Parts for Lg LFX25974ST/04: Freezer Parts

The LG Refrigerator Water Filter is an OEM Replacement Part. It is designed to improve the quality of water and protect refrigerators and ice machines from sediment deposits. This NSF-Certified filter effectively reduces iron and particulates. It also preserves beneficial minerals like fluoride. The filter measures 5.6 inches high and 3.3 inches in diameter.

It is installed by removing the top shelf and pulling the old filter downward. Then turn it counter-clockwise, and replace it with the new filter aligned in a horizontal position. To ensure the best performance and the removal of trapped air and contaminants, it's recommended to flush the dispenser with 2.5 gallons of water in alternating cycles. If your model includes a water filter indicator, press and hold the Filter or Reset button for 5 seconds after installation. With a lifespan of 6 months and a 500-gallon capacity, this filter provides both quality and longevity.

The Roller Assembly is an OEM part for LG refrigerators. It comprises the set of rollers that suspends and aids the smooth gliding of refrigerator shelves. The rollers are designed with precision bearings to withstand the weight of shelf loads and years of use while providing quiet and frictionless movement. 

Causes of a bad roller assembly include worn-out or damaged rollers due to heavy usage over time, or shelf loads that are too excessive. 

Symptoms of a bad roller assembly are:

• Shelves that do not easily slide in and out 
• Grinding or squeaking noises emanating from the shelf tracks
• Shelves that get stuck or do not smoothly glide

This OEM LG part is also compatible with Sears/Kenmore. Replace yours today and restore like-new shelf functionality to your refrigerator.
 

The Freezer Tray Roller is an OEM part for LG refrigerators. It is a dual roller wheel assembly located at the rear wall of the freezer compartment. The roller aids sliding shelf movement by reducing friction between trays and the liner wall. 

Causes of a bad freezer tray roller include cracks, flat spots, or separated roller pieces from wear over years of use.

Symptoms of a bad tray roller are:

• Difficulty sliding shelves smoothly in and out of position
• Excessive force required to access stored items
• Noisy operation or rattling noises within the freezer

This genuine LG OEM replacement part is also compatible with some Kenmore models.

This drawer tray assembly forms the base of a refrigerator bin or drawer, providing a sturdy, level surface and proper alignment with the rails. Replace a cracked or warped tray to restore smooth operation and reliable food storage.

• Provides the structural platform that supports the drawer and its contents
• Interfaces with slide rails to help the drawer open and close smoothly
• Helps keep items level and organized within the compartment
• Common symptoms of failure: cracks, sagging, wobble, sticking drawer, or misalignment

• Disconnect power and remove items from the affected drawer before starting
• Extend and lift the drawer to release it; disengage any locking tabs/rails as designed
• Position and seat the new tray, ensuring tabs/slots are fully engaged and rails align
• Reinstall the drawer and verify smooth travel before reloading

This guide rail secures and guides a sliding compartment for smooth opening and closing, restoring proper alignment and movement. Designed to replace a worn, bent, or broken rail so drawers or racks glide reliably. What it does

• Guides a drawer or rack along its track to maintain smooth, even motion
• Restores alignment when the compartment drags, sticks, or shifts
• Replaces bent, cracked, or worn rail that causes noisy or uneven movement
• Helps prevent further wear to the sliding assembly by re-establishing correct travel

• Unplug the appliance or shut off power before beginning service
• Remove the drawer/rack and any obstructions to access the rail mounting points
• Inspect mating hardware and slides; replace any damaged components for best results
• Use common hand tools; for model-specific instructions

This guide rail keeps a refrigerator/freezer drawer aligned and sliding smoothly, restoring proper drawer movement and preventing jamming or uneven closing. Designed to match the original mounting points for a secure fit. What it does:

• Guides and supports the drawer as it opens and closes to ensure smooth, even travel
• Replaces worn or bent rails that cause sticking, binding, or misalignment
• Reduces rattling or noisy operation from a loose or damaged slide
• Helps maintain proper drawer sealing and alignment for consistent performance

• One guide rail

• Disconnect power to the appliance and empty the drawer before starting
• Remove trim or stops as required to access mounting screws; retain all fasteners if reusable
• Align rail with original mounting holes and secure with the correct screws; do not overtighten

The Drawer Guide is an OEM part for LG refrigerators. This part allows the smooth and effortless operation of the refrigerator's drawers, ensuring they glide in and out with ease. 

Causes of a bad drawer guide can be attributed to wear and tear over time, misalignment during installation, or damage from excessive force or improper use of the drawers.

Symptoms of a bad drawer guide include:

• Difficulty opening or closing the drawers
• Drawers getting stuck or not sliding properly
• Excessive friction or resistance when operating the drawers
• Drawers becoming misaligned or tilted
• Unusual noises or grinding sounds when using the drawers

This OEM LG part is also compatible with some Kenmore models.