Parts for Lg LTC24380ST/00: Freezer Parts

This freezer shelf assembly restores a stable, level surface for storing frozen foods. Replace a cracked or missing shelf to regain usable space, keep items organized, and help prevent tipping inside the freezer compartment.

• Provides a sturdy storage surface in the freezer compartment
• Direct replacement for a damaged, cracked, or missing shelf assembly
• Helps keep items level and organized for easier access
• Seats into the factory shelf supports for a secure fit

• Remove items from the area before removing/installing the shelf
• Handle carefully; edges can be sharp—wear cut-resistant gloves
• Align with side supports and slide or set into place until fully seated
• Do not force; inspect/replace damaged supports before installing the new shelf

This motor bracket is the OEM-style mounting bracket that secures the appliance motor to the cabinet, keeping the motor aligned and reducing vibration for reliable operation. It helps restore proper motor support and stable running. What it does:

• Provides a secure mounting point to hold the motor in correct position
• Maintains motor alignment to prevent belt slip and uneven wear
• Reduces vibration and noise caused by a loose or damaged motor mount
• Can resolve symptoms such as unusual motor noise, excessive vibration, or motor movement during operation

• Disconnect power (and gas if applicable) before starting any repair
• Basic hand tools are typically required; follow the appliance service manual for access steps
• Inspect surrounding components (mounting fasteners, motor and belts) and replace any damaged parts

This replacement fan blade mounts on the fan motor to move air for proper cooling. A cracked, loose, or damaged blade can cause noise and weak airflow—replacing it restores smooth, reliable air circulation. What it does:

• Drives airflow to help maintain stable temperatures throughout the appliance
• Supports efficient cooling by circulating air across key areas
• Common symptoms include rattling or scraping near the fan, vibration, or wobbling
• Replacement is recommended if the motor runs but the blade slips, doesn't spin, or is visibly damaged

• 1 fan blade

• Disconnect power before servicing
• Access the fan area by removing covers/shelves as needed
• Note blade orientation; pull the old blade straight off the shaft and press the new blade on until fully seated
• Spin the blade by hand to confirm clearances, reassemble, and restore power

This grille assembly for the fan restores proper airflow and protects the fan blades from debris and impact, helping the appliance run quietly and efficiently. It's a direct-fit replacement designed to match the original mounting points. What it does:

• Covers and shields the fan area to prevent objects from contacting the fan blades
• Helps maintain correct airflow for proper cooling and operation
• Reduces rattles and vibration caused by a damaged or loose grille
• Prevents dirt and debris buildup on the fan that can affect performance

• One grille assembly

• Disconnect power to the appliance before starting any repair
• Remove any trim or fasteners securing the old grille; parts typically install with clips or screws—retain fasteners if reusing
• Align grille to existing mounting points and secure without overtightening to avoid cracking the plastic

This grille assembly for the fan restores proper airflow and protects the fan blades from debris and impact, helping the appliance run quietly and efficiently. It's a direct-fit replacement designed to match the original mounting points. What it does:

• Covers and shields the fan area to prevent objects from contacting the fan blades
• Helps maintain correct airflow for proper cooling and operation
• Reduces rattles and vibration caused by a damaged or loose grille
• Prevents dirt and debris buildup on the fan that can affect performance

• One grille assembly

• Disconnect power to the appliance before starting any repair
• Remove any trim or fasteners securing the old grille; parts typically install with clips or screws—retain fasteners if reusing
• Align grille to existing mounting points and secure without overtightening to avoid cracking the plastic

This DC fan motor drives the refrigerator's fan to circulate air across the coils and through the cabinet. Replacing a weak or failed motor restores proper airflow for consistent temperatures and reliable cooling performance.

• Spins the fan blade to move air through the cabinet and across heat-exchange coils
• Helps maintain even, stable temperatures throughout the appliance
• Typical failure symptoms: fan not running or intermittent, unusual humming/squealing/rattling near the fan area, poor cooling or temperature fluctuations
• Can reduce hot spots by restoring proper air circulation

• Disconnect power before servicing; use cut-resistant gloves
• Access the motor behind the rear cover or interior panel (location varies by model)
• Note connector orientation; disconnect harness, mount the new motor, and securely route wiring
• Ensure the blade spins freely with no obstructions; restore power and verify fan operation

The Rear Evaporator Motor Grommet is an OEM part for LG refrigerators. It's designed to secure and cushion the evaporator motor, ensuring it remains in place and operates quietly. This grommet plays a crucial role in minimizing vibrations and noise from the motor, which can otherwise lead to a disruptive refrigerator operation.

Causes of a bad Rear Evaporator Motor Grommet can result from deterioration due to cooling and thawing cycles in the refrigerator. Physical damage during cleaning or servicing may cause a loose motor fit.  

Symptoms of a malfunctioning Rear Evaporator Motor Grommet include:

• Unusual noises or vibrations from the back of the refrigerator.
• The evaporator motor shifting out of place, which can affect cooling efficiency.
• Increased wear on the evaporator motor due to lack of proper cushioning and support.

This OEM LG part is also compatible with some Kenmore models.

The Front Evaporator Motor Grommet is an OEM part for LG refrigerators. This grommet cushions and secures the evaporator motor, reducing vibrations and noise during operation to ensure efficient cooling.

Causes of a bad grommet can include prolonged use leading to material fatigue, exposure to extreme temperatures, or physical damage from accidental impacts. A damaged grommet can result in increased noise and potential misalignment of the evaporator motor.

Symptoms of a bad evaporator motor grommet include:

• Increased noise from the refrigerator
• Vibrations or rattling sounds
• Poor cooling performance
• The evaporator motor becoming loose

This OEM LG part is also compatible with Sears/Kenmore.