Parts for Ge ZISB480DMC: 08 - Fresh Food Shelves Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This snack pan assembly is a replacement storage pan designed to hold snacks and small items in the appliance's refrigerated compartment, restoring organized storage and preventing spills from a cracked or damaged pan. What it does

• Provides a dedicated, removable tray for storing snacks and small foods
• Slides into the refrigerator compartment tracks for easy access and removal
• Replaces cracked, warped, or worn snack pans that cause spills or poor fit
• Restores proper storage function and helps keep interior shelves tidy

• Always unplug the appliance or shut off power before installing parts
• Remove food from the compartment and clear surrounding shelves for access
• Handle edges carefully; align the pan with the tracks and slide into place until secured
• Verify smooth operation and proper seating before returning contents to the compartment

This pan rear seal replaces the worn gasket that seals the back of the refrigerator drain/collector pan to stop water from escaping and reduce leaks under the appliance. It restores a proper watertight fit at the pan rear. What it does:

• Seals the rear edge of the drain/collector pan to direct condensate into the drain system
• Helps prevent water pooling or dripping onto the cabinet or floor
• Reduces moisture that can cause odors or attract pests
• Commonly replaced when original seal is cracked, brittle, or missing

• One pan rear seal

• Disconnect power to the appliance and turn off the water supply before starting
• Remove access panels or the evaporator cover as needed to reach the pan; support components per OEM instructions
• Clean and dry mating surfaces before installing the new seal for best adhesion and fit
• If adhesive is used or the old seal is stuck, carefully remove residue and wear gloves and eye protection

This front pan seal replaces the worn gasket that seals the refrigerator's front drip/pantry pan, helping keep water contained and directing drainage properly to prevent puddling and odors. Fits the pan edge at the fridge base. What it does

• Creates a tight edge seal along the front of the refrigerator drain/drip pan to keep condensation and defrost water contained.
• Helps direct water toward the drain channel so it can evaporate or flow to the condenser pan.
• Reduces chance of water pooling on the floor near the refrigerator base.
• Can improve odor control by preventing trapped moisture under the pan.

• One front pan seal.

• High-level swap: remove lower kickplate (if present), peel out the old seal and press the new seal into the pan groove; follow OEM instructions for your model.
• Use gentle, even pressure to seat the seal fully into the pan channel; avoid stretching the seal excessively.
• If adhesive is used by the model, only apply OEM-recommended adhesive in small amounts.
• Disconnect power or follow safety steps before working near electrical components.

A 6 x 1/2 inch pan-head Phillips screw used to fasten panels, trim, brackets and small assemblies on appliances. Replacing worn or missing screws restores secure mounting and reduces vibration or rattling. What it does:

• Fastens panels, brackets and trim where a 6 x 1/2 in. pan-head Phillips screw is required.
• Stops loose or rattling parts caused by missing, stripped or corroded screws.
• Provides the correct head profile for a Phillips driver to allow proper torque and seating.
• Used in non-structural fastening points on appliances.

• Always disconnect power and unplug the appliance before beginning repairs.
• Use the correct-size Phillips screwdriver to avoid cam-out and head damage.
• Do not over-tighten; over-torquing can strip threads or deform mating parts.
• Inspect mating threads and replace damaged components before installation.

This drawer slide assembly supports and guides your refrigerator's drawer so it opens and closes smoothly. Replace a cracked or worn slide to restore proper alignment and stop sticking, dragging, or dropped drawers.

• Supports the drawer and provides smooth sliding action
• Maintains alignment to prevent binding or popping off the track
• Replaces cracked, warped, or seized slide components
• Typical symptoms: drawer hard to open/close, crooked, or falls off

• Disconnect power before servicing
• Empty and remove the affected drawer and any obstructing shelves for access
• Remove fasteners securing the old slide; transfer any reusable brackets/clips from the original if applicable
• Align and secure the new slide, then verify the drawer engages both tracks and glides freely

This glass vegetable pan shelf provides a durable, easy-to-clean surface above the crisper area so produce and deli items sit flat and spills are contained for faster cleanup. It restores a level shelving surface after a cracked or missing shelf. What it does:

• Supports produce bins and food items for stable storage and stacking
• Creates a smooth, easy-to-clean surface to catch spills and drips
• Helps maintain proper airflow and organization inside the refrigerator
• Replaces cracked, chipped, or broken glass that risks contamination or injury

• Remove all food from the shelf area before installation
• Handle glass with care; wear cut-resistant gloves to avoid injury
• Slide the shelf into the existing side rails or clips until seated securely
• Replace hardware before use

This rear seal fits the vegetable/crisper pan and helps restore a proper seal at the back of the drawer to maintain humidity and reduce air leakage. Replacing a worn seal helps food stay fresh and the compartment perform as intended. What it does:

• Seals the back edge of the vegetable/crisper pan to help retain cold, humid air
• Reduces excess air exchange that can dry out produce or affect compartment temperature
• Prevents drafts and minimizes frost buildup near the drawer area
• Restores proper drawer fit and alignment when the original seal is torn or compressed

• One veg pan rear seal

• Disconnect power to the appliance before servicing
• Remove the crisper/vegetable drawer and lift out the pan to access the seal
• Peel off the old seal, clean the mounting surface, then press the new seal evenly into place
• Check drawer operation after installation; replace if the seal won't seat properly or the mounting surface is damaged

The showcase pivot provides the pivot point that supports the washer's showcase assembly, restoring proper alignment and stable rotation for smoother operation and reduced noise or wobble. What it does:

• Serves as the pivot/support for the washer showcase assembly so the basket or door rotates as designed
• Keeps the showcase aligned to prevent rubbing, binding or uneven movement
• Helps reduce vibration and noise caused by a worn or damaged pivot
• Worn pivots can cause visible misalignment, wobbling or unusual noises during spin cycles

• Disconnect power and water supply before beginning any repair
• Remove access panels and note orientation of the old pivot before removing
• Inspect surrounding parts and replace if damaged
• Reassemble securely; run a short test cycle to verify alignment and operation

This small replacement button glide restores smooth, reliable button movement on the appliance control panel, helping buttons press and release correctly for consistent operation. What it does:

• Provides a low-friction surface for control panel buttons to slide on
• Helps prevent buttons from sticking, binding, or feeling uneven
• Restores proper seating and tactile feedback for worn or damaged buttons
• Useful when buttons wobble, catch, or fail to make consistent contact

• Disconnect power (unplug or shut off circuit breaker) before servicing the control panel
• Typically accessible from the front control bezel; remove trim or key assembly as needed
• Handle small plastic parts carefully to avoid breaking tabs; reassemble trim in original order