Parts for Ge GFSF6PKBABB: 02 - Fresh Food Doors Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This is a self-tapping screw used to secure appliance panels and small components. It provides a reliable hold in sheet metal and plastic mounting points to restore proper fit and prevent rattling or loose parts. What it does:

• Fastens trim, brackets, and light-duty panels where a tapped hole is needed
• Creates its own threads in thin metal or plastic mounting points
• Helps stop vibration-related noise by securing loose panels
• Commonly used during repairs of control panels, inner liners, and external trim

• One tapping screw as shown

• Use the correctly sized screwdriver or bit to avoid stripping the head
• Drive straight and stop when snug; over-tightening can strip the mating material
• Turn power off and unplug the appliance before accessing internal panels
• If the original hole is damaged or oversized, consider using a slightly larger fastener or repair insert per manufacturer guidance

This magnet assembly replaces the magnetic strip that helps the refrigerator door seal stay tight, improving door closure and helping the appliance maintain proper temperature and efficiency. What it does:

• Replaces the magnetic sealing strip in the door gasket to help the door stay closed
• Restores a strong door seal to reduce cold air loss and limit frost buildup
• Helps prevent warm-air leaks that can cause the compressor to run more often
• Addresses symptoms such as a door that won't fully latch, visible gaps at the seal, or excessive frost in the freezer

• Disconnect power to the appliance before beginning any work
• Remove door trim or gasket; the magnet may snap or slide into a channel or require adhesive
• Handle the gasket and magnet carefully to avoid tearing or misalignment; ensure the magnet sits evenly along the door edge

This side door handle assembly is made for use on refrigerators. This component is used to open and close the refrigerator door. There are two of these handles on each refrigerator unit. One goes on the freezer door and the other on the refrigerator door. This part only includes one handle.This component is held into place with screws. If the screws and the handle become stripped, a new handle will be needed. The replacement process is easy and only requires a screwdriver. Since the door will need to be open during this process, make sure that any food that will deteriorate is placed in a temperature-safe location.The side door handle assembly is compatible with refrigerators that are manufactured by both GE and Samsung brands. It is sold individually and is a genuine OEM part that has been sourced directly from the manufacturer.

This refrigerator door gasket seals the edge of a French-door fridge to help keep cold air in and warm air out, reducing frost and helping the appliance maintain stable temperatures and efficient operation. What it does:

• Creates an airtight seal along a French-door refrigerator edge to prevent air leaks
• Helps reduce frost buildup and condensation by keeping cold air inside
• Can stop temperature fluctuations that cause food spoilage
• Often shows problems as visible gaps, a torn or warped seal, or difficulty keeping the door fully closed

• Inspect and clean the door margin and gasket seating area before installation to ensure a proper seal
• Handle the gasket carefully; align evenly and avoid stretching or pinching during installation
• Follow the refrigerator manufacturer's instructions and use the correct fasteners or retainers if required

The French Door Spring Pin is an OEM part for GE refrigerators. It plays a crucial role in the proper functioning of the refrigerator's French doors by ensuring they close securely and smoothly. This spring pin helps maintain the alignment and tension of the doors, contributing to the overall efficiency and usability of the appliance.

You should replace this French door spring pin if it becomes damaged or fails. Causes of a bad spring pin can include wear and tear over time, accidental damage, or corrosion due to exposure to moisture.

Symptoms of a bad French door spring pin include:

• Difficulty in closing the refrigerator doors
• Doors not staying securely closed
• Misalignment of the French doors
• Unusual noises when opening or closing the doors

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This small spring fits the French-door center mullion (flipper) assembly. It restores proper return tension so the flap folds and seals between the doors, helping the refrigerator close smoothly and maintain an effective door seal.

• Provides the return tension that lets the flipper/mullion open and retract with the door
• Helps the doors align and seal at the center to reduce air leaks
• Replaces a broken, bent, or weakened spring that can cause poor sealing
• Typical symptoms: flipper hangs loose or won't flip, door won't close fully, condensation at the center seam

• Disconnect power before servicing; use gloves to protect hands from sharp edges
• Open both doors and note the original spring orientation; taking a photo can help reassembly
• Control the stored spring tension when removing/installing to avoid snap-back
• After installation, verify the flipper moves freely and the center seal engages properly

This ice chute cap gasket seals the ice chute cap to help keep ice contained and reduce air or moisture intrusion in the dispenser area. It restores a tight, flexible seal for proper ice dispensing and storage. What it does:

• Seals around the ice chute cap to help prevent ice spills and migration
• Limits warm air and moisture from entering the ice compartment
• Helps reduce ice clumping and sticking by maintaining a stable chute seal
• Restores proper fit where a worn or torn gasket allows gaps

• Disconnect power to the appliance before inspecting or replacing the gasket
• Remove the chute cap carefully, clean mating surfaces, and press new gasket fully into place for an even seal
• Inspect surrounding trim for damage and handle the gasket gently to avoid tears
• If adhesive or fasteners are present on your model, use only OEM-recommended methods