Parts for Ge DFSF9VKBABB: 02 - Fresh Food Doors Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This magnet assembly replaces the magnetic strip that helps the refrigerator door seal stay tight, improving door closure and helping the appliance maintain proper temperature and efficiency. What it does:

• Replaces the magnetic sealing strip in the door gasket to help the door stay closed
• Restores a strong door seal to reduce cold air loss and limit frost buildup
• Helps prevent warm-air leaks that can cause the compressor to run more often
• Addresses symptoms such as a door that won't fully latch, visible gaps at the seal, or excessive frost in the freezer

• Disconnect power to the appliance before beginning any work
• Remove door trim or gasket; the magnet may snap or slide into a channel or require adhesive
• Handle the gasket and magnet carefully to avoid tearing or misalignment; ensure the magnet sits evenly along the door edge

This side door handle assembly is made for use on refrigerators. This component is used to open and close the refrigerator door. There are two of these handles on each refrigerator unit. One goes on the freezer door and the other on the refrigerator door. This part only includes one handle.This component is held into place with screws. If the screws and the handle become stripped, a new handle will be needed. The replacement process is easy and only requires a screwdriver. Since the door will need to be open during this process, make sure that any food that will deteriorate is placed in a temperature-safe location.The side door handle assembly is compatible with refrigerators that are manufactured by both GE and Samsung brands. It is sold individually and is a genuine OEM part that has been sourced directly from the manufacturer.

This ice chute cap gasket seals the ice chute cap to help keep ice contained and reduce air or moisture intrusion in the dispenser area. It restores a tight, flexible seal for proper ice dispensing and storage. What it does:

• Seals around the ice chute cap to help prevent ice spills and migration
• Limits warm air and moisture from entering the ice compartment
• Helps reduce ice clumping and sticking by maintaining a stable chute seal
• Restores proper fit where a worn or torn gasket allows gaps

• Disconnect power to the appliance before inspecting or replacing the gasket
• Remove the chute cap carefully, clean mating surfaces, and press new gasket fully into place for an even seal
• Inspect surrounding trim for damage and handle the gasket gently to avoid tears
• If adhesive or fasteners are present on your model, use only OEM-recommended methods

This is an ice chute and funnel assembly for refrigerators with ice dispensers on their doors. The chute opens upon the user's command input and releases ice into a glass or other container placed underneath it. With use, because of misuse, or as a result of accidental damage, part or all of the ice chute door and funnel may malfunction or fail entirely. When this happens, a replacement part is required to continue using the ice dispensing feature.If the ice chute no longer dispenses ice, or if it is dispensing too much or too little ice, it's a good indication that there is something wrong with this part of the appliance. It's a quick repair. It is always recommended to unplug the device before beginning the replacement. Move any food that could spoil while the repair is being completed.This refrigerator ice dispenser ice chute door and funnel assembly is a genuine OEM replacement part. It is sourced directly from the manufacturer. It is sold as an individual unit and made of durable materials. The replacement part is compatible with several models of refrigerators manufactured by General Electric, Hotpoint, and RCA.

This cam engages the door hinge to give a refrigerator door a controlled, self-closing action that helps keep the door shut and maintain internal temperatures. It's a direct-fit hinge cam used where the OEM calls for an auto-close cam. What it does:

• Guides the hinge to provide a smooth, late-stage self-closing action for the door
• Helps prevent doors from being left ajar, which can cause temperature loss or spoiled food
• Restores proper door alignment and closing feel when a worn cam causes sticking or drift
• Works as the hinge cam in assemblies designed for an auto-close mechanism

• One cam, auto close (right door hinge) as shown

• Designed to replace the original hinge cam; follow the appliance manufacturer's hinge/disassembly instructions
• Turn off power and remove food from the door area if work affects sealed compartments; unplug if required by model
• Handle edges and spring/tensioned hinge parts with care; springs can release suddenly

A self-tapping screw used to fasten appliance panels and components where a threaded hole is formed as the screw is driven. Provides a secure hold for trim, brackets, and light assemblies during repairs. What it does:

• Cuts its own mating thread in sheet metal or thin plastic to secure panels and brackets
• Helps hold trim, access panels, or internal components in place
• Commonly used where a tapped hole is not present or repair requires a replacement fastener
• Can prevent loose parts and rattles caused by missing or damaged screws

• Unplug the appliance before servicing to avoid electrical or mechanical hazards
• Use the correct screwdriver or bit to avoid stripping the screw head
• Start the screw straight and apply steady pressure; do not overtighten to avoid cracking plastic or stripping metal
• Replace only with the exact part number to ensure proper fit and function