Parts for Ge CWE23SSHHSS: Freezer Shelves Parts

Filter Material: Carbon Block. Micron Rating: 0.5. Flow Rate: 0.5 gpm. Operating Pressure: 120 psi. Approximate dimensions: 10" x 1-3/4"

The GE Refrigerator Water Filter RPWFE is an OEM part for GE refrigerators. This advanced water filter is crucial for removing contaminants and impurities from your refrigerator's water supply, ensuring you have access to clean, fresh-tasting drinking water and ice. Utilizing a state-of-the-art filtration process, the RPWFE filter is capable of reducing various contaminants, including lead, chlorine, and five pharmaceuticals, providing peace of mind about the quality of your water.

Over time, water filters can become clogged with particles and contaminants, leading to a decrease in water flow and a reduction in the effectiveness of filtration. It's important to replace your refrigerator water filter as recommended by the manufacturer, typically every six months, to ensure optimal performance and maintain the quality of your water.

Symptoms of a filter needing replacement include:

• Reduced water flow from the dispenser.
• Unpleasant taste or odor in the water or ice. 
• The refrigerator's water filter indicator light turns on

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This is a replacement #8-18 by 1/2-inch appliance screw used to secure panels, trim, and internal components. It restores proper fastening where the original screw is missing, stripped, or corroded. What it does:

• Fastens panels, brackets, trim pieces, and small components
• Restores secure mounting when a screw is missing or worn
• Stops rattling and vibration caused by loose or stripped fasteners
• Compatible with applications that call for a #8-18 x 1/2" screw

• One screw (8-18 x 1/2 in)

• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; stop when the component is snug to prevent damage
• If screw threads are damaged, replace with the correct thread size rather than forcing
• Disconnect power before working on electrical components or panels that expose wiring

This mounting screw secures appliance components to the chassis for a tight, rattle-free fit. Replacing a missing, stripped, or corroded fastener helps keep panels, brackets, or burner assemblies properly aligned and secure.

• Fastens designated parts to the appliance frame or mounting points
• Helps maintain proper alignment of panels, trim, brackets, or burner assemblies
• Restores hold when the original screw is worn, rusted, or lost
• Symptoms include loose or wobbly components, rattling/vibration, or visible gaps

• Disconnect power; allow all surfaces to cool. For gas units, also shut off the gas supply.
• Use the correct driver/bit; avoid cross-threading.
• If mating threads or clip/nut are damaged, repair or replace them before installing.
• Tighten until secure; do not overtighten to prevent stripping.

The Lower Drawer Gear is an OEM replacement part for GE refrigerators. It plays an important role in allowing smooth operation of the lower freezer drawer. The drawer gear mechanism helps guide and support the drawer assembly during opening and closing. 

Symptoms of a bad lower drawer gear include:

• The drawer failing to slide open or close properly
• Increased resistance or friction when operating the drawer  
• Noisy or grinding sounds coming from the drawer area
• The drawer becoming misaligned or sidetracked from its rails

Causes of a bad lower drawer gear can be wear and tear over extended use. Exposure to excessive weight or strain on the drawer can potentially damage the gear components over time.

Note: Right Side

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Left side

The Connector Gear Pinion is an OEM part for GE refrigerators. It is integral to the smooth operation of the freezer drawer, connecting the rail system and allowing the drawer to open and close effortlessly.

Causes of a bad connector gear pinion can include general wear and tear over time, excessive force applied during operation, or debris causing obstructions within the mechanism.

Symptoms of a bad Connector Gear Pinion include:

• Difficulty in opening or closing the freezer drawer
• Unusual noises such as grinding or clicking when operating the drawer
• The drawer not staying aligned or properly seated on the rails
• The drawer getting stuck or not moving smoothly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Crossbar Pin is an OEM part for GE refrigerators. It is a small but essential component that secures the crossbar in place within the refrigerator's interior. This pin ensures that the crossbar, which supports various shelving and storage configurations, remains stable and functional.

Causes of a bad Crossbar Pin can include wear and tear over time, accidental impact or damage during loading or cleaning, or corrosion due to moisture exposure. These factors can compromise the integrity of the pin, leading to instability in the crossbar.

Symptoms of a bad Crossbar Pin include:

• Shelves or storage bins not sitting level
• Difficulty in adjusting or removing the crossbar
• Noticeable wobbling or instability in the crossbar

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This screw set replaces worn or missing fasteners used on the freezer door assembly to restore secure attachment of door components. Ideal for fixing loose panels and reducing rattling so the door sits and seals properly. What it does:

• Secures freezer door components and trim to the door assembly.
• Restores proper fit and alignment when screws are corroded, stripped, or missing.
• Helps eliminate door rattles and loose panels that can affect door seating.
• Matches OEM fastener type and lengths used on the freezer door assembly.

• Screw set for freezer door

• Disconnect power and empty the door area before starting work.
• Use the correct screwdriver or bit to avoid stripping heads; install screws until snug—do not overtighten.
• Keep removed parts in order and follow OEM instructions for reassembly.

This stopper divider holds and positions a refrigerator drawer or shelf divider to keep contents separated and prevent sliding. Durable molded plastic replaces a worn or broken stop to restore proper drawer alignment and function. What it does:

• Stops and anchors the refrigerator drawer/divider to prevent shifting during normal use
• Restores correct drawer travel and alignment when the original stop is cracked or missing
• Helps maintain organized storage by keeping divider panels in place
• Works with compatible OEM drawer and divider assemblies to ensure proper fit

• One stopper divider part as shown

• Basic hand tools may be required; inspect mounting area for debris or damaged clips before installing
• Align and snap or slide the stopper into the factory location until it seats securely
• Do not force parts into place; replace damaged clips or supports if the stopper will not seat properly
• Unplug or power off the appliance before inspecting interior components for safety

This rubber grommet cushions and protects small appliance wires, hoses, or components where they pass through panels or openings. It helps prevent chafing and vibration wear for quieter, longer-lasting operation. What it does:

• Cushions wiring or tubing where it passes through sheet metal to prevent rubbing and damage
• Reduces vibration noise from loose fittings or contact points
• Holds harnesses or hoses in position to maintain proper routing
• Helps keep openings sealed against dust and debris around routed components

• Disconnect appliance power (and water if applicable) before replacing parts
• Remove the original grommet and install the new grommet in the same orientation; ensure the wire/hose seats fully in the grommet
• Inspect surrounding wiring, hoses, and mounting holes for damage and replace if needed
• Use only the specified replacement grommet; do not modify with adhesives or solvents unless manufacturer guidance allows

This right-side lower freezer drawer slide allows the freezer drawer to open and close smoothly and keeps the drawer aligned. Replaces a worn or damaged slide to restore stable drawer operation and prevent sticking or sagging. What it does:

• Guides and supports the lower freezer drawer for smooth in-and-out movement
• Replaces a broken, bent or worn right-side slide that causes the drawer to bind or drop
• Restores proper alignment so the drawer seals and closes evenly
• Works with the factory mounting points for a direct replacement

• Disconnect power to the appliance before removing drawers or service panels
• Remove the freezer drawer to access slide mounting screws; keep track of hardware
• Use appropriate hand tools; avoid forcing components to prevent damage

The Freezer Lower Slide is an OEM replacement part for GE refrigerators. It is designed to provide smooth and easy movement of the freezer drawer, allowing for convenient access to your frozen goods.

A bad freezer lower slide can occur due to factors such as wear and tear, damage, or misalignment. If you notice symptoms such as difficulty in sliding the freezer drawer, a loose or broken slide, or an unstable freezer compartment, it may indicate a faulty or malfunctioning left freezer lower slide.

Symptoms of a bad freezer lower slide include:

• Difficulty in sliding the freezer drawer
• Loose or broken slide
• Unstable freezer compartment

Restore your refrigerator's freezer drawer by replacing the faulty left freezer lower slide with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Icemaker Fill Cup is an OEM replacement part for GE refrigerators responsible for directing the water flow into the icemaker, allowing for the creation of ice cubes. It securely attaches to the icemaker, preventing any leaks or spills that could disrupt the ice production.  

A bad fill cup can occur due to several factors. Common causes include cracks, damage, or wear and tear over time. If you notice symptoms such as leaks around the icemaker, improper ice production, or water overflow, it may indicate a need to replace the fill cup.

Symptoms of a bad fill cup include:

• Leaks around the icemaker area
• Insufficient or inconsistent ice production
• Water overflow or spills

Restore your refrigerator's ice-making capabilities by replacing the faulty fill cup with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Icemaker is an OEM component specifically designed for GE refrigerators. Located within the freezer compartment, the icemaker automatically produces batches of ice for convenient access.

Causes of a bad icemaker can include wear and tear of mechanical parts from years of producing ice. Mineral buildup may also clog components and impact performance over time.

Symptoms of a bad icemaker include:

• Failure to produce ice or very slow production  
• Ice cubes joining together in clumps or odd shapes
• Loud grinding sounds emanating from the assembly
• Leaks or water drips detected around the unit

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This right-side freezer slide holder secures the freezer shelf/slide in place so drawers and shelves glide smoothly and stay supported. A direct-fit replacement when the original holder is cracked, broken or missing. What it does:

• Anchors the freezer slide/shelf on the right side to prevent sagging or detachment
• Restores proper alignment so drawers open and close without catching
• Helps eliminate noise or wobble caused by a damaged holder
• Fits the OEM mounting points for a secure, stable replacement

• Designed for straightforward replacement; remove the freezer shelf or drawer to access the mounting area
• Use basic hand tools; avoid forcing broken plastic parts to prevent further damage
• Disconnect power if removing any interior panels near electrical components
• Inspect adjacent slides and hardware and replace any damaged pieces for best results

The Freezer Slide Holder is an OEM replacement part for GE refrigerators. It is designed to securely hold and support the freezer slide on the left side, ensuring smooth and effortless movement of the freezer drawer.

A bad freezer slide holder can result from wear and tear, damage, or misalignment. If you encounter symptoms such as a loose or broken holder, difficulty in sliding the freezer drawer, or an unstable freezer compartment, it may be an indication of a faulty or malfunctioning left freezer slide holder.

Symptoms of a bad freezer slide holder include:

• Loose or broken holder
• Difficulty in sliding the freezer drawer
• Unstable freezer compartment

Restore your refrigerator's freezer drawer by replacing the faulty left freezer slide holder with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

A #8-18 x 9/16-inch hex washer head screw used to secure panels and components in appliances. Provides a proper fit for fast, reliable fastening when replacing missing, damaged, or stripped screws. What it does:

• Secures panels, brackets, and trim to keep components aligned and stable.
• Restores proper fastening when threads are stripped, the original screw is missing, or a head is damaged.
• Helps stop rattling or loose parts caused by worn or broken fasteners.
• Fits applications requiring a #8-18 thread with a 9/16" length and hex washer head style.

• Verify thread size, head style, and length before installation.
• Use the correct hex driver or socket to avoid cam-out or head damage.
• Do not overtighten; snug until secure to avoid stripping threads or deforming parts.
• Disconnect power and follow appliance-specific safety steps.

This is a single #10-18 x 3/4 inch flat-head screw used to secure panels and components in appliances. It replaces worn or missing fasteners so parts stay properly mounted and aligned. What it does:

• Fastens appliance panels, brackets, and components with a flat-head finish for flush mounting
• Replaces stripped, rusted, or missing screws that cause loose or rattling parts
• Provides a secure threaded connection for consistent operation
• Compatible where a #10-18 thread, 3/4" length flat-head screw is specified

• One (1) screw, #10-18 x 3/4 in., flat head

• Use the correct screwdriver bit (flat or Phillips depending on head style) and avoid over-tightening to prevent stripped threads
• Disconnect power to the appliance and follow manufacturer safety procedures when accessing internal components
• Dispose of damaged hardware and replace with matching specifications for safe operation

This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:

• Secures access panels, mounting brackets, and small assemblies
• Restores proper alignment and reduces rattling or vibration
• Replaces stripped or damaged fasteners
• Keeps wiring and components held in place for safe operation

• Unplug the appliance or disconnect power before starting work
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts
• Replace corroded or damaged fasteners for best results

This housing wire is the replacement wiring housing used with the ice maker assembly in the freezer compartment. It protects and routes ice-maker wiring to help maintain reliable ice production and prevent wire chafing. What it does

• Protects and organizes ice maker wiring inside the freezer to prevent damage and shorts
• Helps maintain a secure connection between the ice maker and freezer harness
• Commonly replaced when wiring housing is cracked, torn, or allowing wire exposure
• Can resolve intermittent ice maker operation or electrical arcing caused by damaged wire insulation

• One housing wire assembly as shown

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Access may require removing the ice maker or freezer liner
• Handle wiring and connectors carefully to avoid damage; replace any worn connectors or clips

This screw fastens appliance panels, brackets, and trim so parts stay secure and aligned. Replace a missing, stripped, or rusty screw to stop rattles and restore a tight, factory fit.

• Secures covers, brackets, and trim to the appliance cabinet or liner
• Replaces missing, stripped, or corroded hardware
• Helps reduce vibration noise and loose or misaligned parts
• Maintains proper fit of guards, kickplates, or internal panels

• Disconnect power; turn off water supply if working near water lines
• Match to the original fastener to size and thread
• Start threads by hand to avoid cross-threading; tighten snugly, not excessively
• If threading into plastic, avoid overtightening to prevent damage