Parts for Ge GDE25EGKARBB: Fresh Food Door Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Fastener Handle Assembly is an OEM part for GE refrigerators, specifically designed to securely attach the refrigerator or freezer handle to the door. This assembly includes the necessary components, such as screws or bolts, brackets, and possibly end caps, depending on the design, to ensure a sturdy and durable connection between the handle and the door. 

Causes for a Fastener Handle Assembly to fail include normal wear and tear from repeated use, excessive force applied to the handle, or corrosion of metal parts due to moisture and refrigeration environment.  

Symptoms of a bad Fastener Handle Assembly include:

• A loose handle that moves or wobbles when touched or used.
• Difficulty in opening the refrigerator or freezer door due to a compromised handle attachment.
• Visible damage or wear to the components of the fastener assembly 

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This stop door closes the refrigerator dispenser opening to help keep cold air in and protect the dispenser area from debris. Replacing a damaged stop door restores proper sealing and smooth dispenser operation. What it does:

• Seals the dispenser opening when not in use to reduce cold-air loss
• Helps prevent debris and pests from entering the dispenser chute
• Works with the dispenser actuator/lever to open and close the door during dispensing
• A worn or broken stop door can cause visible gaps, drafts, or debris falling into the dispenser

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser bezel or inner liner panels
• Handle the door carefully to avoid scratching or breaking the mounting tabs
• Verify proper alignment and actuator engagement before reassembling

The Hinge Bushing is an OEM part for GE refrigerators designed to fit within the hinge assembly of your refrigerator, providing support and smooth movement for the door.

A bad hinge bushing can be caused by regular wear and tear over time or damage due to mishandling or impact. If you notice that your refrigerator door is not opening or closing smoothly, or if it feels loose or wobbly, it may indicate a problem with the hinge bushing.

Symptoms of a bad hinge bushing include:

• Difficulty in opening or closing the refrigerator door
• Door not staying securely closed
• Door sagging or misaligning with the refrigerator frame

Replace your faulty hinge bushing with this genuine OEM part to restore your refrigerator door. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This full-width door shelf bin restores secure, organized storage on your refrigerator door. Replace a cracked, loose, or missing bin so bottles and condiments stay in place and you regain usable space.

• Provides full-width storage on the door for bottles, jars, and condiments
• Replaces bins that are cracked, warped, or won't stay seated on the door tabs
• Helps prevent items tipping or falling when opening/closing the door
• Common symptoms: broken plastic, bin falls off, reduced door storage capacity

• Remove items from the old bin and lift it up and out of the door slots/rails
• Align the new bin's hooks with the door rails, then lower and press down until fully seated
• Confirm the bin is secure before loading; distribute weight evenly and avoid overloading
• Use care—broken plastic edges can be sharp

This door shelf module replaces a damaged or missing bin on your refrigerator door, restoring secure, organized storage for condiments, jars, and bottles. It snaps into the door liner to keep items accessible and in place.

• Provides on-door storage to hold bottles, jars, and condiments securely
• Replaces cracked or broken bins and restores usable door space
• Helps correct poor fit when mounting tabs are worn or broken
• Common symptoms: bin cracked, won't stay seated, sags, or items tip/fall

• Remove items from the existing bin and open the door fully
• Lift the old bin straight up to disengage it from the door rails or tabs
• Align the new module with the mounting slots, then lower/press until it locks in place
• Confirm a secure fit before reloading items

The Force Closure is an OEM part for GE refrigerators responsible for ensuring a secure and tight closure of the refrigerator door, keeping the cold air inside and maintaining proper temperature levels.

A bad force closure can be caused by normal wear and tear or damage due to mishandling or impact. If you notice that your refrigerator door is not closing properly or if there is a gap between the door and the refrigerator body, it may indicate a problem with the force closure.

Symptoms of a bad force closure include:

• Difficulty in fully closing the refrigerator door
• Door not staying securely closed
• Excessive condensation or frost buildup around the door seal
• Uneven or inconsistent cooling inside the refrigerator

Replace your faulty force closure with this OEM part to restore your refrigerator door. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.