Parts for Kenmore 596.79242017 (59679242017, 596 79242017): Freezer Door Parts

The Water Filter is an OEM part for Whirlpool refrigerators. It is designed to filter and purify the water for your refrigerator, ensuring clean and fresh drinking water and ice.

A bad refrigerator water filter can be caused by regular use and the buildup of contaminants over time. It may also become less effective if not replaced according to the manufacturer's recommended schedule.

Symptoms of a bad refrigerator water filter include:

• A decrease in water flow or water pressure.
• An unpleasant taste or odor in the water.
• The presence of particles or sediment in the water.
• Cloudy or discolored ice cubes.

If you notice any of these signs or if it has been more than six months since your last filter replacement, it's time to replace the refrigerator water filter with this genuine OEM part. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This 33-inch replacement handle restores a damaged or missing door grip so you can safely open and close the appliance. Durable molded construction offers the same fit and function as the original part. What it does:

• Provides a secure grip for opening and closing the appliance door
• Replaces handles that are cracked, broken, loose, or cosmetically worn
• Restores proper alignment so the door operates smoothly
• Matches OEM fit to engage existing mounting points and fasteners

• One 33-inch replacement handle

• Follow the manufacturer's instructions; power off or unplug the appliance before starting
• Typical installation uses existing screws or mounting posts—retain original fasteners if present
• Do not overtighten screws; ensure handle is seated flush before final tightening

This foam-in-place door gasket creates an air-tight seal between the door and cabinet, keeping cold air in and humidity out. Replacing a worn gasket helps restore proper temperatures, reduce frost and condensation, and maintain efficiency.

• Seals the door perimeter to prevent warm air infiltration and cold air loss
• Helps maintain interior temperature and moisture balance for reliable cooling
• Common symptoms of failure: torn, cracked, or deformed gasket; poor door seal; condensation or frost at the door; longer run times

• Disconnect power before servicing
• Let the gasket relax at room temperature or warm with hot water to ease installation; avoid excessive heat
• On many models, loosen the inner-door retainer or screws to remove and reinstall the gasket
• Seat corners first, press evenly all around, then adjust hinges/strikes if needed

This replacement door gasket seals a refrigerator door to help maintain proper internal temperatures and reduce condensation. It restores the seal so the appliance can keep food fresh and minimize frost buildup around the door. What it does:

• Creates an airtight seal between the door and cabinet to keep cold air in and warm air out.
• Helps prevent moisture, frost, and ice build-up around the door edges.
• Reduces temperature fluctuations that can cause food spoilage or localized warm spots.
• Corrects common symptoms like a door that won't close fully, visible gaps, or excessive frosting around the door.

• Always unplug the appliance and remove stored food before starting any door gasket replacement.
• Clean and dry the gasket channel and mating surfaces before installing the new gasket to ensure a proper seal.
• Basic hand tools may be needed; some models require loosening hinge or trim hardware—refer to the model's service instructions.
• After installation, check the gasket seating around the full perimeter and allow time for the gasket to form to the door.

The Door Handle Mounting Screw is an OEM part for Whirlpool refrigerators. It secures the door handle to the refrigerator door.

Causes of a bad door handle mounting screw can include wear and tear over time, improper installation, or excessive force applied to the handle. These factors can result in a loose or wobbly handle, compromising the functionality and aesthetics of your refrigerator.

Symptoms of a bad door handle mounting screw may include:

• A loose or unstable handle
• Difficulty in opening or closing the refrigerator door
• The handle becoming detached

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This mounting bracket secures and supports internal appliance components to keep assemblies aligned and reduce vibration. A simple replacement that restores proper fit and stops rattling or loose panels caused by a broken or bent bracket. What it does

• Provides a rigid anchor point to hold panels, assemblies or hardware in place
• Keeps components aligned to prevent rubbing, vibration and noise
• Restores proper fit where a worn or damaged bracket caused gaps or looseness
• Helps maintain safe operation by preventing parts from shifting during use

• One mounting bracket

• Disconnect power (unplug appliance or turn off circuit) before starting any repair
• Basic hand tools (screwdriver, nut driver) typically required; retain removed fasteners for reassembly
• Handle edges carefully; metal parts may be sharp
• for exact bracket location and proper reassembly

This upper freezer bin provides a roomy, secure shelf for organizing frozen foods and keeping items visible. It replaces a cracked or worn bin so the freezer door stores items safely and tidily. What it does

• Replaces a damaged or broken upper freezer storage bin to restore door storage
• Holds frozen foods and containers to prevent items falling or shifting
• Keeps freezer contents organized and visible for easier access
• Fits into the designated upper freezer door slot and supports normal use

• One upper freezer bin

• Remove frozen items and open the freezer door fully before replacing the bin
• Slide the old bin out gently and align the new bin with the door tracks until it clicks into place
• No special tools usually required; handle with care to avoid cracking the new plastic

Upper freezer glide that supports and guides the freezer drawer for smooth opening and closing. Replaces a worn or damaged glide to help eliminate binding, scraping, and uneven drawer movement. What it does:

• Guides and supports the upper freezer drawer for smooth travel; a failed glide often causes the drawer to stick or catch.
• Reduces metal-on-metal contact and scraping noises when opening or closing the drawer.
• Helps restore proper drawer alignment to prevent uneven gaps or rubbing against the cabinet.
• Lowers stress on adjacent components by returning consistent, even drawer movement.

• Disconnect power to the appliance before beginning any service work.
• Remove freezer contents and the drawer assembly per the manufacturer's instructions to access the glide.
• Replace the glide following the OEM diagram/steps; keep fasteners and mounting points aligned during reassembly.
• Test drawer operation after installation and adjust as needed for smooth, even travel.

This replacement mounting bracket secures internal components to restore proper alignment and stability in your appliance. It helps stop unwanted movement, vibration, or misalignment that can cause noise or operational issues. What it does:

• Holds and stabilizes panels or components to maintain correct positioning
• Reduces vibration and rattling caused by loose mounts or worn supports
• Prevents sagging or shifting that can affect door or panel alignment
• Helps restore reliable operation by keeping parts fixed in place

• Disconnect power to the appliance before beginning any repair
• Use basic hand tools; retain original fasteners unless replacements are provided
• Compare bracket orientation and mounting holes to the original before fastening

This replacement glide supports and guides the upper freezer shelf so it slides smoothly and stays aligned. Restores proper shelf movement and helps prevent binding, sagging, or the shelf from tipping when loaded. What it does:

• Supports the freezer shelf and keeps it seated in the correct track.
• Guides shelf movement for smooth sliding in and out of the freezer.
• Reduces sticking, binding, or uneven sliding caused by a worn or broken glide.
• Helps prevent the shelf from tipping or falling when placing items on it.

• Disconnect power to the appliance before beginning any service.
• Access often requires removing the upper freezer shelf or drawer to reach the glide.
• Remove the old glide and snap or slide the replacement into the same mounting location; use appropriate tools and avoid forcing parts.
• Inspect the shelf edge and track for damage and clean mating surfaces before installing.