Parts for Ge CNE25SSKAKSS: Fresh Food Section Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This light housing assembly replaces the interior light enclosure that holds the socket and lens, restoring safe illumination inside the appliance. It keeps the bulb secure and protects components from moisture and debris. What it does:

• Houses the light socket and lens to direct and protect interior lighting
• Restores a broken, cracked, or missing light cover that causes poor illumination
• Replaces a housing with a loose or damaged socket that causes intermittent lighting
• Helps prevent direct contact with the bulb and protects wiring from spills

• One light housing assembly

• Disconnect power to the appliance before starting any work
• Typically mounts with snap tabs or screws; handle the lens carefully to avoid cracking
• Replace bulb with correct type and rating per your appliance manual

This air tower assembly directs and channels cold air inside the fresh-food compartment to help maintain even cooling and proper airflow. It replaces a damaged or cracked duct that can cause uneven temperatures. What it does

• Routes conditioned air from the evaporator into the fresh-food section for consistent cooling.
• Helps prevent warm spots and reduces localized thawing or food spoilage.
• Restores proper airflow if existing tower is cracked, broken, or blocked.
• Can reduce frost build-up caused by disrupted airflow pathways.

• Disconnect power before starting any service to avoid electrical shock.
• Remove interior shelves and panels as needed for access; handle plastic parts gently to avoid cracking.
• Inspect surrounding seals and ducts during replacement; secure with factory fasteners only.

This replacement air tower assembly is the vertical duct that channels chilled air through the refrigerator compartment. Replacing a damaged tower restores proper airflow to help maintain even temperatures and consistent cooling from top to bottom.

• Directs cold air from the evaporator to vents in the fresh food section
• Helps balance temperatures and reduce warm spots
• Often replaced when the original is cracked, broken, or warped
• Common symptoms: weak airflow from refrigerator vents and uneven cooling in the fresh food compartment

• Disconnect power to the refrigerator before servicing.
• Remove shelves and bins for access; release tabs or remove screws securing the old tower.
• Transfer any clips or sensors from the original, if present; seat and secure the new tower.
• Restore power and verify airflow from the vents.

The Temperature Sensor Seal is an OEM part for GE refrigerators. This seal is designed to protect the temperature sensor from moisture and other environmental factors that could affect its accuracy and longevity. By providing a barrier against the harsh conditions within a refrigerator, such as humidity and temperature fluctuations, this seal ensures that the sensor can accurately monitor and control the refrigerator's internal temperature.

Causes of a malfunctioning Temperature Sensor Seal can include wear and tear over time, degrading the seal's effectiveness. Physical damage like tears or punctures can allow moisture to reach the sensor. Improper installation may leave gaps or loose areas around the sensor, compromising the seal.

Symptoms of a bad Temperature Sensor Seal include:

• Inaccurate temperature readings.
• Condensation or frost near the sensor location.
• Frequent cycling or unusual patterns in the refrigerator's cooling process.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This water filter cover is the replacement housing that secures and seals the refrigerator's water filter cartridge, keeping the filter in place and helping prevent leaks and debris entry. Restores proper fit and appearance. What it does:

• Secures the water filter cartridge in the filter bay to maintain a proper seal
• Helps direct water flow to and from the filter for normal dispensing and icemaking
• Protects the filter from dust and debris that can affect water quality
• Can reduce or stop minor leaks caused by a cracked or missing cover
• Restores the finished look of the filter area

• One water filter cover

• Turn off refrigerator water supply and dispense any remaining water before starting
• Disconnect power or follow manufacturer safety instructions to avoid electrical hazard
• Typically installs by aligning and snapping or fastening into the filter compartment; keep original fasteners if present
• After installation, turn water back on and check for leaks; run water through dispenser to purge air

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Cold Water Tank is an OEM replacement part for GE refrigerators. This tank is responsible for storing and supplying cold water to the dispenser, keeping it cool and ready for dispensing. 

A bad cold water tank can occur due to regular use or accidental damage. If you notice symptoms such as lukewarm or room temperature water coming from the dispenser, reduced water flow, or leaks around the tank area, it may indicate a need to replace this part.

Symptoms of a bad cold water tank include:

• Lukewarm or room temperature water from the dispenser
• Reduced water flow or weak water pressure
• Leaks or drips around the tank area

Restore your refrigerator by replacing the faulty cold water tank with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Water Filter Head and Insulation Assembly is an OEM replacement part for GE refrigerators. This assembly is responsible for securely holding the water filter in place and insulating it from external temperature changes, which helps maintain the temperature of the filtered water, ensuring that it remains cool.

A bad water filter head and insulation assembly can occur due to wear and tear over time or damage caused by mishandling or accidents. If you notice symptoms such as water leaks around the filter area, reduced water flow, or a decrease in the effectiveness of the water filter, it may indicate a need to replace this assembly.

Symptoms of a bad water filter head and insulation assembly include:

• Water leaks around the filter area
• Reduced water flow or weak water pressure
• A decrease in the taste or quality of the filtered water

Restore you refrigerator by replacing the faulty water filter head and insulation assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The MWF Bypass is an OEM replacement part for GE refrigerators. Located within the bottom freezer compartment, the metal water filter bypass fitted assembly is responsible for directing filtered or unfiltered water flow to the ice maker and dispenser.

Causes for replacement may include faulty diverter components obstructing water flow to selections or resulting in water leaks.

Symptoms of a problematic bypass unit include:

• Inability to select filtered or unfiltered water from the dispenser
• Ice maker failure due to lack of water or poor water quality
• Mineral deposits accumulating on internal parts from unfiltered water

This OEM replacement bypass is compatible with GE, Hotpoint, and Profile model refrigerators.

This LED light board assembly provides the replacement LED module that illuminates the control/display area. Restores visibility of panel indicators and display lighting for proper operation and ease of use. What it does:

• Replaces the LED light module that backlights the control/display area and status indicators.
• Restores faded or non-lit control panel lighting that makes buttons and icons hard to see.
• Can resolve intermittent or no-light symptoms caused by a failed LED board.
• Works with the original housing and connectors for a direct-fit replacement.

• One LED light board assembly as shown

• Disconnect power to the appliance before starting any repair to avoid shock.
• Handle the board by edges; avoid touching LED lenses or circuitry to prevent damage.
• Verify connector orientation and seating; secure mounting screws to prevent rattle.

This light shield is the protective interior cover that helps protect the refrigerator light and direct interior illumination for better visibility. It replaces a cracked, yellowed, or missing lens to restore a finished look. What it does:

• Covers and protects the refrigerator bulb or lamp from impacts and food contact
• Helps diffuse and direct light for more even interior illumination
• Restores a clean appearance if the original shield is cracked, discolored, or missing
• Can reduce glare from the bulb and prevent debris buildup on the lamp

• One light shield / interior lamp cover

• Disconnect power to the appliance before replacing the shield
• Remove shelves or clips that obstruct access, then snap or slide the shield into place
• Inspect the bulb and socket while replacing the shield; replace the bulb if needed
• Handle the shield carefully to avoid scratches or cracks; use only genuine replacement parts

This grille sensor is the temperature-sensing probe that monitors heat in the appliance grille area to help controls regulate cooking temperature and safety features. It provides accurate feedback so the oven or grill can maintain set temperatures. What it does:

• Senses temperature in the grille/grill area and sends readings to the control board
• Helps the appliance maintain consistent cooking or broiling temperatures
• Can cause temperature-related errors or inconsistent heating when failed
• Common symptom: oven or broil function runs too hot, too cool, or shows error codes related to temperature sensing

• One grille sensor

• Disconnect power to the appliance before any service to avoid shock or injury
• Handle the sensor carefully; avoid bending or contaminating the sensing tip
• Route and secure the sensor wiring as OEM designed to prevent heat or pinch damage

This top LED cover is the replacement light lens that protects and diffuses the refrigerator's top LED assembly for even interior lighting and a finished look. Replaces a cracked, yellowed, or missing lens to restore light distribution. What it does:

• Protects the LED module from dust, moisture, and impacts
• Diffuses and softens LED output for even interior illumination
• Prevents glare and visible hot spots from exposed LEDs
• Helps maintain a clean, finished appearance inside the appliance
• Can address symptoms like uneven lighting, visible LED bulbs, or a cracked/warped lens

• Disconnect power to the appliance before starting any work.
• Handle the lens gently to avoid scratching or cracking; wear gloves if needed.
• Removal/installation typically involves releasing retaining clips or removing a few screws—retain fasteners for reuse.
• Align the cover over the LED assembly and secure until it snaps or fasteners are tightened; test lighting after restoring power.

This dispenser internal assembly replaces the internal housing that supports the dispenser controls, lever, and water/ice passage—restoring proper dispensing and preventing leaks or stuck levers. Fits refrigerator dispenser systems that use this OEM assembly. What it does

• Provides the internal housing and guide for the dispenser lever, actuator, and water/ice pathway
• Secures switches and valves used to control water or ice dispensing
• Helps prevent leaks by aligning water passages and seals
• Restores proper lever action when the dispenser is jammed, loose, or misaligned
• Addresses symptoms such as no water/ice dispense, stuck or loose dispenser lever, or visible leaks from the dispenser area

• One dispenser internal assembly

• Disconnect power and shut off the water supply before beginning repair
• Handle plastic components gently to avoid cracking; keep fasteners and small parts organized
• Some models require removing the inner door panel or control module to access this assembly

This switch actuator is the small control lever that presses a switch inside the appliance control panel so the user's button or dial can change settings. It restores reliable physical actuation for responsive controls. What it does

• Transfers user input from a button or dial to the internal switch so circuits can change state
• Replaces a broken, worn, or missing actuator that causes unresponsive buttons or stuck controls
• Helps restore proper control-panel operation without replacing the whole switch assembly
• Works with the original internal switch mechanism to maintain OEM fit and function

• Disconnect power to the appliance before any service to avoid shock or injury.
• Access the control panel or console per the service guide; actuator is usually secured to the front control or switch housing.
• Remove only the damaged actuator and install the replacement; do not force parts or modify components.