Parts for Frigidaire FGHB2866PF3: 02 - Freezer Drawer, Baskets Parts

Filters contaminants from refrigerator water and ice. Replace every 6 months or when flow slows for clean, fresh-tasting water. Verify fit by model.

Forms an airtight seal around your refrigerator door to keep cold air in and prevent temperature loss. Replace if torn, cracked, or not sealing properly.

Direct replacement handle for refrigerator freezer baskets. Restores secure grip for lifting and removing baskets. Replace cracked, broken, or missing handles.

Mounting screw for refrigerator interior or exterior components. Replace if missing, stripped, or corroded to secure panels, brackets, or parts.

Replacement screw that secures refrigerator door handles to the door. Needed when the original screw is worn, missing, or stripped, causing a loose handle.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

Single mounting screw secures trim, panels, or brackets inside your refrigerator. Replace lost, stripped, or damaged screws to keep components firmly attached.

Secures refrigerator and freezer door handles to the door. Replaces lost, stripped, or missing screws during handle installation or replacement.

Wire freezer basket for bottom-mount refrigerators. Organizes frozen foods in a removable bin. Replace if your basket is cracked, broken, or missing.

Replace your damaged or broken dishwasher lower rack assembly. Includes basket, divider, and support arm to restore proper dish loading and organization.

This right-hand wire basket slide supports and guides the basket as it opens and closes. Replace it if the basket binds, tilts, or no longer glides smoothly due to a worn, cracked, or broken slide.

• Provides the track for the basket to slide in and out on the right side
• Helps keep the basket aligned and stable within the compartment
• Common symptoms: sticking or uneven travel, basket tilts/drops on one side, visible cracks or damage
• Restores smooth operation and proper support for the wire basket

• Disconnect power and remove the basket and contents before starting
• Remove screws or clips securing the old slide; retain fasteners for reuse
• Align and secure the new slide in the same mounting locations
• Reinstall the basket and verify smooth operation before loading

Restores smooth drawer movement in your refrigerator. Replace worn, cracked, or broken slide assembly when drawer sticks, sags, or loses alignment.

Supports and guides refrigerator shelves and drawers for smooth sliding. Replace when drawers stick, wobble, or won't glide properly. Verify fit with model.

Mounting clip that secures internal panels and trim in your refrigerator. Replaces broken, cracked, or missing retainers that cause loose or rattling parts.

Shelf divider that separates and organizes items inside your refrigerator. Installs on shelves or in drawers. Replace if cracked, warped, or missing.

Plastic shelf divider that organizes items in your refrigerator compartment. Replace if cracked, broken, or missing to restore proper food separation.

Interior divider that separates and organizes items on refrigerator shelves or inside drawers. Replaces cracked, broken, or missing dividers.

Structural cabinet brace that stabilizes your refrigerator's interior frame. Replace if cracked, bent, or broken to restore proper alignment of doors.

Structural rail that supports refrigerator shelves and pantry drawer assemblies. Replace if cracked, broken, or missing to restore level support.

Replacement door handle bar for your refrigerator. Installs on the door to provide a sturdy grip. Needed when original is loose, cracked, or damaged.

Secures and supports the freezer drawer in your refrigerator, keeping it aligned and stable. Replace this bracket if yours is broken, cracked, or worn.

This timing bar is a replacement mechanical link used in the appliance's timing assembly to transfer motion between timer components. It helps restore proper cycle advancement and reliable mechanical timing movement. What it does

• Transfers motion between timer gears and linked components to advance cycles
• Restores consistent mechanical timing action when a worn or broken bar prevents cycle changes
• Commonly replaced when the timer fails to engage or advance smoothly
• Works as a direct-fit replacement for the original timing linkage on compatible units

What's included

• One timing bar (1 count)

Install notes

• Disconnect power before servicing to avoid shock or unexpected motor operation
• Inspect surrounding cams, gears, and mounting hardware; replace any damaged parts for reliable operation
• Handle small components carefully to avoid bending the bar or misaligning timing engagement

Small structural block that secures and aligns the refrigerator or freezer handle to the door. Replace when cracked, broken, or missing to restore handle fit.

Mounting screw secures shelves, panels, and brackets inside your refrigerator. Replace missing, rusted, or stripped screws to restore secure fit.

Replaces worn, cracked, or missing basket trim on refrigerator baskets. Restores the finished edge and secure fit to prevent rubbing and damage.

Lock pin that secures refrigerator drawers and shelves in place. Replace if the pin is broken, missing, or won't hold drawer components securely anymore.

This is a service wrench used to loosen and tighten appliance fasteners for maintenance and repairs, making access and part replacement easier for technicians and DIYers. Durable tool designed for specific appliance fastener sizes. What it does:

• Provides the correct fit and leverage for removing or installing designated appliance nuts, bolts, and fittings
• Helps safely access internal components during service and part replacement
• Reduces risk of rounding fasteners compared with improvised tools
• Useful for routine maintenance tasks and repair procedures that require a dedicated wrench

• One wrench

• Use the wrench only for its intended appliance fasteners; avoid excessive force
• Disconnect power and water to the appliance before beginning service
• Wear safety gloves and eye protection when working on appliances

Mounting screw for refrigerator components and panels. Replaces lost, stripped, or damaged screws. Essential hardware for secure assembly.

Mounting screw for refrigerator panels, handles, and internal components. Replace stripped, corroded, or missing screws to secure assemblies properly.

Fixes loose panels and rattling noises in refrigerators. This mounting screw secures panels and trim to restore proper fit and eliminate movement.

Machine screw secures panels, trim, and internal brackets in your refrigerator. Replace worn, stripped, or missing fasteners to keep components aligned.

Ice maker producing large ice blocks or cylinders instead of cubes? This optional freezer ice maker kit restores proper ice cube formation in minutes.

Secures panels, brackets, and internal components in your refrigerator. Replace when the original fastener is missing, stripped, or corroded for proper fit.