Parts for Ge ZISP420DTBSS: 07 - Fresh Food Section Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The MWF Bypass is an OEM replacement part for GE refrigerators. Located within the bottom freezer compartment, the metal water filter bypass fitted assembly is responsible for directing filtered or unfiltered water flow to the ice maker and dispenser.

Causes for replacement may include faulty diverter components obstructing water flow to selections or resulting in water leaks.

Symptoms of a problematic bypass unit include:

• Inability to select filtered or unfiltered water from the dispenser
• Ice maker failure due to lack of water or poor water quality
• Mineral deposits accumulating on internal parts from unfiltered water

This OEM replacement bypass is compatible with GE, Hotpoint, and Profile model refrigerators.

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This HMI assembly is the user-interface control panel that lets you operate the appliance's front controls and display. Replaces a damaged or unresponsive control surface to restore button and display functionality. What it does:

• Provides the push-button controls and display interface for operating the appliance.
• Sends user commands to the main control board for functions like cycle selection, options, and start/stop.
• Commonly replaces units that are cracked, have unresponsive buttons, or show display errors.
• Helps resolve intermittent or failed front-panel communication when the HMI is the diagnosed fault.

• High-level replacement only; refer to factory service literature for step-by-step procedures.
• Disconnect power to the appliance before servicing to avoid shock or damage.
• Handle the assembly carefully to avoid damaging connectors, ribbon cables, or the display lens.

This clear ceiling light shield covers and protects the interior light assembly, helping diffuse light for even illumination and preventing direct contact with the bulb. It restores a finished look and safeguards the lamp area. What it does:

• Protects the interior light bulb from spills, dust and accidental contact
• Diffuses and softens light for more even refrigerator illumination
• Replaces cracked, discolored or missing ceiling shields that affect appearance
• Helps maintain proper clearance around the light assembly

• One clear ceiling light shield

• Disconnect power to the appliance before servicing to avoid shock
• Handle the shield carefully to avoid damage; it is typically plastic or acrylic
• Remove and replace using existing clips or mounting points; do not force or bend
• Use only the correct bulb type and size specified by the appliance manufacturer

The air damper monogram kit is used in refrigerators that include freezers. The main purpose of this component is to balance the way air flows when it leaves the evaporator fan housing. The device will often control how much cold air is moved into the fresh air compartment. It can also be used to move cold air from the refrigerator into the freezer. If this part is damaged, cold air may not go where it should and some parts of the refrigerator may become too warm.If this part is damaged or not working, it should be replaced. Disconnect the refrigerator from power and open the door to find the air damper monogram. It is located where the cold air enters the fresh food area. Access the housing and inspect it for damage. It can be removed to get to the damper components. Check the sensing bulb for issues before removal. Install all parts of the kit or only the ones that are damaged before reassembling the appliance.This is a genuine OEM air damper monogram kit for use with General Electric refrigerators. It is priced individually and sourced straight from the manufacturer.

The air damper monogram kit is used in refrigerators that include freezers. The main purpose of this component is to balance the way air flows when it leaves the evaporator fan housing. The device will often control how much cold air is moved into the fresh air compartment. It can also be used to move cold air from the refrigerator into the freezer. If this part is damaged, cold air may not go where it should and some parts of the refrigerator may become too warm.If this part is damaged or not working, it should be replaced. Disconnect the refrigerator from power and open the door to find the air damper monogram. It is located where the cold air enters the fresh food area. Access the housing and inspect it for damage. It can be removed to get to the damper components. Check the sensing bulb for issues before removal. Install all parts of the kit or only the ones that are damaged before reassembling the appliance.This is a genuine OEM air damper monogram kit for use with General Electric refrigerators. It is priced individually and sourced straight from the manufacturer.

This Top LED board is the interior illumination module that provides the fridge's top-area lighting, restoring clear, even light for food visibility and convenience. What it does:

• Replaces a failed or dim top-area LED lighting assembly
• Restores even, bright interior illumination when lights flicker, are dim, or won't turn on
• Connects to the refrigerator's existing wiring harness and mounts under the top interior panel
• Works with the refrigerator's door/light switch to turn lights on and off as designed

• Disconnect power to the appliance before starting any repair
• Remove interior top trim/panel to access the board; handle the PCB and LEDs by the edges
• Unplug the wiring connector before removing the fasteners; install the new board in reverse order

This halogen light bulb installs in the refrigerator's vertical light column to restore bright, even interior illumination. Replace a failed bulb to keep shelves and drawers clearly visible whenever you open the door. What it does:

• Provides interior lighting as part of the column assembly when the door opens
• Common symptoms: interior light is out, flickers, or appears noticeably dim
• Bulb may show darkening or a broken filament
• Replacing the bulb restores normal brightness inside the compartment

• 1 halogen light bulb

• Unplug the refrigerator or switch off power at the breaker before service
• Allow the old bulb and surrounding area to cool completely
• Handle halogen bulbs with clean gloves or tissue; avoid touching the glass
• Align with the socket like the original and do not force; reinstall any cover or lens