Parts for Ge ZISB480DXA: 03 - Fresh Food Door Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This pack contains twelve replacement screws used to fasten appliance panels, trim, and components. They restore secure mounting and help stop rattling, loose panels, and gaps for a safer, quieter appliance. What it does:

• Secures exterior and interior panels, brackets, and trim pieces
• Restores proper fit where missing or stripped screws cause movement or noise
• Helps maintain appliance alignment and prevents parts from vibrating loose
• Used for general-purpose repairs on compatible GE appliances

• Disconnect power or unplug the appliance before performing any internal repairs
• Use the correct screwdriver bit and avoid overtightening to prevent stripping threads
• Keep remaining screws in a labeled container for future service
• If a screw does not seat easily, stop and verify correct fit to avoid damage

This top hinge bushing helps the refrigerator door pivot smoothly and reduces metal-on-metal wear. Replacing a worn bushing restores quieter operation and helps the door align and close properly. What it does:

• Provides a low-friction mounting surface for the top hinge pin
• Reduces hinge noise, squeaks, and grinding when opening or closing the door
• Helps maintain proper door alignment and sealing by preventing excess play
• Prevents accelerated wear of the hinge pin and surrounding trim

• Always disconnect power to the appliance before starting any repair
• Support the door securely before removing the hinge to avoid injury or damage
• Inspect hinge pin and surrounding components; replace if heavily worn
• Hand-tighten fasteners, then torque to manufacturer specifications; avoid over-tightening plastic components

This is the gallon-size door bin for the fresh food compartment. It restores secure storage for large containers on the refrigerator door when the original bin is cracked, loose, or missing.

• Holds gallon jugs and tall bottles on the fresh food door
• Helps keep items organized and reduces tipping/spills
• Replaces a broken, warped, or missing door bin
• Corrects issues like the bin not seating, falling off, or reduced door storage

• Compare to your original and install in the same door position; many models use multiple bin widths
• Align rear hooks with the door liner slots and press down until fully seated
• Handle carefully to avoid stress cracks; do not overload after installation
• If the bin is very cold, allow it to warm to room temperature before snapping into place

Restore door storage with this door bin assembly. It replaces a cracked, warped, or missing bin so bottles, condiments, and small items stay organized, easy to grab, and less likely to tip or fall.

• Mounts on the inner door to hold jars, bottles, and condiments
• Restores proper fit when original bin tabs or edges are broken
• Helps keep items upright and reduces spills or rattling
• Common signs it's needed: cracked bin, broken front edge, bin falls off, lost door storage

• Empty the old bin; lift up and pull out of the door channels
• Align the new bin's tabs with the same door slots and press down until it seats securely
• Some bins are position-specific; match the size/shape to the original location
• Disconnect power if working near lighting or controls; handle plastic edges carefully

This replacement dairy bin restores a sealed, organized compartment inside the refrigerator door so you can keep butter, cheese and small items contained and easy to access. Designed to match the original door bin size and fit. What it does:

• Provides a covered compartment for dairy and small food items to prevent shifting and spills
• Replaces cracked, warped or missing door bins that no longer hold items securely
• Helps restore proper organization and usable storage space on the refrigerator door
• Fits into existing door rail slots and snaps into place like the original

• One dairy bin (48")

• Remove all contents from the door and empty the bin area before installing
• Align the bin with the door rail slots and press in until it snaps securely into place
• Inspect door rails for damage; replace rails if the bin does not seat properly
• No special tools required;

This replacement door gasket seals the perimeter of a side-by-side refrigerator door to keep cold air in and humidity out. Replacing a worn gasket restores a proper seal to help maintain stable temperatures and reduce frost and condensation.

• Creates an airtight seal between the door and cabinet to maintain set temperatures
• Helps prevent frost/ice buildup and sweating around the door opening
• Can resolve doors that won't fully seal or show visible gaps
• Replaces gaskets that are torn, cracked, shrunken, or warped

• Unplug the refrigerator; let the new gasket warm to room temperature. Soak in warm water if needed to relax folds.
• Remove the old gasket. Starting at the corners, press the new gasket fully into the door channel all the way around.
• Use low heat (hair dryer) sparingly to smooth waves and improve the seal—do not overheat.
• Adjust door alignment if necessary.

This top fresh-food door trim restores the finished edge and appearance of the refrigerator door. It replaces a scratched, dented or cracked trim piece to help the door look new again and maintain a proper seal edge. What it does:

• Covers and protects the top edge of the fresh-food door for a clean, finished look
• Replaces damaged or warped trim that can catch on cabinets or clothing
• Helps maintain correct door alignment and appearance after impact or wear
• Compatible with common top-door trim mounting clips and fasteners used by the manufacturer

• Remove power and open the door fully before starting; support the door if needed to avoid strain on hinges
• Installation typically requires removing a few trim screws or clips; handle carefully to avoid scratching the finish
• Use only manufacturer-recommended fasteners; do not force parts into place

This bottom door trim piece restores the lower exterior edge of the refrigerator door for a clean, finished look and helps keep the door sealed and aligned. It's a direct-fit cosmetic/trim replacement. What it does

• Replaces damaged, cracked or dented bottom door trim to improve appearance
• Helps maintain door edge alignment and prevents gaps along the bottom
• Stops drafts and reduces the chance of debris entering the door edge area
• Useful when the original trim is loose, warped, or missing mounting tabs

• One bottom door trim piece

• High-level replacement; usually attached with clips or screws—remove door trim carefully to avoid scratching finish
• Verify orientation (left/right if applicable) before fastening
• Wear gloves to protect hands and avoid fingerprints on finished surfaces
• If mounting clips or fasteners are damaged, replace them separately.

Replacement screw that secures panels and internal components, helping stop rattles and keep parts aligned. Use it to replace stripped, rusted, or missing fasteners and restore a secure fit. What it does:

• Secures panels, trim, or internal parts to prevent movement and vibration.
• Replaces worn, corroded, or missing screws that cause loose panels or rattling.
• Restores proper alignment for doors, covers, and mounted components.
• Provides a simple hardware fix that helps maintain safe, stable operation.

• Always disconnect power to the appliance before accessing internal components.
• Use the correct screwdriver or bit to avoid stripping the head; apply firm but controlled torque.
• Verify screw length, head style, and thread type match the original before installation.
• If threads are damaged, replace with a matching OEM screw rather than over-tightening.