pressure to seat it fully
• If adhesive is present, allow recommended curing time before loading the drawer
• Disconnect power only if needed for access; follow basic safety precautions and appliance-specific service guidance

This replacement screw secures appliance brackets, panels, and components. It restores a tight, aligned fit when the original hardware is stripped, rusted, or missing, helping reduce vibration and rattling for reliable operation.

• Fastens brackets, panels, or mounts to keep components secure and aligned
• Replaces missing, stripped, or corroded hardware
• Helps reduce vibration, rattling, or loose/misaligned parts
• Matches original spec for reliable hold and fit

• Disconnect power before servicing; use proper PPE
• Match thread and length to the removed screw before installation
• Start threads by hand to prevent cross-threading; tighten until snug—do not overtighten
• Ensure parts are aligned and seating surfaces are clean before tightening

This right-side freezer door bracket secures and positions the freezer door hinge so the door opens and closes smoothly and stays aligned. It helps restore proper door fit and prevents sagging or uneven gaps. What it does:

• Supports the freezer door hinge assembly and holds the door in correct alignment
• Helps stop door sagging and reduces rubbing or binding when opening/closing
• Restores a tight door fit to help maintain proper seal and cooling performance
• Can address symptoms like a misaligned, loose, or drooping freezer door

• One right freezer door bracket

• Disconnect power to the appliance before starting any repair
• Remove contents and, if needed, the freezer door to access the bracket
• Use proper tools and keep hardware organized; replace any damaged screws or fasteners

This left freezer door bracket secures the freezer door to the cabinet and helps maintain proper alignment for smooth opening and closing. Replaces a bent or broken bracket to restore door support and fit. What it does:

• Supports the freezer door at the hinge area to keep the door properly aligned.
• Prevents door sagging that can cause gaps or improper sealing.
• Restores stable hinge movement for easier opening and closing.
• Helps maintain an even seal to reduce warm air intrusion.

• Power and water: unplug the appliance and shut off water before starting work.
• Use basic hand tools; remove the door or hinge cover per OEM procedure before replacing bracket.
• Keep door supported during removal/installation to prevent injury or damage.

The Fastener Handle Assembly is an OEM part for GE refrigerators, specifically designed to securely attach the refrigerator or freezer handle to the door. This assembly includes the necessary components, such as screws or bolts, brackets, and possibly end caps, depending on the design, to ensure a sturdy and durable connection between the handle and the door. 

Causes for a Fastener Handle Assembly to fail include normal wear and tear from repeated use, excessive force applied to the handle, or corrosion of metal parts due to moisture and refrigeration environment.  

Symptoms of a bad Fastener Handle Assembly include:

• A loose handle that moves or wobbles when touched or used.
• Difficulty in opening the refrigerator or freezer door due to a compromised handle attachment.
• Visible damage or wear to the components of the fastener assembly 

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The White Freezer Door Handle is an OEM component specifically designed for GE refrigerators. As a primary interaction point, the freezer handle provides accessibility to the bottom compartment. 

Causes of a bad freezer handle can include normal wear and tear over years of repeated opening and closing use. Exposure to moisture inside the refrigerator could potentially cause cracks or chips in the white paint finish as well.

Symptoms of a bad freezer handle include:

• Discoloration, chips, or cracks appearing in the white paint
• Difficulty opening or closing the freezer door smoothly  
• Looseness, wobble, or excess play developing in the mechanism
• Plastic components cracking, breaking, or visibly damaged

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.