Parts for Kenmore 106.51783410 (10651783410, 106 51783410): Freezer Liner Parts

The Cover is an OEM part for Whirlpool refrigerators. This cover maintains the refrigerator's interior aesthetic and functionality. It is typically used to cover compartments, helping to keep the internal environment clean and organized, while also supporting the efficient operation of the appliance.

Causes of a bad Cover can include physical damage such as cracks or breakage, which can happen due to accidental impacts or overloading of the compartment it protects.  

Symptoms of a bad Cover include:

• Visible damage or cracks that compromise the integrity of the refrigerator's interior
• Loose or ill-fitting cover, leading to poor compartment insulation or temperature regulation
• Increased noise levels due to improper sealing of compartments
• Difficulty in accessing stored items or compartments not staying securely closed

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This refrigerator glass shelf replaces a cracked or missing shelf to restore a stable, easy-to-clean storage surface. It helps contain spills and returns your refrigerator to its intended organization and capacity.

• Provides a flat, sturdy storage surface inside the refrigerator
• Helps contain small spills and prevents drips to lower shelves
• Restores lost capacity and organization when a shelf is broken or missing
• Common symptoms: cracked or shattered glass, shelf sagging, items tipping, reduced storage space

• Unplug the refrigerator and remove food from the affected area before service
• Wear cut-resistant gloves and eye protection when handling broken or new glass
• Remove the old glass; clean the frame/rails; slide the new glass fully into the supports until seated
• Confirm the shelf is level and secure before reloading items

The Refrigerator Temperature Sensor is an OEM replacement part for Whirlpool refrigerators. It is a crucial component responsible for accurately monitoring and regulating the temperature inside the refrigerator and freezer compartments.

Symptoms of a faulty temperature sensor include:

• Inconsistent or fluctuating temperatures in the refrigerator or freezer
• The refrigerator running continuously or not cooling properly
• Error codes or indicators related to temperature control issues

Causes of a bad temperature sensor can include normal wear and tear over time, electrical malfunctions, sensor failure, or damage from moisture or condensation.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models. 

This replacement glass shelf restores a flat, easy-to-clean storage surface inside your refrigerator. Replace cracked or missing shelf glass to support food properly and help contain small spills for easier cleanup. What it does:

• Provides a sturdy, level surface for organizing food
• Helps contain spills so liquids don't drip onto lower shelves or drawers
• Restores safe use when the original shelf glass is cracked, shattered, or missing
• Improves visibility and cleanliness inside the refrigerator

• 1 glass shelf panel

• Disconnect power and remove food items from the shelf area
• Slide out the shelf/frame and lift out the broken glass carefully; wear cut-resistant gloves
• Clean the frame or rails; transfer any trim from the old panel if your model uses it
• Seat the new glass fully in the frame/rails before reinstalling the shelf assembly

This freezer bin restores clean, organized storage in your freezer compartment. Replace a cracked or missing bin to keep food secure and accessible, and help ensure the door or drawer closes smoothly without items shifting or spilling.

• Provides a dedicated storage area to keep frozen items organized
• Replaces cracked, broken, or missing bins that reduce storage capacity
• Helps prevent items from tipping or falling during opening and closing
• Common signs it's needed: broken tabs, warping, bin won't stay seated, or persistent wobble

• Unplug the refrigerator or switch off power before servicing
• Empty the old bin; lift up and out to release it from the molded tabs/rails
• Align the new bin with the tabs/rails and press down or slide in until fully seated
• Confirm smooth door/drawer closure after installation

This light lens covers and diffuses the freezer compartment bulb so the light is bright but not harsh, protecting the bulb and helping illuminate food clearly when the door opens.

• Diffuses freezer light for even illumination
• Shields the bulb from moisture and impact
• Helps restore lighting if the original lens is cracked, yellowed, or missing
• Common symptoms: dim lighting, exposed bulb, broken or discolored cover

• Unplug the appliance before servicing
• Allow the area to warm slightly to reduce brittleness of old plastic
• Gently release the retaining tabs; avoid prying on cold, brittle parts
• Handle the new lens by the edges to prevent scratches

This replacement trim pan restores the finished edge around the appliance cabinet and helps keep the interior sealed and looking neat. It replaces a worn, cracked or missing trim to improve appearance and help maintain proper airflow. What it does:

• Covers and protects the cabinet edge where panels meet, restoring a clean trim line
• Helps maintain the intended cabinet seal and airflow path by replacing damaged trim
• Reduces gaps that can collect dirt, moisture, or debris around the cabinet perimeter
• Improves overall appearance when original trim is cracked, warped or missing

• One trim pan

• Disconnect power to the appliance before starting any repair
• Remove any nearby shelves, drawers or access panels as needed for clearance
• Typically secures with clips or screws; use appropriate screwdriver or trim tool and avoid forcing plastic tabs

This light socket replaces a worn or heat-damaged lamp holder so your appliance light works reliably again. Its straight-connector design fits applications with in-line wiring, ensuring a secure electrical connection to the interior light bulb.

• Holds the light bulb and supplies power to it
• Restores interior illumination for better visibility
• Straight terminal orientation for housings requiring inline wiring clearance
• Typical signs of failure: light stays off with a good bulb, flickers, or shows heat damage at the socket

• Disconnect power at the breaker or unplug before servicing; allow the area to cool completely
• Remove any lens/cover; transfer wires one at a time to maintain correct connections
• Secure the socket with existing bracket/fasteners; do not overtighten
• Test light operation before reassembly and confirm the door switch activates the light

The Light Socket Kit is an OEM part for Whirlpool refrigerators. This kit includes the light socket and necessary components to ensure proper installation and functionality. It is designed to hold the refrigerator light bulb securely and provide reliable electrical connections to illuminate the interior of the refrigerator.

Common causes of failure include wear and tear, corrosion from moisture, or damage from handling or bulb replacement.

Symptoms of a bad Light Socket Kit include:

• Refrigerator light not turning on
• Flickering or intermittent lighting
• Visible damage or corrosion on the socket
• Burned or melted areas around the socket

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Bulb-Light is an OEM part for Whirlpool refrigerators. This bulb is designed to illuminate the interior of your refrigerator, making it easier to see and organize the contents. 

Symptoms of a failing refrigerator light bulb include:

• Dimming or flickering of the light
• Light not turning on when the refrigerator door is opened
• Inconsistent performance, with the light turning on and off intermittently

Causes of light bulb failure in refrigerators generally involve the bulb reaching the end of its useful life, loose connections in the light socket, or issues with the refrigerator’s door switch that controls the light.

This OEM part is also compatible with other Whirlpool brand appliances, such as Maytag, KitchenAid, Jenn-Air, Amana, and others.

The Ice Bin Safety Switch is an OEM replacement part for Whirlpool refrigerators, ensuring safe and efficient operation of the ice maker. Positioned to detect the ice bin, it activates the ice maker when the bin is in place and deactivates it when removed for cleaning or emptying.

Common causes for Ice Bin Safety Switch issues may include physical damage occurring during cleaning or routine use, electrical problems like short circuits, wear on the switch's contacts affecting functionality, and misalignment or incorrect installation of the ice bin causing inaccurate bin detection.

Symptoms of a malfunctioning Ice Bin Safety Switch include:

• The ice maker not producing ice
• The ice maker continuing to operate even without the ice bin in place
• Unusual behavior from the ice maker, such as starting and stopping erratically

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.