Parts for Ge PFSS6SMXCSS: 02 - Fresh Food Doors Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The French Door Spring Pin is an OEM part for GE refrigerators. It plays a crucial role in the proper functioning of the refrigerator's French doors by ensuring they close securely and smoothly. This spring pin helps maintain the alignment and tension of the doors, contributing to the overall efficiency and usability of the appliance.

You should replace this French door spring pin if it becomes damaged or fails. Causes of a bad spring pin can include wear and tear over time, accidental damage, or corrosion due to exposure to moisture.

Symptoms of a bad French door spring pin include:

• Difficulty in closing the refrigerator doors
• Doors not staying securely closed
• Misalignment of the French doors
• Unusual noises when opening or closing the doors

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a French spring, or French divider door spring. It is used in refrigerators. This part allows the doors to open and close. It is located in the door of the fridge. A new French divider door spring may be needed if the door is stuck or is coming off of its hinges. This repair requires only a standard household toolkit. To replace the spring simply remove the old one and replace the part with a new, working piece. Be sure not to bend the spring while installing it as it will not fit in as the replacement part. This is a genuine OEM part. It is sourced directly from the manufacturer and is sold individually. This specific French Divider Door Spring is compatible with appliances made from General Electric.

This ice chute cap gasket seals the ice chute cap to help keep ice contained and reduce air or moisture intrusion in the dispenser area. It restores a tight, flexible seal for proper ice dispensing and storage. What it does:

• Seals around the ice chute cap to help prevent ice spills and migration
• Limits warm air and moisture from entering the ice compartment
• Helps reduce ice clumping and sticking by maintaining a stable chute seal
• Restores proper fit where a worn or torn gasket allows gaps

• Disconnect power to the appliance before inspecting or replacing the gasket
• Remove the chute cap carefully, clean mating surfaces, and press new gasket fully into place for an even seal
• Inspect surrounding trim for damage and handle the gasket gently to avoid tears
• If adhesive or fasteners are present on your model, use only OEM-recommended methods

This right-side refrigerator door foam assembly cushions and seals the door liner to help maintain proper internal temperatures and reduce air leaks. It replaces worn or damaged foam to improve cooling efficiency and reduce condensation risk. What it does:

• Fills the gap between the door liner and cabinet on the right side to help form a proper seal
• Helps reduce cold-air loss that can cause inconsistent temperatures or increased run time
• Minimizes moisture intrusion and potential frost build-up behind the liner
• Restores original fit where foam has deteriorated, torn, or compressed

• Disconnect power to the appliance before beginning any work
• Typically accessed by removing the door liner; use care to avoid damaging the liner or wiring
• Handle the foam gently and confirm correct orientation before securing

A self-tapping screw used to fasten appliance components where a threaded hole is not present. It provides a secure connection for panels, brackets, or internal assemblies to restore proper fit and reduce movement. What it does:

• Cuts its own mating thread as it is driven, securing plastic or thin metal components
• Holds panels, brackets, or assemblies in place to prevent rattling and misalignment
• Restores proper attachment when original screw is stripped, missing, or damaged
• Helps maintain electrical and mechanical component positioning for safe operation

• Use the correctly sized screwdriver or driver bit to avoid cam-out or head damage
• Drive straight and avoid over-torquing to prevent cracking or stripping the mating material
• If working near electrical components, disconnect power before servicing
• Replace like-for-like with the same part number to ensure proper fit and function

A self-tapping screw used to fasten appliance panels and components where a threaded hole is formed as the screw is driven. Provides a secure hold for trim, brackets, and light assemblies during repairs. What it does:

• Cuts its own mating thread in sheet metal or thin plastic to secure panels and brackets
• Helps hold trim, access panels, or internal components in place
• Commonly used where a tapped hole is not present or repair requires a replacement fastener
• Can prevent loose parts and rattles caused by missing or damaged screws

• Unplug the appliance before servicing to avoid electrical or mechanical hazards
• Use the correct screwdriver or bit to avoid stripping the screw head
• Start the screw straight and apply steady pressure; do not overtighten to avoid cracking plastic or stripping metal
• Replace only with the exact part number to ensure proper fit and function